Release Notes
Broadcom BCM440x
PXE (Preboot Execution Environment) Software
Copyright (c) 2000-2003 Broadcom Corporation
All rights reserved.
06/23/2003
basecode.lom: This image consists of the base code (BC) only, for use in
a split implementation for LOM applications.
This module should be programmed into the BIOS.
This base-code supports only the PXE software.
b44undi.lom: This image consists of the UNDI code only, for use in
a split implementation for LOM applications, where a
BC is present.
This module should be programmed into the BIOS.
b44pxe.lom : This is a monolithic image that consists of both the
BC and UNDI code. This image is intended for
LOM applications.
Revision History
================
Version 1.0.6 June 23, 2003
---------------------------
Fixes:
=======
1. Problem: (CQ #6369) & (#7435)
Cause: Link could not be established after boot/reset on
some switches. Link would occur intermittently. Possible
duplex mismatch could also occur.
Change: Updateded the autonegoation advertisement configuration for
resets & init code.
Impact: None.
v 1.0.5 - Fixed base code packet drop bug.
v 1.0.4 - Added multicast frame support.
v 1.0.3 - Removed 4 second non-bbs support delay. Expecting BBS support.
v 1.0.2 - Added media failure screen message.
v 1.0.1 - Increased performance.
v 1.0.0 - Fixed memory allocation bug.
v 0.0.3 - BETA:Fixed RIS bug & occasional switch compatibility problem.
v 0.0.2 - BETA:Release to fix timeout when copying ghost images.
v 0.0.1 - Engineering Release.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.