Information and Instructions about this download file ======================= File Description: Gateway(r) Memory Card Reader Driver Revision: 1.0.3.2 Operating System: Microsoft(r) Windows(r) XP Driver Part Number: D00341-001-001 Driver Date: 12/21/2005 ======================= Table of Contents ======================= Overview Installation Program Use Removal Troubleshooting Reason for Update Applicable Part Numbers ======================= Overview This document describes the steps necessary to install and configure the Memory Card Reader driver for the computers listed in the Applicable Part Numbers section of this document. Installation When installing the Digital Media Reader the following process must be followed: 1. Insert a media type (such as Secure Digital, MemoryStick, CompactFlash, and so forth) into the memory card reader. 2. From the Start menu, click Run. In the Run dialog box, type: C:\Cabs\D00341-001-001\v1.0.3.2_WHQL\Setup.exe. Click OK. 3. In the InstallShield Welcome dialog box, click Next. 4. Files copy. 5. In the InstallShield dialog box, click Finish. Removal 1. Insert a media type (such as Secure Digital, MemoryStick, and so forth) into the memory card reader. 2. From the Start menu, click Control Panel. 3. In Control Panel, click Add or Remove Programs. 4. In the Add or Remove Programs window, select Digital Media Reader, and then click Change/Remove. 5. Files remove. 6. Removal is complete. No further removal steps are necessary. Troubleshooting If you have difficulty during or after the driver installation, follow the removal procedure, and then re-install the drivers. 1. If the media is not inserted into the computer when the application is installed, the application does not load correctly and the media icon does not display in My Computer. 2. If the media is not removed prior to restarting the computer, the computer may try to continuously restart at POST or restart. Reason for Update This is the initial driver release. Applicable Part/Model Numbers 5552 - MX6635b 6316 - MX6638b 6317 - MX6640b 1008897 - MX6639bDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.