Information and Instructions about this download file ======================= File Description: Midway and Midway Plus Motherboard BIOS Update Revision: BF86510A.15A.0066.P07 Operating System: All Operating Systems Driver Part Number: Midway_P07 Date: 04/23/2004 ======================= Table of Contents ======================= Overview Identification Installation Removal Troubleshooting Reason for Update Applicable Part Numbers ======================= Overview This is the P07 BIOS for the Intel(r) BF86510A (Midway, Midway Plus, Midway 2 GV, and Midway 2 PE) motherboards. All previous updates are superseded by this update. Identification This BIOS is intended for USDA configurations using the Midway, Midway Plus, Midway 2 GV, and Midway 2 PE motherboards. Installation Prepare your computer Before updating your computer's BIOS, enter the current BIOS Setup Utility, and then write down each of the current settings in the event that this information is needed again after the upgrade. Note: The following instructions may vary dependent upon the operating system loaded on the computer. Performing the update 1. After you have downloaded and double-click the BIOS update file (Midway_P07.exe), the files self-extract and copy into the C:\Cabs\Midway_P07 folder on the hard drive. 2. Copy the contents of C:\Cabs\Midway_P07 to a bootable Windows 98 MS-DOS floppy disk. Note: A Windows XP disk with system files cannot be used to run the BIOS update. 3. Insert the floppy disk into the floppy disk drive, and then restart the computer. 4. At the command prompt, type: iflash.exe. Press the ENTER key on your keyboard. 5. At the command prompt, press ENTER to continue. 6. To select Update Flash Memory Area from a file, press ENTER. 7. To select "Update System BIOS", Press ENTER. 8. Press the TAB key to select file P07-0043.BIO, and then press ENTER. 9. Press ENTER to continue. 10. Press ENTER to confirm BIOS installation, and then remove the floppy disk. 11. The computer displays a dialog box prompting that the screen will go blank and tones will be heard. Do not restart the computer or turn off power while the BIOS is being flashed. Removal A motherboard must have a BIOS to operate, therefore there is no removal procedure. Applicable Part Numbers Midway (E-4100): 2519040, 2520285, 2520576, 2520852, 2520901, 2520914, 2521155, 2521191 Midway Plus (E-4100): 2519041, 2520284, 2520321, 2521130 Midway GV: 2521362 Midway PE: 2521363Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.