FLASH PROCEDURE: 1) Make a bootable USB key at first. 2) Uncompress the zip file to the USB key. 3) Boot the system with USB key. 4) Please execute EL8.bat. Phoenix Phlash16 Utility will start. 5) If it finished normally, the system will auto reboot. 6) After power on the system, you must set up CMOS information by following step. a) Start BIOS Setup Utility by pressing Del key at message screen. b) Confirm the BIOS version at Main Menu. c) After initializing by Exit-Load Setup Defaults, Set Date/Time at Main Menu, then reboot by Exit-Exit Saving Changes. 7) Flash process would have finished successfully.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.