1. pserial-x64.zip Driver
2. pparns.inf File Contents

pparns.inf Driver File Contents (pserial-x64.zip)

;********************************************************************
;*
;*      File:   pparns.inf
;*
;*  Description:
;*      Installer for Perle Speed LE non supported parallel ports for X64 based systems
;*
;********************************************************************

[version]
Signature=$CHICAGO$
Class=Unknown
ClassGuid={4D36E97E-E325-11CE-BFC1-08002BE10318}
Provider=%Perle_Systems%
CatalogFile.NTamd64=pserial.cat
DriverVer = 02/18/2011, 2.8.1.1

[DestinationDirs]
DefaultDestDir=11       ; LDID_SYS
Drv_XP.NT.Copy=12       ; LDID_DRIVERS

[ControlFlags]
;  Speed LE Adapters
ExcludeFromSelect = \
			PCI\VEN_155F&DEV_B011&SUBSYS_95131415,	\
			PCI\VEN_155F&DEV_B012&SUBSYS_95131415,	\
			PCI\VEN_155F&DEV_B021&SUBSYS_95131415,	\
			PCI\VEN_155F&DEV_B022&SUBSYS_95131415,	

			
;----------------------------------------------------------
; Drivers

[Manufacturer]
%Perle_Systems%=Perle,NTamd64

[Perle.NTamd64]     

; Speed LE PCI Adapters
%SPD1LENP_PCI.DeviceDesc%			= SPEEDLE_PCI_NS,	PCI\VEN_155F&DEV_B011&SUBSYS_95131415
%SPD2LENP_PCI.DeviceDesc%			= SPEEDLE_PCI_NS,	PCI\VEN_155F&DEV_B012&SUBSYS_95131415
%SPD1LENPEXP_PCI.DeviceDesc%		= SPEEDLE_PCI_NS,	PCI\VEN_155F&DEV_B021&SUBSYS_95131415
%SPD2LENPEXP_PCI.DeviceDesc%		= SPEEDLE_PCI_NS,	PCI\VEN_155F&DEV_B022&SUBSYS_95131415



; ***************  install non supported Perle Parallel Port *****************

[SPEEDLE_PCI_NS.NT]
CopyFiles=Drv_XP.NT.Copy


;-------------- Service installation
[SPEEDLE_PCI_NS.NT.Services]
AddService = pparallel, 0x00000002, pparallel_Service_Inst, pparallel_EventLog_Inst ;





; -------------- Parallel Port Driver install sections
[pparallel_Service_Inst]
DisplayName    = %pparallel.SVCDESC%
ServiceType    = 1              ; SERVICE_KERNEL_DRIVER
StartType      = 3				; SERVICE_DEMAND_START
ErrorControl   = 0              ; SERVICE_ERROR_IGNORE
ServiceBinary  = %12%\pparallel.sys
LoadOrderGroup = Parallel arbitrator

[pparallel_EventLog_Inst]
AddReg = pparallel_EventLog_AddReg

[pparallel_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\pparallel.sys"
HKR,,TypesSupported,0x00010001,7

[Drv_XP.NT.Copy]
pparallel.sys

[SourceDisksNames]
1=%drvDisk%,,

[SourceDisksFiles]
pparallel.sys=1


[Strings]
Perle_Systems                   = "Perle Systems Limited"
PortsClassName                  = "Ports (COM & LPT)"
drvDisk                         = "Perle Driver Disk or CDROM"

;-------------------------------------------------------------------------------------------
;	Speed LE
SPD1LENP_PCI.DeviceDesc			= "Perle SPEED1 LE - Parallel Port Not Supported"
SPD2LENP_PCI.DeviceDesc			= "Perle SPEED2 LE - Parallel Port Not Supported"
SPD1LENPEXP_PCI.DeviceDesc		= "Perle SPEED1 LE Express - Parallel Port Not Supported"
SPD2LENPEXP_PCI.DeviceDesc		= "Perle SPEED2 LE Express - Parallel Port Not Supported"

pparallel.SVCDESC               = "Perle Parallel port driver"