================================================================================
Perle SX Driver for Windows 2000\XP\Server 2003\Vista
Copyright 2004-2007 Perle Systems Limited
================================================================================
Driver release : 2.0.0
Date : June 2007
O/S Compatibility : Windows 2000 32-bit
Windows XP, 32-bit and 64-bit
Windows Server 2003, 32-bit and 64-bit
Windows Vista, 32-bit and 64-bit
================================================================================
Introduction
------------
The Perle SX Driver allows the SX family (SI/XIO, SX, SX+) of intelligent serial
multiport adapters to appear as standard "COM" devices on the supported systems.
================================================================================
Driver Installation/Upgrade Procedure
--------------------------------------
The driver package is a zip file. There is a version for each of the following
platforms:
x86 - 32-bit sx-x86.zip
amd64/x64 - 64-bit sx-x64.zip
itanium - 64-bit sx-ia64.zip
Unzip the appropriate file into a directory of your choice (i.e. \temp). This
directory is called the driver installation directory and contains the driver
files which can be used by the Add Hardware Wizard.
The directory also contains an install program which can be used instead of the
Hardware Wizard. The following section describes the installation process using
this file.
The install programs have the following names depending on the platform.
x86 - 32-bit sx-setup-x86.exe
amd64/x64 - 64-bit sx-setup-x64.exe
itanium - 64-bit sx-setup-ia64.exe
Install the required SX Host cards into the PC. Connect the SX device
concentrators to the host card and power on. When the PC boots, the OS will
attempt to install drivers for the new hardware. Hit cancel when each of cards
are found.
Now run the driver install program that is appropriate for the PC platform. The
software will create an installation sub-directory in the "Program Files"
directory and then run the UpdateV2 program which will install the driver for
each card that was detected on bootup.
To upgrade drivers for installed devices, install the new driver package.
This will update the files in the installation directory and then update all
installed SX type devices with the drivers found in this package.
Note: When new hardware is added Windows will try to find a driver for it. If a
driver is not found for the new device, you are able to give the location of the
driver you wish to use to the Found New Hardware Wizard. However if Windows
does find a driver for the device already on the system, Windows will
automatically install the most recent digitally signed driver it can find for
your new hardware. If you wish to install a different driver (i.e. a more
recent but unsigned driver) from the one installed for your device you will need
to use UPDATE.EXE in the installation directory to update the devices.
--------------------------------------------------------------------------------
Known issues in this release :
------------------------------
* None
Driver Updates :
----------------
These drivers will be updated from time-to-time. Please visit the Perle
Web-Site at http://www.Perle.com/ to ensure you have the latest release.
================================================================================
Release History
---------------
Version Description
------- -----------
2.0.0 * Added support for Window XP 64-bit version and
Windows 2003 Server 64-bit version. These OSes are supported on
both the x64 and itanium (ia64) hardware platforms.
* Added support for Windows Vista in both the 32-bit and 64-bit
versions.
1.1.0 1st approved release including support for SX+ PCI Adapters
1.1.0 BETA I Incorporate support for SX+ PCI Adapters
1.0.0 Initial release on Windows 2000 CD.
--------------------------------------------------------------------------------
******************************************
****** END README ******
******************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.