; SX.INF ; ; Copyright (c) 2007 Perle Systems Limited ; [version] Signature = "$Windows NT$" Class = MultiPortSerial ClassGUID = {50906CB8-BA12-11D1-BF5D-0000F805F530} Provider = %Perle_Systems% CatalogFile.ntamd64 = Sx.cat ;------------------------------------------------------------------------ ; Driver Package Version Information ; ; DriverVer = mm/dd/yyyy, [a.b.c.d] ;------------------------------------------------------------------------ DriverVer = 06/14/2007, 2.0.0.0007 ;******************************************************************************************* ; Control Flags ;******************************************************************************************* [ControlFlags] ExcludeFromSelect = PCI\VEN_11CB&DEV_2000&SUBSYS_030011CB, \ PCI\VEN_11CB&DEV_2000&SUBSYS_020011CB ;******************************************************************************************* ; Manufacturer ;******************************************************************************************* [Manufacturer] %Perle_Systems% = Perle,NTamd64 ;******************************************************************************************* ; Perle Multi-port Adapters ;******************************************************************************************* [Perle.NTamd64] ; DisplayName Section DeviceID ; ----------- ------- -------- ; SX+ %SXPLUS_PCI.DeviceDesc% = SXPLUS_PCI, PCI\VEN_11CB&DEV_2000&SUBSYS_030011CB ; SX %SX_PCI.DeviceDesc% = SX_PCI, PCI\VEN_11CB&DEV_2000&SUBSYS_020011CB %SX_ISA.DeviceDesc% = SX_ISA, SPX_SX001 ; SI/XIO %SIXIO_ISA.DeviceDesc% = SIXIO_ISA, SPX_SIXIO001 ;******************************************************************************************* ; Perle SX Multi-port Adapters ;******************************************************************************************* ;------------------------------------------------------------------------------------------- ; SX (SI/XIO) ; [SXPLUS_PCI.nt] CopyFiles = SX.CopyFiles, SX_DLL.CopyFiles AddReg = SX_DLL.AddReg CopyINF = %PortsINF% [SXPLUS_PCI.nt.HW] AddReg = SXPLUS_PCI.HW.AddReg [SXPLUS_PCI.nt.Services] AddService = %SX.ServiceName%, 0x00000002, SX.Service, SX.EventLog [SX_PCI.nt] CopyFiles = SX.CopyFiles, SX_DLL.CopyFiles AddReg = SX_DLL.AddReg CopyINF = %PortsINF% [SX_PCI.nt.HW] AddReg = SX_PCI.HW.AddReg [SX_PCI.nt.Services] AddService = %SX.ServiceName%, 0x00000002, SX.Service, SX.EventLog [SX_ISA.nt] CopyFiles = SX.CopyFiles, SX_DLL.CopyFiles AddReg = SX_DLL.AddReg CopyINF = %PortsINF% LogConfig = SX_ISA.LogConfig [SX_ISA.nt.HW] AddReg = SX_ISA.HW.AddReg [SX_ISA.nt.Services] AddService = %SX.ServiceName%, 0x00000002, SX.Service, SX.EventLog [SX_ISA.nt.FactDef] ConfigPriority = HARDRECONFIG MemConfig = D0000-D7FFF [SIXIO_ISA.nt] CopyFiles = SX.CopyFiles, SX_DLL.CopyFiles AddReg = SX_DLL.AddReg CopyINF = %PortsINF% LogConfig = SX_ISA.LogConfig [SIXIO_ISA.nt.HW] AddReg = SIXIO_ISA.HW.AddReg [SIXIO_ISA.nt.Services] AddService = %SX.ServiceName%, 0x00000002, SX.Service, SX.EventLog [SIXIO_ISA.nt.FactDef] ConfigPriority = HARDRECONFIG MemConfig = D0000-D7FFF ;******************************************************************************************* ; Services ;******************************************************************************************* ;------------------------------------------------------------------------------------------- ; SX ; [SX.Service] DisplayName = %SX.Service.DispName% ServiceType = 0x00000001 ; = SERVICE_KERNEL_DRIVER StartType = 0x3 ; = SERVICE_DEMAND_START ErrorControl = 0x1 ; = SERVICE_ERROR_NORMAL ServiceBinary = %12%\sx.sys LoadOrderGroup = Extended Base [SX.EventLog] AddReg = SX.AddEventLog.Reg [SX.AddEventLog.Reg] HKR,, EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\sx.sys" HKR,, TypesSupported, 0x00010001, 7 ;******************************************************************************************* ; Log Config section ;******************************************************************************************* [SX_ISA.LogConfig] ConfigPriority = HARDRECONFIG ; Need to change a jumper to change Mem Addr. MemConfig = 8000@00000000-00FF8000%FFFF8000 ;******************************************************************************************* ; Add Reg section ;******************************************************************************************* ;------------------------------------------------------------------------------------------- ; SX+, SX, SI/XIO ; [SX_DLL.AddReg] HKLM,SOFTWARE\Perle\DeviceMan\SXPorts,PATH,,SXPorts.DLL [SXPLUS_PCI.HW.AddReg] HKR,,UINumberDescFormat,,%SXPLUS_PCI_UINumDesc% [SX_PCI.HW.AddReg] HKR,,UINumberDescFormat,,%SX_PCI_UINumDesc% [SX_ISA.HW.AddReg] HKR,,UINumberDescFormat,,%SX_ISA_UINumDesc% [SIXIO_ISA.HW.AddReg] HKR,,UINumberDescFormat,,%SIXIO_ISA_UINumDesc% ;******************************************************************************************* ; Destination Directories ; 11: System directory. This is %windir%\system32 on Windows NT and %windir%\system on Windows 95. ; 12: Drivers directory. This is %windir%\system32\drivers on Windows NT. ; 17: INF file directory. ;******************************************************************************************* [DestinationDirs] DefaultDestDir = 12 SX.CopyFiles = 12 SX_DLL.CopyFiles = 11 ;******************************************************************************************* ; Copy Files Section ;******************************************************************************************* [SX.CopyFiles] sx.sys,,,2 ; COPYFLG_NOSKIP [SX_DLL.CopyFiles] SxPorts.dll,,,2 ; COPYFLG_NOSKIP ;******************************************************************************************* ; Source Disks ; ; diskid = description[, [tagfile] [, <unused>, subdir]] ; filename_on_source = diskID[, [subdir][, size]] ; ;******************************************************************************************* [SourceDisksNames] 1 = %DiskDescription%,,, [SourceDisksFiles] SX.sys = 1,, ; on distribution Disk 1 SxPorts.dll = 1,, ; on distribution Disk 1 ;******************************************************************************************* ; Strings ;******************************************************************************************* [Strings] Perle_Systems = "Perle Systems Ltd." DiskDescription = "Perle Driver Disk or CDROM" SXPLUS_PCI.DeviceDesc = "Perle SX+ PCI Adapter" SXPLUS_PCI_UINumDesc = "Port %1!u! on SX+ PCI Adapter" SX_PCI.DeviceDesc = "Perle SX PCI Adapter" SX_PCI_UINumDesc = "Port %1!u! on SX PCI Adapter" SX_ISA.DeviceDesc = "Perle SX ISA Adapter" SX_ISA_UINumDesc = "Port %1!u! on SX ISA Adapter" SIXIO_ISA.DeviceDesc = "Perle SI/XIO ISA Adapter" SIXIO_ISA_UINumDesc = "Port %1!u! on SI/XIO ISA Adapter" SX.ServiceName = "SX" SX.Service.DispName = "Perle SX Multi-port Serial Driver" PortsINF = "SXPORTS.INF"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.