tiumflt.inf Driver File Contents (TI1620.zip)

;Copyright (c) 2002 Texas Instruments All rights Reserved
;Module Name:
;    tiumflt.inf
;    INF file for installing PCMCIA CardBus device driver as filter driver
Signature="$WINDOWS NT$"


DefaultDestDir = 12

; PCMCIA Device Filter Install Section


; DisplayName       		Section           DeviceId
; -----------       		-------           --------
;;;%PCMCIAFilter.DeviceDesc%=PCMCIAFilter,   PCI\CC_0607            ; Generic CardBus Controller
%PCMCIAFilter.DeviceDesc_7510%=PCMCIAFilter,   PCI\VEN_104C&DEV_AC47  ; PCI7510 fn 0 CB
%PCMCIAFilter.DeviceDesc_7610%=PCMCIAFilter,   PCI\VEN_104C&DEV_AC48  ; PCI7610 fn 0 CB
%PCMCIAFilter.DeviceDesc_7410%=PCMCIAFilter,   PCI\VEN_104C&DEV_AC49  ; PCI7410 fn 0 CB
%PCMCIAFilter.DeviceDesc_1620%=PCMCIAFilter,   PCI\VEN_104C&DEV_AC54  ; PCI1620
%PCMCIAFilter.DeviceDesc_SC%=PCMCIAFilter,     PCI\VEN_104C&DEV_AC4A  ; PCI7510/7610 fn 1 SC
%PCMCIAFilter.DeviceDesc_FM%=PCMCIAFilter,     PCI\VEN_104C&DEV_AC4B  ; PCI7610/7410 fn 1 SD/MMC
%PCMCIAFilter.DeviceDesc_FM%=PCMCIAFilter,     PCI\VEN_104C&DEV_AC4C  ; PCI7610/7410 fn 1 MS

;=============== Get the standard stuff from PCMCIA.inf==============


; Add registry entries here

;================ Add our own stuff for the filter
AddReg = PCMCIAFilter.NT.HW.AddReg

;================ Add in the standard stuff provided by PCMCIA
Include = PCMCIA.inf
Needs = CARDBUS.HW,TICompat.HW


; PCMCIA Device Filter Service Section

AddService = DevUpper,, filter_Service_Inst 
;AddService = DevLower,, filter_Service_Inst 

;=========== This will add PCMCIA as the service and make sure =====
;=========== that pcmcia.sys has been installed ====================

DisplayName    = %filter.SvcDesc%                            
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\tiumflt.sys                            

; Source file information

1 = %DiskId1%,,,""

tiumflt.sys  = 1,,

TI = "Texas Instruments"
DiskId1 = "PCMCIA Filter Installation Disk #1"
PCMCIAFilter.DeviceDesc_7410 = "Texas Instruments PCI7410 CardBus Controller"
PCMCIAFilter.DeviceDesc_7510 = "Texas Instruments PCI7510 CardBus Controller"
PCMCIAFilter.DeviceDesc_7610 = "Texas Instruments PCI7610 CardBus Controller"
PCMCIAFilter.DeviceDesc_FM = "Texas Instruments CardBus Controller with FlashMedia"
PCMCIAFilter.DeviceDesc_1620 = "Texas Instruments PCI-1620 CardBus Controller with UltraMedia."
PCMCIAFilter.DeviceDesc_SC = "Texas Instruments CardBus Controller with SmartCard"
filter.SvcDesc = "TI UltraMedia CardBus Controller Filter Driver"

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.71