© 2006 Logitech. All Rights Reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. Document Part Number: The following "FCC Compliance and Advisory Statement" apply in general to all Logitech devices, and specifically to the devices listed there: Logitech 2.4 GHz devices ( power 3 mW max) : Model names FCC ID Model names FCC ID M-RAB81 DZL201662 M-RAP81 DZL201828A M-RAN100 DZL201866 M-RBB93 JNZ201943 M-RBA97 DZL201945 M-RAY105 DZL201940 M-RBK93b JNZ201998 M-RBH113 DZL201966 M-RBL117 DZL201992 M-RBT105A JNZ212125 M-RBP123 DZL202163 M-RBQ124 DZL202311 M-RBR125 JNZ222167 M-RBU126 DZL202251 Y-RM42 DZL201658 Y-RZ42 DZL201658A Y-RN43 DZL201678 Y-RAA43 DZL201678A Y-RP20 DZL201661 Y-RAH72 DZL201974 Y-RAN77 JNZ222130 Y-RAY81 DZL202343 C-BM16A DZL201657 C-UJ16A DZL201657 C-BQ16A DZL201657A C-UW34 DZL201958 C-UX34 DZL201963 C-UV35 DZL201986 Logitech 27 MHz devices ( power 1 mW max): Model names FCC ID Model names FCC ID M-RY81 JNZ211596 M-RAJ89A JNZ201779 M-RAA88 DZL211647 M-RAK89B DZL201780 M-RAA89 DZL211646 M-RAJ88A JNZ201798 M-RAA93 DZL201705 M-RAJ89C JNZ201779 M-RAF95 JNZ201740 M-RAU95 JNZ201893 M-RR95 JNZ201721 M-RAG97 DZL201758 M-RAM99 DZL201843 M-RAA93a JNZ201759 M-RAT95A JNZ201892 M-RAS88A JNZ201895 M-RAK89D DZL201780 M-RAZ105 DZL201959 M-RBG112 JNZ211953 M-RBG114 JNZ202023 M-RBF111 JNZ201962 M-RBN114 JNZ212106 M-RBW112 JNZ202484 Y-RK56 JNZRK56587 Y-RQ53 DZL131139 Y-RK56A JNZRK56587 Y-RR53 DZL131836 Y-RQ57 JNZ201774 Y-RQ52 DZL131836 Y-RX43 DZL201824 Y-RR57 DZL131836 Y-RW42 DZL201801 Y-RR54 DZL131836M Y-RK49 JNZ201587 Y-RAJ56A JNZ201997 Y-RR71 JNZYRR71 Y-RR63 JNZ201968 Y-RAK73 DZL202065 Y-RAM74 DZL134041 Y-RAU7 JNZ202198 Y-RAR76 JNZ212336 Y-RAP78 JNZ212175 Y-RAS79 JNZ212336 Y-RAV80 DZL135446 R-RD8 JNZ201987 FCC Compliance and Advisory Statement. This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. © 2006 Logitech. Tous droits réservés. Logitech, le logo Logitech et les autres marques Logitech sont la propriété exclusive de Logitech et sont susceptibles d’être des marques déposées. Toutes les autres marques sont la propriété exclusive de leurs détenteurs respectifs. Logitech décline toute responsabilité en cas d'erreurs dans ce manuel. Les informations énoncées dans le présent document peuvent faire l’objet de modifications sans avis préalable. La "Déclaration FCC" suivante, s'applique à tous les produits Logitech en général et spécifiquement aux produits listés ci-dessous: Produits Logitech 2.4 GHz: ( puissance émise 3 mW max): Model names FCC ID Model names FCC ID M-RAB81 DZL201662 M-RAP81 DZL201828A M-RAN100 DZL201866 M-RBB93 JNZ201943 M-RBA97 DZL201945 M-RAY105 DZL201940 M-RBK93b JNZ201998 M-RBH113 DZL201966 M-RBL117 DZL201992 M-RBT105A JNZ212125 M-RBP123 DZL202163 M-RBQ124 DZL202311 M-RBR125 JNZ222167 M-RBU126 DZL202251 Y-RM42 DZL201658 Y-RZ42 DZL201658A Y-RN43 DZL201678 Y-RAA43 DZL201678A Y-RP20 DZL201661 Y-RAH72 DZL201974 Y-RAN77 JNZ222130 Y-RAY81 DZL202343 C-BM16A DZL201657 C-UJ16A DZL201657 C-BQ16A DZL201657A C-UW34 DZL201958 C-UX34 DZL201963 C-UV35 DZL201986 Produits Logitech 27 MHz ( puissance émise 1 mW max): Model names FCC ID Model names FCC ID M-RY81 JNZ211596 M-RAJ89A JNZ201779 M-RAA88 DZL211647 M-RAK89B DZL201780 M-RAA89 DZL211646 M-RAJ88A JNZ201798 M-RAA93 DZL201705 M-RAJ89C JNZ201779 M-RAF95 JNZ201740 M-RAU95 JNZ201893 M-RR95 JNZ201721 M-RAG97 DZL201758 M-RAM99 DZL201843 M-RAA93a JNZ201759 M-RAT95A JNZ201892 M-RAS88A JNZ201895 M-RAK89D DZL201780 M-RAZ105 DZL201959 M-RBG112 JNZ211953 M-RBG114 JNZ202023 M-RBF111 JNZ201962 M-RBN114 JNZ212106 M-RBW112 JNZ202484 Y-RK56 JNZRK56587 Y-RQ53 DZL131139 Y-RK56A JNZRK56587 Y-RR53 DZL131836 Y-RQ57 JNZ201774 Y-RQ52 DZL131836 Y-RX43 DZL201824 Y-RR57 DZL131836 Y-RW42 DZL201801 Y-RR54 DZL131836M Y-RK49 JNZ201587 Y-RAJ56A JNZ201997 Y-RR71 JNZYRR71 Y-RR63 JNZ201968 Y-RAK73 DZL202065 Y-RAM74 DZL134041 Y-RAU7 JNZ202198 Y-RAR76 JNZ212336 Y-RAP78 JNZ212175 Y-RAS79 JNZ212336 Y-RAV80 DZL135446 R-RD8 JNZ201987 Déclaration FCC. Cet équipement a été testé et déclaré conforme à la section 15 du règlement de la FCC. Son fonctionnement est soumis aux conditions suivantes: 1) l'équipement concerné ne doit pas causer d'interférences dangereuses, et 2) il doit accepter toute interférence reçue, y compris les interférences risquant d'engendrer un fonctionnement indésirable. Cet équipement a été testé et déclaré conforme aux limitations prévues dans le cadre de la catégorie B des appareils numériques défini par la section 15 du règlement de la FCC. Ces limitations sont stipulées aux fins de garantir une protection raisonnable contre les interférences gênantes en installation résidentielle. Cet équipement génère, utilise et diffuse des ondes radio, et s'il n'est pas installé ni utilisé en conformité avec les instructions dont il fait l'objet, peut causer des interférences gênantes avec les communications radio. Cependant, nous ne pouvons vous garantir qu'une interférence ne se produira pas dans une installation particulière. Si cet équipement produit des interférences graves lors de réceptions radio ou télévisées qui peuvent être détectées en allumant et en éteignant l'équipement, vous êtes invités à les supprimer de plusieurs manières: 1) Réorienter ou déplacer l'antenne de réception; 2) Augmenter la distance séparant l'équipement et le récepteur; 3) Connecter l'équipement à un circuit différent de celui auquel le récepteur est connecté; 4) Contacter votre revendeur ou un technicien radio/TV qualifié. Toutes modifications ou tous changements effectués sans l'accord exprès de la partie responsable de la conformité aux normes pourraient contraindre l'utilisateur à ne plus utiliser son équipement. Afin d'assurer la conformité avec les règlements FCC, les câbles d'interface blindés fournis avec le produit doivent être utilisés, ainsi que tout autres composants ou accessoires également spécifiés, lors de l'installation du produit.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.