W92HDX80.INI Driver File Contents (R302718.exe)

[Models]
HDAUDIO\FUNC_01&VEN_111D&DEV_76D1=this
Default=this
[DelRegKeys]
HKR\Settings=yes
HKLM\Software\IDT=yes
[CopyFiles.32]
stlang.dll = 0x25
idtsg.cpl = 0x25
AESTCtrl.cpl = 0x25
AESTFltr.exe = 0x25
[CopyFiles.64]
stlang64.dll = 0x25
idtsg64.cpl = 0x25
AESTCt64.cpl = 0x25
AESTFl64.exe = 0x25
[Apps]
[RegisterDlls.32]
STacAPI.dll
[RegisterDlls.64]
STaPI64x.dll
[StartServices.32]
stacsv.exe -r
[StartServices.64]
stacsv64.exe -r
[HKLM\Software\IDT\State\UI]
JackDeviceTypeA = dword:0x00000008
JackPresenceA = dword:0x00000001
JackVerifyA = dword:0x00000001
JackVerify11 = dword:0x00000001
[HKLM\Software\IDT\State\Shared]
ShowEventDialog = dword: 1
[HKLM\Software\IDT\Config\Shared]
Config_Oem      = dword: 2
PollingPeriod   = dword: 1000
RecordPriority = dword: 1
[HKLM\Software\IDT\Config\STacsv]
HwSpkCfg       = dword: 1
MicRetasking 	= dword: 0
[HKLM\Software\IDT\Config\SysTray.32]
ControlPanel    = "IDTSG.cpl"
HideTrayIcon   	= dword: 1
Automatic      	= dword: 0
[HKLM\Software\IDT\Config\SysTray.64]
ControlPanel    = "IDTSG64.cpl"
HideTrayIcon   	= dword: 1
Automatic      	= dword: 0
[HKLM\SOFTWARE\IDT\Config\UI]
Config_Tab                           = dword: 0xA
Config_Adv                           = dword: 0x800001 
Config_Pwr                           = dword: 0x9
Config_Spk                           = dword: 0x30
[HKLM\Software\IDT\State\UI]
Config_DefPage 	= "PORTMAP"
Config_Update		=dword:0x00000001
[HKLM\SOFTWARE\IDT\Config\EventExpressions]
Version=dword:1
[HKLM\SOFTWARE\IDT\Config\EventExpressions\JackPresenseb]
110="if(JackState(11) == 1 || JackState(15) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))"
120="if(JackState(11) == 1 || JackState(15) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))"
[HKR]
CodecName = "92HD87"
[HKR\Settings]
InitVerbs						= hex: 01,88,17,00			
TraceFlags						= dword: 0x89B3
CPL_SaveExtraPower				= hex: 1
CPL_MaySwitchExtAmpPowerState	= hex: 1
EnablePcBeepAtCd  				= hex: 0
Biostype1 						= hex: 1
CPL_SecondsAfter 				= dword: 30
ShareSystemMicJackAsLine = hex: 1
AfgPowerStatePolicy 			= hex: 2
CPL_ControlAfgPowerState 		= hex: 0x1
KeepAnalogLoopbackAlwaysOn = hex: 0
DelayInMsAfterPortDisabling 	= dword: 0x40
PlaybackCaptureAssociations		= hex: 11
SAEN = dword: 0x08
RenderPathOptimization = hex: 1
EnableExtraD3PowerSaving = hex: 0
AfgPwrSeqDelayMs = dword: 16
AfgPwrSeqDelay2Ms = dword: 16
AntiPopGpoDelayInMsS3           = dword: 2000
AntiPopGpoDelayInMsS4           = dword: 2000
EnableDLCDWA                    = hex: 1
PmEnabledWidget				= hex: 0C,0E,0F
CodecAccessAttempts 			= dword: 0x000003E8
AEMicSource = dword: 0x2
BtlPort = hex: 0xd 
KeepPCBeepAlwaysOn = hex: 0
BtlForEq = dword: 0x000c7ae1		
IgnoreBiosBoost  = hex: 1			
[HKR\Settings\TopoNames]
PlaybackCapture = "{88C02F6A-D1E7-4fe3-A506-9E0AE51D1234}"
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
[HKR\Settings\Pin\0B]
CfgDflt = dword: 0x0421101F
Action = hex: 80,00,87,00
[HKR\Settings\Pin\0C]
CfgDflt = dword: 0x400000F1
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x90170110
[HKR\Settings\Pin\0E]
CfgDflt = dword: 0x400000F2
[HKR\Settings\Pin\0F]
CfgDflt = dword: 0x400000F2
[HKR\Settings\Pin\11]
[HKR\Settings\GPIO]
MAEOpts = dword: 0x10
[HKR\Settings\Connselector]
[HKR\Settings\filter\rear]
UniqueID                             = hex: 0
LegacyIoctlHere                      = hex: 1
Associations              			= hex: 1,2,6
DigitalVolumeControl                = hex: 0
DisableMicBoost                      = hex: 0
EnableSetFormatSupport              = hex: 1
EnabledPcmRenderBitsAndRates 		= dword: 0xFFFFFFFE
KeepAdcAlwayson                     = hex: 1
EnabledNonPcmBitsAndRates           = dword: 0x20040
ZeroPcmBitsAndRates                 = dword: 0x20040
DisableNonPcmPin                    = hex: 0
EnableVendorPcBeep                  = hex: 1
EnabledPcmCaptureBitsAndRates       = dword: 0x0A0060
MicInRecVolume                      = dword: 0x108000
DisableLine2InFromRender = hex: 1
DisableMicInFromRender = hex: 1
DisableMic2InFromRender = hex: 1
EnableIntSpkrMute			= hex: 1
DisableLineInFromRender = hex: 1
DisableLine2InFromCapture = hex: 1
MixInRecVolume = dword: 0xfffffac9
MicBoost  = hex: 0			
[HKR\Settings\filter\Rear\TopoNames]
MicIn                     = "{22B47F55-476C-4a44-9811-CFD743125BC2}"
Mic2In                     = "{9C56BB03-C758-4e8b-A23A-752D5968EA2D}"
MixIn   		  = "{88C02F6A-D1E7-4fe3-A506-9E0AE51D1234}"
[HKR\Settings\filter\Rear\plugins]
RegVersion                           = dword: 1
[HKR\settings\filter\rear\plugins\render\SpeakerMgr]
load = dword: 1
idEffect = dword: 32
order = dword: 1175
[HKLM\SOFTWARE\IDT\Config\UI\Layout]
[HKLM\SOFTWARE\IDT\Config\UI\Layout\Panel[0]]
Location="right"
Size="1x2"
[HKLM\SOFTWARE\IDT\Config\UI\Layout\Schema[0]]
Desc="IDS_CONFIG_OPEN"
[HKLM\SOFTWARE\IDT\Config\UI\Layout\Schema[0]\Jack[0]]
Panel=dword:0
Color="black"
Port=dword:0xA
Row=dword:0
Col=dword:0
Dev[0]="mic"
Dev[1]="linein"
[HKLM\SOFTWARE\IDT\Config\UI\Layout\Schema[0]\Jack[1]]
Panel=dword:0
Color="black"
Port=dword:0xB
Row=dword:0
Col=dword:1
Dev[0]="HP"
[HKLM\Software\Microsoft\Windows\CurrentVersion\App Paths\AESFltr.exe]
(Default) = "c:\windows\system32"
Path = "%systemroot%\system32"
[HKLM\Software\Microsoft\Windows\CurrentVersion\App Paths\AESFl64.exe]
(Default) = "c:\windows\system32"
Path = "%systemroot%\system32"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.09