Focus Enhancements FS-2E 2.0.2 update README file RELEASE NOTES: version 2.0.2.01120506: - WARNING!! A factory reset will occur when upgrading to this version. - Correctly support drop/non drop flag in EXT TC mode (LTC, VITC, and DV) - Support VITC on the Y/C and Component inputs - Simplified EXT TC menu to only provide "SELECTED SOURCE" and "LTC" as options. - Enabled genlock for record and EE modes - Fixed the occasional long boot time lasting a minimum of 2 minutes - Improved Headphone Volume control - Renamed the REF VIDEO menu to GENLOCK - Moved the H and SC phase adjustments into the GENLOCK Menu - Corrected occasional OSD issue - Corrected cropped IP Address on LCD - The Y,U,V video adjustments are available only while COMPONENT out is selected - Changed the Welcome message to display FS-2E and remove FIRESTORE. - Corrected RS422 device id in PAL - Adjusted the video levels - Correctly handle booting with uninitialized or no disk - Added new menus for Adjusting Y, U, V while in PAL mode or CMPST mode. - Added Y, U, V adjustments to the web interface - Added HDD Bypass to Web Interface - All partitions on the local disk will be displayed first in the track list. - Modified the behavior of the progress bar. INSTRUCTIONS: IN ORDER TO INSTALL THIS SOFTWARE UPDATE, YOU WILL REQUIRE THE FOLLOWING: 1) Windows 98SE, ME, 2000, XP or Macintosh OS 9.1 or later computer system with an active OHCI compliant FireWire (IEEE-1394) port. 2) Focus Enhancements FS-2E DTE Recorder 3) 6-pin to 6-pin FireWire (IEEE-1394) connector (or 6 pin to 4 pin depending on your set up). To update system software: Step 1: Using a FireWire cable connect the host computer to FS-2E's using the "To Computer" port. Step 2: Press the HDD button on front panel of FS-2E, the FS-2E should appear on the host computer's desktop. Step 3: From the host computer, copy the fs2.bin file to the FS-2E HDD. Tesp 4: Unmount the FS-2E HDD from the host computer. Step 5: Press EXIT, the LEFT soft key, from the FS-2E menu. Step 6: From the FS-2E menu select SETUP followed by the OS UPGRADE. Step 7: The LCD will display "Upgrade sytem firmware?". Select YES, the middle soft key. Step 8: A confirmation screen will display: "UPGRADE WILL ERASE CURRENT OS!! CONTINUE?". Select YES, the middle soft key. A status screen will display the progress of the update. Step 9: Upon successful completion of the update, the FS-2E displays the message: UPGRADE COMPLETE Step 10: Power down the FS-2E from the front rocker power switch. Step 11: Power up the FS-2E. See the FS-2E User Guide page 55 (OS Upgrade) for more details . This manual is available for download at www.focusinfo.com. If you experience trouble with this Firmware update, please, contact Focus Enhancements Technical Support: USA: Office Hours: Monday through Friday 8:00 AM to 5:00PM (Central Time) Email: support@focusinfo.com Telephone: 763-398-1658 Fax: 763-571-7688 Address: Focus Enhancements, Inc. 1370 Dell Avenue Campbell, CA. 95008 www.focusinfo.com EMEA: Email: techsupport@como.com Telephone: +49 4307 - 83 58 58 Fax: +49 4307 - 83 58 99 Address: COMO Computer & Motion GmbHA A Focus Enhancements Company Lise-Meitner-Str. 15 24223 Raisdorf / Germany www.focusinfo.comDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.