Focus Enhancements DR-HD100 2.2.0 update README file RELEASE NOTES: version 2.2.0.04022107: - Resolved HDV QUICKTIME incompatibilty 720/30p, 24P, and 25P streams from the JVC GY-HD200/250 cameras. - Fixed JVC 720/60p and 720/50p display issues. - Improved HDV QUICKTIME 720/24P file indexing. Note: 720/24P files recorded using version 2.1.0 will not playback in the 2.2.0 version firmware. - Fix for rare audio noise at 20 minute intervals in 720/24P mode. - On an empty unit, the TC SET value is used as start value in TC REGEN mode. version 2.1.0.04112206: - Supports 720p24, 720p25, 720p30, 1080i/50 and 1080i/60 streams for the QT-HDV format. - Fixed file boundary QT-DV 24P (2 frames of green) - DV SNAP record issue corrected - Fixed intermittent playback glitch at file boundaries. - Removed FC DV/HD from FUNCTION menu - Fix time code rollover at 24 hours. version 2.0.0.04081406: - Native QuickTime HDV DTE format. - HD TC display and restripe capabilities in Native QuickTime HDV DTE format - MXF OPatom DV DTE format. - Added ORGANIZE MXF for MXF OPatom support. - Added HDV TC TYPE menu functionality for HDV TC playback. - Added front panel unlock confirmation screen. - Improved DV FORMAT QUICKTIME 24P compatibilty. - Improved disk handling. - Added search playback functionality in HD RECORDER mode. - Improved HD playback functionality. - Handle 999 clip limit properly. INSTRUCTIONS: IN ORDER TO INSTALL THIS SOFTWARE UPDATE, YOU WILL REQUIRE THE FOLLOWING: 1) Windows 98SE, ME, 2000, XP or Macintosh OS 9.1 or later computer system with an active OHCI compliant FireWire (IEEE-1394) port. 2) Focus Enhancements DR-HD100 Portable DTE Recorder 3) 6-pin to 6-pin FireWire (IEEE-1394) connector (or 6 pin to 4 pin depending on your set up). To update system software: Step 1: Set the DR-HD100 to DD DRIVE in the HDD MODE menu and connect it to a computer. Step 2: Copy or drag the dr-hd.bin file to the DR-HD100 while it is in DD DRIVE mode. Step 3: Exit the DR-HD100 from DD DRIVE mode and navigate to the Utilities screen. Step 4: From the Utilities screen, go to Upgrade. Step 5: Press Right. The update screen is displayed. Step 6: Press Select. Step 7: A confirmation screen appears: press YES to continue. A status screen will display the progress of the upgrade. Step 8: Upon successful completion of the update, the DR-HD100 displays the message: UPGRADE COMPLETE Step 9: Hold down the STOP / POWER OFF button until the DR-HD100 shuts down. Step 10: Power up the DR-HD100. See the DR-HD100 User Guide for more details. This manual is available for download at www.focusinfo.com. If you experience trouble with this Firmware upgrade, please, contact Focus Enhancements Technical Support: USA: Office Hours: Monday through Friday 8:00 AM to 5:00PM (Central Time) Email: support@focusinfo.com Telephone: 763-398-1658 Fax: 763-571-7688 Address: Focus Enhancements, Inc. 1370 Dell Avenue Campbell, CA. 95008 www.focusinfo.com EMEA: Email: techsupport@como.com Telephone: +49 4307 - 83 58 58 Fax: +49 4307 - 83 58 99 Address: COMO Computer & Motion GmbHA A Focus Enhancements Company Lise-Meitner-Str. 15 24223 Raisdorf / Germany www.focusinfo.comDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.