Focus Enhancements FS-100 4.0.1 upgrade README file RELEASE NOTES: version 4.0.1.04032008: - Corrected 16:9 PAL MXF file issue - Resolved playback error with P2 Viewer application - Added support for 250GB SATA drive - Resolved incorrect unit behavior below 0 degrees centigrade version 4.0.0.04080107: - Quicktime Reference Movie support to correct clip-spanning issue with FCP 5.1.2 - VFR compatibility resolved - Added VFR MODE to SETUP for VFR compatibility - Added MAKE REF MOV to UTILITIES for QT RM support - PN playback no longer MUTED - Resolved PN AVID incompatibilty issue - Switching from DVCPRO HD PN to DVCPRO now selects corresponding non-PN DTE FORMAT - UTILITIES->FILE NAME display now uses all capital letters - Improved upgrade error handling - QT DVCPRO 576/50 or 576/25 now supported correctly - Improved support for multiple partitions - Organize P2 auto XML generation now supports multiple segment clips version 3.0.0.04011507: - DVCPROHD and DVCPRO50 QUICKTIME DTE file format support - DVCPROHD QUICKTIME PN DTE file format support for 720P streams - PN (Native) DTE file format support for 720P 24/25/30 streams - Set Function A default to be TAPELESS - "AUDIO MUTE" displayed during 720 PN playback - Improved P2 Repair Clip (eliminates "orphaned" files) - Improved DVCPRO/DV 24P compatibility - P2 repair no longer leaves xml from previous names when repairing P2 organized files. - The "RAW DV" DV FORMAT option is moved to bottom of list. - Improved P2 Avid compatibility. version 2.0.3.04110906: - Improved disk performance - Improved SDRAM interface to increase production yield version 2.0.1.05102406: - Improved disk performance - Changed fan control algorithm - Corrected shut-down sequence when over temperature - XML now supports 16:9 in DVCPRO50 version 2.0.0.04080806: - Various disk performance improvements - Improvements for 24P support - Improved compatibilty with Final Cut Pro as an AVC device. - Handle audio recorded at end of clip properly - Changed the behavior of the organize p2 progress bar. Now it is similar to the OS upgrade progress bar. version 2.0.0.04061606: - Auto Stream Detect - The thumbnails displayed correctly from P2 Viewer and FCP - When in EXT TC mode, Non Drop is correctly detected - Added the unlock (UNLK) front panel confirmation screen - Support 999 clip limit properly - Various disk performance improvements - Enabled a timer to update TC/UB DISP screen every second - Fixed the thumbnail's aspect ratio for HD clips version 1.0.0.04061906: - Fixed Avid Import Clip issue when powering down between recordings. version 1.0.0.04052606: - Oxford Semiconductor 1394 Bridge chips configuration updated upon System Reset. INSTRUCTIONS: IN ORDER TO INSTALL THIS SOFTWARE UPGRADE, YOU WILL REQUIRE THE FOLLOWING: 1) Windows 98SE, ME, 2000, XP or Macintosh OS 9.1 or later computer system with an active OHCI compliant FireWire (IEEE-1394) port. 2) Focus Enhancements FS-100 Portable DTE Recorder 3) 6-pin to 6-pin FireWire (IEEE-1394) connector (or 6 pin to 4 pin depending on your set up). To upgrade system software: Step 1: Set the FS-100 to DD DRIVE in the HDD MODE menu and connect it to a computer. Step 2: Copy or drag the fs100.bin file to the FS-100 while it is in DD DRIVE mode. Step 3: Exit the FS-100 from DD DRIVE mode and navigate to the Utilities screen. Step 4: From the Utilities screen, go to Upgrade. Step 5: Press Right. The upgrade screen is displayed. Step 6: Press Select. Step 7: A confirmation screen appears: press YES to continue. A status screen will display the progress of the upgrade. Step 8: Up on successful completion of the upgrade, the FS-100 displays the message: UPGRADE COMPLETE Step 9: Hold down the STOP / POWER OFF button until the FS-100 shuts down. Step 10: Power up the FS-100. Step 11: From the UTILITIES menu select the SYSTEM RESET option. See page 72 of the FS-100 manual for more information. See page 86 of the FS-100 Manual for more details. If you experience trouble with this Firmware upgrade, please, contact Focus Enhancements Technical Support: USA: Office Hours: Monday through Friday 8:00 AM to 5:00PM (Central Time) Email: support@focusinfo.com Telephone: 763-398-1658 Fax: 763-571-7688 Address: Focus Enhancements, Inc. 1370 Dell Avenue Campbell, CA. 95008 www.focusinfo.com EMEA: Email: techsupport@como.com Telephone: +49 4307 - 83 58 58 Fax: +49 4307 - 83 58 99 Address: COMO Computer & Motion GmbH A Focus Enhancements Company Lise-Meitner-Str. 15 24223 Raisdorf / Germany www.focusinfo.comDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.