;;/*********************************************************************
;;
;; (c) Copyright MosChip Semiconductor Technology Limited
;;
;; MosChip 7840/7820 - MosChip High-Speed USB MultiSerial Device Driver for 2/4 serial ports
;;
;; Mos24Ser.inf: Installation Script for MosChip 7840/20 - Serial Port Device
;; Target OS : 64-Bit Windows Vista.
;;
;;*********************************************************************/
[version]
Signature="$WINDOWS NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%ProviderName%
DriverVer=06/24/2009,1.4.7.6
CatalogFile=Mos24Ser_QUADPORT.cat
[DestinationDirs]
DefaultDestDir = 11 ;LDID_SYS
CoClass.CoInstallers_CopyFiles=12 ;DIRID_DRIVERS
[SourceDisksNames]
2=%MosQuadPort.DiskName%,,,
[SourceDisksFiles]
;; NOTHING
;===============================
; Driver Installation
;===============================
[Manufacturer]
%MfgName%=MosQuadPortsList,NTamd64
;
; Manufacturer Name Section
;
[MosQuadPortsList.NTamd64]
%MosQuadPort.ComPortName%=ComPort.NT,QUADPORT\QUAD_SERIAL_INTERFACE
;----------------------------------------
; COM Port Install
;----------------------------------------
[ComPort.NT]
AddReg=ComPort.NT.AddReg
[ComPort.NT.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,mos24ser_QUADPORT.sys
;RegMaxTxPacketSize is valid 32 - 512K
HKR,, "RegMaxTxPacketSize", 0x10001, 512
;RegMaxTxPacketSize is valid 64 - 512K
HKR,, "RegMaxRxPacketSize", 0x10001, 1024
;RegUsbReadMaxPolls is valid 1 - 10
HKR,, "RegUsbReadMaxPolls", 0x10001, 1
;RegUsbStatusMaxPolls is valid 1 - 10
HKR,, "RegUsbStatusMaxPolls", 0x10001, 1
;RegEnableHwFlowControl is valid 0 - 1
HKR,, "RegEnableHwFlowControl", 0x10001, 0
HKR,, "DeviceControlReg0", 0x10001, 01
HKR,, "DeviceControlReg1", 0x10001, 05
HKR,, "DeviceControlReg2", 0x10001, 36
HKR,, "MaskBaudsLowToHigh", 0x10001, 0
HKR,, "WriteDCR", 0x10001, 1
HKR,, "ControlReg", 0x10001, 0
HKR,, "RS485EN", 0x10001, 0
HKR,, "IrDA", 0x10001, 0
HKR,, "DLL" , 0x10001, 0
HKR,, "DLM" , 0x10001, 0
HKR,, "DivisorValueToSync1200baud", 0x10001, 0x5f
HKR,, "CLK_SEL_REG", 0x10001, 0
HKR,, "RxSAMP", 0x10001, 7
HKR,, "ZLP", 0x10001, 255
HKR,, "ZLP_ENABLE", 0x10001, 1
HKR,, "THR1", 0x10001, 0
HKR,, "THR2", 0x10001, 1
HKR,, "ICG", 0x10001, 0
HKR,, "EN450MODE", 0x10001, 0
HKR,, "CUSTNAME", , %CUSTNAME%
HKR,, "VID_PID_CUSTOMER", , "9710_7840_QUADPORT"
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
HKR,,EnumPropPages32,,"Mos24SerPropPage_QUADPORT.dll,MosUSBSerPropPageProvider"
HKR,,PortSubClass,1,01
[ComPort.NT.HW]
AddReg=ComPort.NT.HW.AddReg
;[ComPort.NT.Service.AddReg]
;DebugLevel is valid 0 - 3
;HKR,"Parameters", "DebugLevel", 0x10001, 0
;HKR,"Parameters", "EXT_INTERRUPT_VAR", 0x10001, 0
;HKR,"Parameters", "WaitCount", 0x10001, 0
;HKR,"Parameters", "ClockStartReg", 0x10001, 0
;HKR,"Parameters", "ClockMultiReg", 0x10001, 16
;HKR,"Parameters", "PLL_N_REGs", 0x10001, 8
;HKR,"Parameters", "PLL_M_REGs", 0x10001, 1
;HKR,"Parameters", "CLK_MUX_REGs", 0x10001, 0
;HKR,"Parameters", "EXTERNAL_CLOCK", 0x00010000 , "12.0"
;HKR,"Parameters", "SafeRemovalIcon", 0x10001, 1
[ComPort.NT.HW.AddReg]
HKR,,"UpperFilters",0x00010000,"serenum"
HKR,,"VID_PID_CUSTOMER", , "9710_7840_QUADPORT"
[ComPort.NT.Services]
AddService=mos24ser_QUADPORT,2,ComPort.NT.AddService,USBSER_Event_Log_AddService
AddService= Serenum,,Serenum_Service_Inst
[ComPort.NT.CoInstallers]
CopyFiles=CoClass.CoInstallers_CopyFiles
AddReg = CoClass.CoInstallers_AddReg
[CoClass.CoInstallers_AddReg]
HKR,,CoInstallers32,0x00010000,"QuadCoInst.dll,CoInstaller"
[CoClass.CoInstallers_CopyFiles]
;; NOTHING TO COPY
[ComPort.NT.AddService]
DisplayName = %CUSTNAME%%mos24ser.ServiceName%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 0 ; SERVICE_ERROR_IGNORE
ServiceBinary = %12%\mos24ser_QUADPORT.sys
;LoadOrderGroup = Base
;AddReg=ComPort.NT.Service.AddReg
; -------------- Serenum Driver install section
[Serenum_Service_Inst]
DisplayName = %Serenum.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\serenum.sys
LoadOrderGroup = PNP Filter
; -------------- USBSER Event Viewer Log Section
[USBSER_Event_Log_AddService]
AddReg = USBSER_Event_Log_AddReg
[USBSER_Event_Log_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\mos24ser_QUADPORT.sys"
HKR,,TypesSupported,0x00010001,7
;----------------------------------------------
; User readable strings
;----------------------------------------------
[Strings]
ProviderName="MosChip Semiconductor Technology Ltd."
MfgName="MosChip Semiconductor Technology Ltd."
DiskName="High-Speed USB MultiSerial Compound Device Installation Disc"
MosQuadComp.DevName="High-Speed USB MultiSerial Compound Device"
mos24ser.ServiceName=" High-Speed USB MultiSerial Device Service"
PortsClassName = "Ports (COM)"
MosQuadPort.ComPortName="High-Speed USB Serial Port"
Serenum.SVCDESC = "Serenum Filter Driver"
Enumerator = "Serial Enumerator"
MosQuadPort.DiskName = "Install disk"
CUSTNAME = "QUADPORT"
VID = "9710"
PID = "7840"
;-----------------------
; END OF FILE
;-----------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.