Firmware Date : May 27, 2002
Current Firmware : Version 1.42.7
Product PartNo : BEFN2PS4
Ver #. Date Description
--------------------------------------------------------------------------------
1.42.7 May 27,02 1. Disabled Net2Phone voice function if error occurs with the Account number
and Password.
2. Fixed SNMP Vulnerability problem sent through the WAN port
3. User can disable to login Linksys Net2phone Server
4. Support MSN Messenger 4.5:
A. Make a phone call,
B. The lengths of router's WAN and Lan IPs are different
5. Fixed tracert under NAT mode problem
6. Fixed the problem where the DHCP Discovery request is sent when
the lease time expires.
7. Fixed DHCP not sending a request when lease time expires.
8. Router can support PCs with small MTU settings to configure the router
9. Supports Applying settings without rebooting (Password, DHCP,
MAC Filter, Forwarding, DMZ, MAC Addr.Clone)
10. Added DNS and WINS setting in DHCP User Interface page.
11. Support for multi-IPSec pass-through
12. Fixed Nortel VPN pass-thru
13. Forced MTU enabled and size = 1492,when PPPoE is enabled
14. Added DHCP Lease time for LAN connections
15. Added PPTP client for European users.
16. Updated Web upgrade utility
17. New WAN connection setting Interface in the SETUP page.
18. Fixed DHCP server problem that assign one IP address to 2 PCs
19. Fixed ip filter problem when start ip is bigger then end ip
20. Fixed Log radio disappear when click Cancel button on Log UI page
21. Fixed some time user can see the UI page without password problem
22. Fixed PCC prompts "This version needs the special router" when installation
23. Change the aging time of AOL application (#5190) connection to 90 minutes.
24. Modify UI pages to fix the banner problem in Netscape 4.7, 6.0
1.39.1 Aug 13, 01 1. Support Fragmented packet pass through
2. Speed up throughput rate
3. Support MSN Messenger
4. Support VPN IKE
5. Modify PPPoE and RAS action include Setup and Status help UI
(Keep Alive will always try to keep the line alive)
6. Add SPI (Stateful Packet Inspection) function in Filter page
7. Deny WAN side DNS relay request
8. Fix DNS relay access trap (port 1200, 1400) problem
9. When using PPPoE login, shows WAN, Gateway and Subnet Mask in Status page
10. Add MTU(maximum transmission unit) function in "Filter" page
11. Modified Korea DHCP problem: if router does not has host name, send WAN
MAC as hostname to get IP
12. Add "Port Triggering" function in Forwarding page
13. Fix DNS relay under PPPoE problem
14. Fix DNS relay under DMZ setting problem
15. support multi-LAN-host using same port to connect to same server
16. Fix Forwarding LAN PPTP server problem
17. Fix DNS relay under PPPoE dial on demand disconnected problem
18. Change Forwarding LAN server IP range from 0~254 to 0~255
19. Add PPPoE and RAS keep alive redial period setting field in "Setup" page
20. Support space on Web UI input page
21. Support long dhcp lease time in WAN interface
22. Add "multicast pass through" option in Filter UI page
23. Modified Max MTU setting value of PPPoE from 1446 to 1492.
24. Speed up throughput under PPPoE.
25. Support 3com ADSL modem.
26. Modified the access log message to import to Excel
27. Add the RAS function
28. Move Log page to first banner.
29. Add a “MAC Address Clone” page
30. Fixed NEWS server connection problem
31. Add a Note message in “Setup” page for PPPoE and RAS
32. Modified the HTTP module
33. Modified LCP_request time to avoid the timeout issue.
Timeout increased to 15 seconds.
34. RAS Plan: When choose 256k, it will show 256k even refresh.
35. RAS help is in the setup help.
36. More detail is in the RAS help.
37. Fixed Forwarding protocol problem.
38. Fixed lost connection of SSH problem.
39. Support multicast traffic - FTP downloads
40. Fixed system lock up when filter is set
41. Fixed press "Continue" can't go back to pre-setting page problem
42. Keep the DHCP Table when system reboots.
43. Change the size of incoming log table from 200 to 70.
44. Fixed Broadcast ping problem (response src IP is wrong)
45. Fixed Broadcast trap IP problem.
46. Fixed WIN CE DHCP problem (UDP checksum error)
47. Adjusted TFTP upgrade password length.
48. Add protocol selection in Forwarding page
49. Add protocol selection in Filter page
50. Add MAC Filter in Filter page(50 entries)
51. Resolved RAS Problem when DMZ is enabled.
52. Resolved Remote Management problem
53. Resolved Failed UI Link problem.
54. Improved echo cancelling
V2.36P7 March 2,01 Account balance notification
v1.36p3 Sept 22,00 First Release
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.