Purpose: These are utilities for using programs written for the older cards ME-81 with the new PCI cards ME-8100 General hints : For backwards compatibility, there are several different cases: 1. Only the ME8100 is being used and a new application is being written or the example program included are being used =>No restrictions apply 2. An ME-81 ISA board is currently installed and the ME-81 driver system is being used (including any old applications). A new ME-8100 is installed along with the ME-8100 driver system. =>No restrictions apply 3. The existing ME-81 ISA is to be replaced with an ME-8100 PCI board. The existing application for the ME-81 ISA will still be used for the ME-8100 board. =>Follow instructions below 4. An existing application for the ME-81 ISA board is to be used for the ISA board and the new PCI ME-8100 boards. This is not possible due to logical differences in the way the boards are controlled. With a few minor changes, the application for the ME-81 ISA board can be modified to suit the PCI ME-8100. 5. Software which has been programmed on the register level with fixed hardware addresses can not be used for the PCI boards without being modified. This is because the PCI Bios automatically assigns the addresses. Using requirements: This runs only with programs using the 32 bit driver system. DOS programs need a special modification. Not every DOS program can be adapted to the newer boards ME-8100, because the new boards use other IO ports. Limitations: If you use ME-81 ISA cards and ME-8100 PCI cards at the same time in one system you can not use the upward compatibility feature for the ME-8100. Then you have to use the standard driver for both card types. Instructions: 1.) copy the file me81_32.dll into the system directory Windows 9x: C:\WINDOWS\SYSTEM Windows NT: C:\WINNT\system32 2.) Now you can use the old program for ME-81 with the ME-8100 The programs are shipped as is and Meilhaus Electronic offers no guarantees.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.