Information file for firmware release V3.015/3.009 for SUNNY ISLAND 5048
General:
========
This firmware supports the device SUNNY ISLAND 5048.
The update is being done by copying the file "UPDATE.BIN" to an
SD/MMC-Card and inserting this card into the SD/MMC-card slot
of the SUNNY ISLAND 5048 MASTER UNIT, which is in STAND BY mode.
Slave devices which are connected to the Master unit via
communication do not have to be updated explicitly. The Master
unit is updating the Slave units automatically.
If a Slave unit has been updated accidentally while the Master
unit still has the older version of the software, this will be
detected by the Master unit and the Slave unit will be set to
the version of the Master unit automatically.
CAUTION: This firmware version is for SUNNY ISLAND 5048 only and
not for other devices of the SUNNY ISLAND family. By updating the
firmware, no parameter which has been set in advance will be
deleted as long as this is not explicitly explained in this text
file.
For safety reasons the parameter list should be stored on the
SD/MMC-Card (please see manual: "Store and load parameters")
Changes to previous versions:
=============================
Firmware release V1.020/1.008
=============================
- The unwanted restart of the device after inserting the SD/MMC-Card
several times has been solved
- The emersion of a watchdog failure after a certain operating time
has been solved.
Firmware release V3.015/3.009
=============================
- Optimized menu structure: e.g. Password setting at #260 instead
of #280
- New Feature: Voltage enhancement protection
- Improved Anti-Islanding technique: Bugs from unwanted disconnections
have been eliminated
- Generator management: Improved connection to AC bus (reverse power
protection temporarily suppressed)
- Changed Settings: Date and time settings are only possible in
"stand by" mode
- Battery management: If the maximum permission temperature is
exceeded, the Sunny Island switches off. This upper limit is now
adjustable.
- The Sunny Boys' output power can now be controlled via the RS485
interface during main power grid operation
- New feature: Integrated voltage peak detection
- MMC/SD-Card: Changed data file structure
- MMC/SD-Card: Recording time 100 instead of 28 days
- Enhanced firmware updates
- Optimized short-circuit characteristics
- Optimized generator statistics
- No shut down after cable break of the battery temperature sensor
any longer
- New default values: - GnErrStpTm 1h (instead of 6h)
- Stop time after the generator is manually
started is set to 30 sec
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.