WNAP(b) update tool ------------------- Change fixed IP address for your PC network adapter (control panel->network connections->TCP/IP protocol) IP address = 192.168.1.101 Subnet mask = 255.255.255.0 Gateway = 192.168.1.254 Connect network cable from your PC to WNAP(b). First hold down the reset button and then turn power on. Wait few seconds and then you can release the reset button. Open file WNAPb_Update_Tool_V2.0.0.exe and press Start, Software will inform you when the update has been finished. After update, go to WNAP(b) management web pages and update the latest firmware which you can download from http://www.a-link.com/wnap/. After updates are done, you need to reset WNAP(b) to factory defaults from web management (management->save/reload settings->reset settings to default ). NOTE! Reset to factory defaults should not be done with reset button. At the end, change your PC network settings to get IP address automatically.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.