;*********************************************************************** ; ; OEMSETUP.INF ; ; AWLAN IEEE 802.11b Adapter for Windows NT .INF file ; ;*********************************************************************** ;----------------------------------------------------------------------- ; OPTION TYPE ; ----------- ; This identifies the Option type we are dealing with. The different ; possible types are: ; ; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ... ; ; Types specific to networking: ; ; NetAdapter, a netcard / adapter combination or just a netcard ; NetDriver, just a netcard driver ; NetTransport, a complete NDIS-compliant TDI transport stack ; NetService, an NT networking service ; NetWork, a complete network ensemble. ; NetProvider a complete network which supports NT MPR protocol ;----------------------------------------------------------------------- [Identification] OptionType = NetAdapter ;----------------------------------------------------------------------- ; PlatformsSupported ; ------------------ ; This identifies the platforms supported by the adapter card. ; Possible types are: ; ; ISA, EISA, MCA and PCMCIA ;----------------------------------------------------------------------- [PlatformsSupported] ISA ; EISA ; PCI PCMCIA ;----------------------------------------------------------------------- ; OPTION LIST ; ----------- ; This section lists the OEM Option key names. These keys are locale ; independent and used to represent the option in a locale independent ; manner. ; ;----------------------------------------------------------------------- [Options] AWLAN ;*********************************************************************** ; CONSTANTS FOR USING DIALOGS ;*********************************************************************** [FileConstants] ;GenericAdapterName = "AWLAN 11Mb IEEE 802.11b Adapter" GenericAdapterName = "IEEE 802.11b Wireless LAN Adapter (PCMCIA)" ;GenericDriverName = "AWLAN 11Mb IEEE 802.11b driver" GenericDriverName = "IEEE 802.11b Wireless LAN driver (PCMCIA)" GenericSysName = "ep3nds.sys" GenericName = "WS8" ; ; File names, etc. ; UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 ; ; EventLog Message File ; NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" ; ; Product Info ; Manufacturer = "AWLAN" ProductMajorVersion = "1" ProductMinorVersion = "00" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ; ; Software ; ProductSoftwareName = "WS8" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName) NetRuleSoftwareType = "ws8Sys ndisDriver ws8Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """ws8Sys"" yes no container" NetRuleSoftwareClass = {"ws8Driver basic"} NetRuleSoftwareBindable = {"ws8Driver ws8Adapter non exclusive 100"} ; ; Hardware ; ProductHardwareName = "WS8" NetRuleHardwareType = "ws8 ws8Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"ws8Adapter basic"} ; ; Registry Key ; ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" PcmciaDataBaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\Database" [GeneralConstants] ; ; Program flow control variables. ; from = "" to = "" ; ; Return codes; Exit_Code is set to one of these ; ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour, ; Minute, Second } Now = {} ? $(!LIBHANDLE) GetSystemDate ;--------------------------------------------------------------------------- ; 1. Identify ; ; DESCRIPTION: To verify that this INF deals with the same type of options ; as we are choosing currently. ; ; INPUT: None ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette description ;--------------------------------------------------------------------------- [Identify] ; ; read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------ ; 2. ReturnOptions: ; ; DESCRIPTION: To return the option list supported by this INF and the ; localised text list representing the options. ; ; ; INPUT: $($0): Language used. ( ENG | FRN | ... ) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE ; STATUS_FAILED ; STATUS_NOTSUPPORTED ; ; $($R1): Option List ; $($R2): Option Text List ;------------------------------------------------------------------------ [ReturnOptions] ; ; set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ; ; Check if the platforms requested is supported ; ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; ; form a list of all the options and another of the text representing ; returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------ ; ; InstallOption: ; ; This section is shelled to by main installation processing ; or by NCPASHEL.INF during reconfig, removal, update, etc. ; ; ; FUNCTION: To copy files representing Options ; To configure the installed option ; To update the registry for the installed option ; ; INPUT: $($0): Language to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy (YES | NO) ; $($4): DoCopy (YES | NO) ; $($5): DoConfig (YES | NO) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED ; ;------------------------------------------------------------------------ [InstallOption] ; ; Set default values for ; set Status = STATUS_FAILED ; ; extract parameters ; set Option = $($1) ;----read from install ifstr(i) $(!NTN_Infoption) != "" set Option = $(!NTN_Infoption) endif ;---- set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) Set !DebugOutputControl = 0 ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin ; ; Assume all is well. ; set CommonStatus = STATUS_SUCCESSFUL EndWait ; ; Set up the operation-mode-based variables and gaily welcome ; the user. If the "install mode" variable is improperly set, ; assume this is a new installation. ; Begin = + Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure ; set ActivateDetection = TRUE set StartLabel = configureadapter ; ; You cannot config the software component ; Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the AWLAN driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else ; set ActivateDetection = TRUE set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif ;************************************************************** ; set the default values ;************************************************************** ; I/O Base Address = 0x240 set IOBaseAddrUIVal = "auto" ; IRQ Level = 11 set IRQValueUIVal = "auto" ; PcmciaValue = 0/1 set PcmciaValue = 1 set Chk1 = "ON" ; Ethernet conversion mode = "Encapsulated"/"RFC1042"/"802.1h" set EthConvList = $(EthConvList) set EthConvValues = $(EthConvValues) set EthConvUIVal = "RFC1042" ; Station Mode related default values set PSLevelValue = 0; ; Power Save Mode = "Disabled"/"Enhanced" set PSModeList = $(STA_PSModeList) set PSModeValues = $(STA_PSModeValues) set PSModeUIVal = "Disabled" ; configure as infrastructure station = "Infrastructure"/"AdHoc" set NetTypeList = $(STA_NetTypeList) set NetTypeValues = $(STA_NetTypeValues) set NetTypeUIVal = "Infrastructure" ; configure for 2 Mb/s default set TxRateList = $(STA_TxRateList) set TxRateValues = $(STA_TxRateValues) set TxRateUIVal = "Fully Auto" ; configure for ATIM Window Disabled set ATIMWindowList = $(STA_ATIMWindowList) set ATIMWindowValues = $(STA_ATIMWindowValues) set ATIMWindowUIVal = "default" ; configure for Listen interval at MAX set ListenIntervalList = $(STA_ListenIntervalList) set ListenIntervalValues = $(STA_ListenIntervalValues) set ListenIntervalUIVal = "default" ; configure for RTS/CTS disabled set RTSThreshList = $(RTSThreshList) set RTSThreshValues = $(RTSThreshValues) set RTSThreshUIVal = "default" ; configure for Fragmentation disabled set FragThreshList = $(FragThreshList) set FragThreshValues = $(FragThreshValues) set FragThreshUIVal = "default" ; configure for WEP Disabled set WepReqList = $(WepReqList) set WepReqValues = $(WepReqValues) set WepReqUIVal = "Disabled" ; PHY parameters DS set PHYParmName = "DSChannel"; set PHYParmList = $(DSChanList) set PHYParmValues = $(DSChanValues) set PHYParmUIVal = 6 set PHYParmLabel = "DS Channel:" ; default SSID - to be customized by OEM customer ;set SSIDValue = "IEEE802.11b WLAN" set SSIDValue = "" ;Station Name set ComputerNameKeyName = "SYSTEM\CurrentControlSet\Control\ComputerName\ComputerName" OpenRegKey $(!REG_H_LOCAL) "" $(ComputerNameKeyName) $(MAXIMUM_ALLOWED) ComputerNameBaseKey GetRegValue $(ComputerNameBaseKey) ComputerName StationNameTempList CloseRegKey $(ComputerNameBaseKey) set StationNameValue = *($(StationNameTempList),4) Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) ;----------------------------------------------- ; Installation Section ;----------------------------------------------- installadapter = + ; ; Create/recreate the Registry's PCMCIA database entry for the PCnet-Mobile. ; set KeyPcmciaDataBase = "" OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDataBaseKeyName) $(MAXIMUM_ALLOWED) KeyPcmciaDataBase Shell "" ExCreateRegKey $(KeyPcmciaDataBase) "AWLAN\WS8P/IEEE" OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDataBaseKeyName)"\AWLAN\WS8P/IEEE" $(MAXIMUM_ALLOWED) KeyTemp SetRegValue $(KeyTemp) {DeviceType,0,$(!REG_VT_SZ),"NET"} SetRegValue $(KeyTemp) {Driver,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)} CloseRegKey $(KeyTemp) CloseRegKey $(KeyPcmciaDataBase) ; ; Check whether the same version of the software exists ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) ; ; Same version already existed in the local machine ; Popup the dialog and ask the user whether he wants to continue ; CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) ; ; Cannot Install the same software again ; Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else ; ; Add a new adapter card? ; Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif ; ; dll load addition ; Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) install "Install-Dll" goto adaptersetup ;----------------------------------------------- ; Configuration Section ;----------------------------------------------- ; ; Get the current values of all the parameters ; configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif ; ; Get the other parameters; they're attached to the service parameters key ; Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) ; ; We don't need the services key, so close it. ; CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} ; ; Get the old values ; EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ; resources ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrItem = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set IRQValueItem = $(ValueData) ; general - combo else-ifstr(i) $(ValueName) == "DSChannel" set PHYParmItem = $(ValueData) else-ifstr(i) $(ValueName) == "NetworkType" set NetTypeItem = $(ValueData) else-ifstr(i) $(ValueName) == "TxRate" set TxRateItem = $(ValueData) else-ifstr(i) $(ValueName) == "ATIMWindow" set ATIMWindowItem = $(ValueData) else-ifstr(i) $(ValueName) == "ListenInterval" set ListenIntervalItem = $(ValueData) else-ifstr(i) $(ValueName) == "RTSThresh" set RTSThreshItem = $(ValueData) else-ifstr(i) $(ValueName) == "FragThresh" set FragThreshItem = $(ValueData) else-ifstr(i) $(ValueName) == "PSMode" set PSModeItem = $(ValueData) else-ifstr(i) $(ValueName) == "WepReq" set WepReqItem = $(ValueData) else-ifstr(i) $(ValueName) == "Encapsulation" set EthConvItem = $(ValueData) ; checkbox else-ifstr(i) $(ValueName) == "Pcmcia" set PcmciaValue = $(ValueData) ; edit else-ifstr(i) $(ValueName) == "SSID" set SSIDValue = $(ValueData) endif EndForListDo ;-------------------------------- ;Eric default ;-------------------------------- ifint $(PcmciaValue) == 1 set Chk1 = "ON" else set Chk1 = "OFF" endif set IOBaseAddrUIVal = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrItem))) ifstr(i) $(IOBaseAddrUIVal) == "" set IOBaseAddrUIVal = *($(IOBaseAddrList), 3) endif set IRQValueUIVal = *($(IRQList), ~($(IRQValues),$(IRQValueItem))) ifstr(i) $(IRQValueUIVal) == "" set IRQValueUIVal = *($(IRQList), 8) endif set PHYParmUIVal = *($(PHYParmList), ~($(PHYParmValues),$(PHYParmItem))) ifstr(i) $(PHYParmUIVal) == "" set PHYParmUIVal = *($(PHYParmList), 1) endif set NetTypeUIVal = *($(NetTypeList), ~($(NetTypeValues),$(NetTypeItem))) ifstr(i) $(NetTypeUIVal) == "" set NetTypeUIVal = *($(NetTypeList), 1) endif set TxRateUIVal = *($(TxRateList), ~($(TxRateValues),$(TxRateItem))) ifstr(i) $(TxRateUIVal) == "" set TxRateUIVal = *($(TxRateList), 1) endif set ATIMWindowUIVal = *($(ATIMWindowList), ~($(ATIMWindowValues),$(ATIMWindowItem))) ifstr(i) $(ATIMWindowUIVal) == "" set ATIMWindowUIVal = *($(ATIMWindowList), 1) endif set ListenIntervalUIVal = *($(ListenIntervalList), ~($(ListenIntervalValues),$(ListenIntervalItem))) ifstr(i) $(ListenIntervalUIVal) == "" set ListenIntervalUIVal = *($(ListenIntervalList), 6) endif set RTSThreshUIVal = *($(RTSThreshList), ~($(RTSThreshValues),$(RTSThreshItem))) ifstr(i) $(RTSThreshUIVal) == "" set RTSThreshUIVal = *($(RTSThreshList), 6) endif set FragThreshUIVal = *($(FragThreshList), ~($(FragThreshValues),$(FragThreshItem))) ifstr(i) $(FragThreshUIVal) == "" set FragThreshUIVal = *($(FragThreshList), 6) endif set PSModeUIVal = *($(PSModeList), ~($(PSModeValues),$(PSModeItem))) ifstr(i) $(PSModeUIVal) == "" set PSModeUIVal = *($(PSModeList), 1) endif set WepReqUIVal = *($(WepReqList), ~($(WepReqValues),$(WepReqItem))) ifstr(i) $(WepReqUIVal) == "" set WepReqUIVal = *($(WepReqList), 1) endif set EthConvUIVal = *($(EthConvList), ~($(EthConvValues),$(EthConvItem))) ifstr(i) $(EthConvUIVal) == "" set EthConvUIVal = *($(EthConvList), 3) endif ; Save the settings as they were read from the Registry. ; Shell $(ParamInf) Param_SaveValues ; Set CurrParamSettings = $($R0) ; ; Put up the adapter configuration dialog if necessary. ; ; Note that $(CurrParamSettings) has the old known parameter values. ; adaptersetup = + ; Shell "" DebugConfiguration "before displaying dialog" Set from = adapteroptions adapteroptions = + LoadLibrary "Disk 1" $(DialogDllName) hLib set PresentValues = "{"$(IOBaseAddrUIVal)","$(IRQValueUIVal)","$(StationNameValue)"}" LibraryProcedure result $(hLib) SetupDlg $(IOBaseAddrList) $(IRQList) $(PresentValues) FreeLibrary $(hLib) Ifstr(i) $(result) == "Setup dialog was cancelled, you can choice ignore or continue!" goto end Endif set IOBaseAddrUIVal = *($(result), 2) set IRQValueUIVal = *($(result), 3) set StationNameValue = *($(result), 1) ui pop 1 ; goto nextstep else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ; ; Unknow command ; ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif Debug-Output " Combo list out "$(ComboListItemsOut) ; ; If installing, go create the necessary keys; ; if configuring, they're already open. ; skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ; ; Add Software Component ; ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; ; At this point: ; $R1 contains the product version key handle; ; $R2 contains the NetRules subkey handle; ; $R3 contains the new Services key handle; and ; $R4 contains the Parameters key ; $R5 contains the Linkage Key ; set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif ; ; Create the HARDWARE\Netcard region and its corresponding service ; Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif ; ; At this point: ; $R1 Registry key variable for HARDWARE\Netcard\(n) ; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules ; $R3 Registry key handle for <service>\Parameters key ; $R4 Adapter number assigned to adapter ; $R5 Service name generated by combining svc name with adapter number ; set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters ; ; REQUIRED: $(KeyParameters) contains service Parameters key handle ; writeparameters = + Shell $(UtilityInf), GetBusTypeNum ; set BusTypeNum = $($R1) ; the above was not working so hard coding the bus type to 1 which represents ; NdisInterfaceIsa set BusTypeNum = 1 set BusNumber = 0 ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; ; Add the rest of the parameters to the Services area ; set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrUIVal))) set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueUIVal))) set PHYParmValue = *($(PHYParmValues), ~($(PHYParmList),$(PHYParmUIVal))) set NetTypeValue = *($(NetTypeValues), ~($(NetTypeList),$(NetTypeUIVal))) set TxRateValue = *($(TxRateValues), ~($(TxRateList),$(TxRateUIVal))) set ATIMWindowValue = *($(ATIMWindowValues), ~($(ATIMWindowList),$(ATIMWindowUIVal))) set ListenIntervalValue = *($(ListenIntervalValues), ~($(ListenIntervalList),$(ListenIntervalUIVal))) set RTSThreshValue = *($(RTSThreshValues), ~($(RTSThreshList),$(RTSThreshUIVal))) set FragThreshValue = *($(FragThreshValues), ~($(FragThreshList),$(FragThreshUIVal))) set PSModeValue = *($(PSModeValues), ~($(PSModeList),$(PSModeUIVal))) set WepReqValue = *($(WepReqValues), ~($(WepReqList),$(WepReqUIVal))) set EthConvValue = *($(EthConvValues), ~($(EthConvList),$(EthConvUIVal))) set NewValueList = {+ {MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+ {BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {IoLength, $(NoTitle),$(!REG_VT_DWORD),64},+ {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {Pcmcia, $(NoTitle),$(!REG_VT_DWORD),$(PcmciaValue)},+ {MajorVersion, $(NoTitle),$(!REG_VT_SZ),2},+ {MinorVersion, $(NoTitle),$(!REG_VT_SZ),0},+ {SSID, $(NoTitle),$(!REG_VT_SZ), $(SSIDValue)},+ {StationName, $(NoTitle),$(!REG_VT_SZ), $(StationNameValue)},+ {RTSThresh, $(NoTitle),$(!REG_VT_DWORD),$(RTSThreshValue)},+ {FragThresh, $(NoTitle),$(!REG_VT_DWORD),$(FragThreshValue)},+ {Encapsulation, $(NoTitle),$(!REG_VT_DWORD),$(EthConvValue)},+ {TxRate, $(NoTitle),$(!REG_VT_DWORD),$(TxRateValue)},+ {WepReq, $(NoTitle),$(!REG_VT_DWORD),$(WepReqValue)},+ {ATIMWindow, $(NoTitle),$(!REG_VT_DWORD),$(ATIMWindowValue)},+ {ListenInterval, $(NoTitle),$(!REG_VT_DWORD),$(ListenIntervalValue)},+ {NetworkType, $(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+ {PSMode, $(NoTitle),$(!REG_VT_DWORD),$(PSModeValue)},+ {PSLevel, $(NoTitle),$(!REG_VT_DWORD),$(PSLevelValue)},+ {DSChannel, $(NoTitle),$(!REG_VT_DWORD),$(PHYParmValue)},+ } Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful ;----------------------------------------------- ; Binding section ;----------------------------------------------- bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal ;----------------------------------------------- ; Removeadapter section ;----------------------------------------------- removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ;----------------------------------------------- ; Upgrade Software section ;----------------------------------------------- UpgradeSoftware = + ; ; First determine whether we want to do upgrade or update for software ; or hardware component. Then we will determine whether the Mode is ; update or upgrade. ; ; If the same version of the product existed in the registry, we do ; update. Otherwise, we will do a upgrade ; ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Upgrade software component ; ; see whether the same version exist or not ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) ; ; Update the binaries ; Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif ; Upgrade the version number ; SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ; ; do nothing for update ; ifint $(Version) != $(ProductVersion) ; ; If the major version number is not the same, ; it is major upgrade. So let Upgrade the product ; ; ; make other upgrade change if necessary ; endif CloseRegKey $(KeyProduct) else ; ; Cannot Open software key, goto ERROR ; goto fatalregistry endif else ; ; upgrade/update hardware component ; There is no different between upgrade and update for hardware ; component ; ; 1. Get the Service Name ; 2. Change the NetRule section if necessary ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) ; ; Get Service name ; GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) ; ; Change the NetRule if necessary ; OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) ; ; Make the change.... ; else ; ; Error, cannot open net rules key ; goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else ; ; Error, cannot open network card key ; goto fatalregistry endif ; ; 3. Change the service section of the hardware. i.e., ; ParameterName change, value change, etc. ; OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) ; ; Get the ServiceKey to change the Start value ; or Type value. Or open Parameters key to ; change the hardware parameters if necessary. ; CloseRegKey $(ServiceKey) else ; ; Error, cannot open network card key ; goto fatalregistry endif endif goto end ; ; End of Upgrade Software ; ; ; Escape hatches ; successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ; ; warning display ; warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif ; ; non fatal error display ; nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif ; ; Registry is broken ; fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal ; ; Netcard detection failure ; fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal ; ; fatal error display ; fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ; ; Shelling error ; ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ; ; if OEM_ABANDON_ON == TRUE, then remove the registry entries ; ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "OEMNADE2.INF" Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0) Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level) Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue) Debug-Output $(InfName)" TransceiverValue is "$(!p:TransceiverValue) Debug-Output $(InfName)" MemBaseAddrDec is "$(!p:MemBaseAddrDec) Debug-Output $(InfName)" MappedValue is "$(!p:MappedValue) return ;*************************************************************** ; INSTALL SECTIONS ;*************************************************************** [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" ; ; Add the files to the copy list ; ; BUGBUG: eliminate the "nt2" in the next line when Sunil fixes ; the other INF files ; AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) ;AddSectionFilesToCopyList Files-exe $(SrcDir) $(!STF_WINDOWSSYSPATH) ;AddSectionFilesToCopyList Files-exe $(SrcDir) $(!STF_WINDOWSPATH)"\Profiles\All Users\desktop" ;AddSectionFilesToCopyList Files-exe $(SrcDir) $(!STF_WINDOWSPATH)"\Profiles\All Users\Start Menu\Programs\Startup" endif ifstr(i) $(DoCopy) == "YES" ; Copy files in the copy list set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" ;set STF_VERSION = "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) ;AddSectionFilesToCopyList Files-exe $(SrcDir) $(!STF_WINDOWSPATH)"\Profiles\All Users\desktop" ;AddSectionFilesToCopyList Files-exe $(SrcDir) $(!STF_WINDOWSPATH)"\Profiles\All Users\Start Menu\Programs\Startup" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "AWLAN 11Mb 802.11 Adapter" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, oemsetup.inf, SIZE=40558, RENAME=$(!UG_Filename) [Files-AWLAN] 1, ep3nds.sys, SIZE=12800 [Files-Dll] 1, ws8.dll , SIZE=7168 ;[Files-exe] ;1, awlan.exe, SIZE=30000 [LanguagesSupported] ENG [OptionsTextENG] AWLAN = "IEEE 802.11b Wireless LAN Adapter (PCMCIA)" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = $(GenericAdapterName)" Setup" ProductSoftwareDescription = $(GenericDriverName) ProductHardwareDescription = $(GenericAdapterName) ProductSoftwareTitle = $(GenericDriverName) ProductHardwareTitle = $(GenericAdapterName) DialogDllName = "ws8.dll" IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) IRQList = ^(IRQChoices, 1) IRQValues = ^(IRQChoices, 2) DSChanList = ^(DSChanChoices, 1) DSChanValues = ^(DSChanChoices, 2) STA_NetTypeList = ^(STA_NetTypeChoices, 1) STA_NetTypeValues = ^(STA_NetTypeChoices, 2) STA_TxRateList = ^(STA_TxRateChoices, 1) STA_TxRateValues = ^(STA_TxRateChoices, 2) STA_ATIMWindowList = ^(STA_ATIMWindowChoices, 1) STA_ATIMWindowValues = ^(STA_ATIMWindowChoices, 2) STA_ListenIntervalList = ^(STA_ListenIntervalChoices, 1) STA_ListenIntervalValues= ^(STA_ListenIntervalChoices, 2) RTSThreshList = ^(RTSThreshChoices, 1) RTSThreshValues = ^(RTSThreshChoices, 2) FragThreshList = ^(FragThreshChoices, 1) FragThreshValues = ^(FragThreshChoices, 2) STA_PSModeList = ^(STA_PSModeChoices, 1) STA_PSModeValues = ^(STA_PSModeChoices, 2) WepReqList = ^(WepReqChoices, 1) WepReqValues = ^(WepReqChoices, 2) EthConvList = ^(EthConvChoices, 1) EthConvValues = ^(EthConvChoices, 2) [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [MemoryMappedChoicesENG] Map_1 = 1, "ON" Map_2 = 0, "OFF" [IOBaseAddrChoices] IOBase_auto = "auto", 512 IOBase_1 = "200",512 IOBase_2 = "240",576 IOBase_3 = "280",640 IOBase_4 = "2C0",704 IOBase_5 = "300",768 IOBase_6 = "340",832 IOBase_7 = "380",896 IOBase_8 = "3C0",960 [IRQChoices] IRQ_auto = "auto", 11 IRQ_1 = "3",3 IRQ_2 = "4",4 IRQ_3 = "5",5 IRQ_4 = "7",7 IRQ_5 = "9",9 IRQ_6 = "10",10 IRQ_7 = "11",11 IRQ_8 = "12",12 IRQ_9 = "15",15 [DSChanChoices] DSCHAN_1 = "1",1 DSCHAN_2 = "2",2 DSCHAN_3 = "3",3 DSCHAN_4 = "4",4 DSCHAN_5 = "5",5 DSCHAN_6 = "6",6 DSCHAN_7 = "7",7 DSCHAN_8 = "8",8 DSCHAN_9 = "9",9 DSCHAN_10 = "10",10 DSCHAN_11 = "11",11 [STA_NetTypeChoices] ;NETTYPE_ADHOC = "Pseudo-IBSS Station",3 NETTYPE_ADHOC = "AdHoc",3 NETTYPE_INFRA = "Infrastructure",1 [STA_TxRateChoices] TXRATE_1 = "1 Mb/s", 1 TXRATE_2 = "2 Mb/s", 2 TXRATE_1_2 = "Auto 1 or 2 Mb/s", 3 TXRATE_55 = "5.5 Mb/s", 4 TXRATE_11 = "11 Mb/s", 8 TXRATE_ALL = "Fully Auto", 15 [STA_ATIMWindowChoices] ATIMWIN_0 = "default", 0 ATIMWIN_10 = "10 ms", 10 ATIMWIN_20 = "20 ms", 20 ATIMWIN_30 = "30 ms", 30 ATIMWIN_40 = "40 ms", 40 ATIMWIN_50 = "50 ms", 50 ATIMWIN_60 = "60 ms", 60 ATIMWIN_70 = "70 ms", 70 ATIMWIN_80 = "80 ms", 80 ATIMWIN_90 = "90 ms", 90 [STA_ListenIntervalChoices] LISTENINT_1 = "1 Beacon Per", 1 LISTENINT_2 = "2 Beacon Per", 2 ;LISTENINT_3 = "3 Beacon Per", 3 LISTENINT_4 = "4 Beacon Per", 4 LISTENINT_5 = "5 Beacon Per", 5 LISTENINT_3 = "default", 3 LISTENINT_M = "Maximum", 6 [STA_PSModeChoices] PS_DIS = "Disabled", 1 PS_ENH = "Enhanced", 2 [RTSThreshChoices] RTSTHRESH_256 = "256 Bytes", 256 RTSTHRESH_512 = "512 Bytes", 512 RTSTHRESH_768 = "768 Bytes", 768 RTSTHRESH_1024 = "1024 Bytes", 1024 RTSTHRESH_1280 = "1280 Bytes", 1280 RTSTHRESH_DIS = "default", 2432 [FragThreshChoices] FRAGTHRESH_256 = "256 Bytes", 256 FRAGTHRESH_512 = "512 Bytes", 512 FRAGTHRESH_768 = "768 Bytes", 768 FRAGTHRESH_1024 = "1024 Bytes", 1024 FRAGTHRESH_1280 = "1280 Bytes", 1280 FRAGTHRESH_DIS = "default", 2432 [WepReqChoices] WEP_DIS = "Disabled", 0 ;WEP_MAN = "Mandatory", 2 [STA_List] "STA_HAR_PCM" "STA_LUC_PCM" [DS_List] "STA_HAR_PCM" "STA_LUC_PCM" [EthConvChoices] EthConv_Encapsulated ="Encapsulated", 0 EthConv_RFC1042 ="RFC1042", 1 EthConv_802.1h ="802.1h", 2 [ExCreateRegKey] Debug-Output "******************Entering [ExCreateRegKey]******************" set ECR_Result = NO_ERROR set ECR_BaseKeyHandle = $($0) set ECR_NewPath = $($1) set KeyNull = "" set MAXIMUM_ALLOWED = 33554432 Debug-Output "ExCreateRegKey - ECR_BaseKeyHandle = "$(ECR_BaseKeyHandle) Debug-Output " ECR_NewPath = "$(ECR_NewPath) Debug-Output " MAXIMUM_ALLOWED = "$(MAXIMUM_ALLOWED) Debug-Output " KeyNull = "$(KeyNull) OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) + ECR_BaseKey Debug-Output "ECR_BaseKey = "$(ECR_BaseKey) Debug-Output " OpenRegKey returned "$($R0) Ifstr $(ECR_BaseKey) == $(KeyNull) Debug-Output "ECR_BaseKey == KeyNull" Else Debug-Output "ECR_BaseKey != KeyNull" set ECR_KeyHandle = $(ECR_BaseKey) goto ECR_Return Endif set ECR_TmpPath = "" Split-String $(ECR_NewPath) "\" ECR_PList Debug-Output "ECR_PList = "$(ECR_PList) ForListDo $(ECR_PList) Ifstr(i) $($) != "\" Ifint $(#) == 1 set ECR_TmpPath = $($) Else set ECR_TmpPath = $(ECR_TmpPath)"\"$($) Endif Debug-Output "Determining if "$(ECR_TmpPath)" exists" OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey Ifstr $(ECR_BaseKey) == $(KeyNull) Debug-Output "Creating "$(ECR_TmpPath) CreateRegKey $(ECR_BaseKeyHandle) {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle Ifstr(i) $(ECR_KeyHandle) == $(KeyNull) set ECR_Result = $($R0) goto ECR_Return Endif Endif Endif EndForListDo ECR_Return = + return $(ECR_Result) $(ECR_KeyHandle)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.