1. BlueManager.exe Driver
2. ESIPrt98.inf File Contents

ESIPrt98.inf Driver File Contents (BlueManager.exe)

[version]
LayoutFile=layout.inf,layout1.inf,layout2.inf
signature="$CHICAGO$"
Class=Modem
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%XtndInc%
DriverVer=5/21/2001,1.03.000.0

;----------------------------------------------------------------------------
; Available installations
;----------------------------------------------------------------------------
[Manufacturer]
%XtndInc%=XTND

[XTND]
%Serial% = BTPort, XTND\BTSERIAL ;Virtual Port
%DUNHost% = BTPort, XTND\BTDUNHOST ;Virtual Port

;----------------------------------------------------------------------------
; Driver Install Section
;----------------------------------------------------------------------------
[BTPort]
AddReg = All, MfgAddReg, mfglt, USB

[All]
HKR,,FriendlyDriver,0,Unimodem.vxd
HKR,,DevLoader,0,*vcomm
HKR,,ConfigDialog,0,modemui.dll
HKR,,EnumPropPages,0,modemui.dll,EnumPropPages
HKR,,PortSubClass,1,02

[USB]
HKR,, DeviceType, 1, 01
HKR,,PortDriver,,wdmmdmld.vxd
HKR,,Contention,0,

[MfgAddReg]
HKR,, Properties, 1, c0,01,00,00, ff,00,00,00, ff,00,00,00, 07,00,00,00, 0f,00,00,00, f7,03,00,00, 00,c2,01,00, C0,DA,00,00
HKR,, FClass, 1, c3,00,00,00
HKR, Fax, CL1FCS,, "2"

[mfglt]
HKR,, InactivityScale,1, 3c,00,00,00
HKR, Init,      1,, "AT<cr>"
HKR, Init,      2,, "AT &F E0 &C1 &D2 V1 S0=0\V1<cr>"
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Answer,    1,, "ATA<cr>"
HKR, Hangup,    1,, "ATH E1<cr>"
HKR,, Reset,, "AT&F<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ";"
HKR, Settings, FlowControl_Off,, "&K0"
HKR, Settings, FlowControl_Hard,, "&K3"
HKR, Settings, FlowControl_Soft,, "&K4"
HKR, Settings, ErrorControl_On,, "\N3"
HKR, Settings, ErrorControl_Off,, "\N1"
HKR, Settings, ErrorControl_Forced,, "\N4"
HKR, Settings, Compression_Off,, "%%C0"
HKR, Settings, Compression_On,, "%%C1"
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, Blind_On,, "X3"
HKR, Settings, InactivityTimeOut,,"S30=<#>"

HKR, Responses, "0<cr>",  1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK - Command executed
HKR, Responses, "1<cr>",  1, 02, 00, 00,00,00,00, 00,00,00,00 ; CONNECT - Connection
HKR, Responses, "2<cr>",  1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING - Ring signal indicated
HKR, Responses, "3<cr>",  1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER
HKR, Responses, "4<cr>",  1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR - Invalid command
HKR, Responses, "5<cr>",  1, 02, 00, B0,04,00,00, 00,00,00,00 ; CONNECT 1200
HKR, Responses, "6<cr>",  1, 05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE - No dial tone detected
HKR, Responses, "7<cr>",  1, 06, 00, 00,00,00,00, 00,00,00,00 ; BUSY - Engaged (busy) signal
HKR, Responses, "8<cr>",  1, 07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER
HKR, Responses, "<cr><lf>OK<cr><lf>",          1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>",        1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>",       1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIAL TONE<cr><lf>",1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>",        1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>",  1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>",  1, 07, 00, 00,00,00,00, 00,00,00,00

[Strings]
XtndInc          = "Windigo Systems"
Serial = "Bluetooth Serial"
DUNHost = "Bluetooth DUN Host"

XTND.ServiceDesc   = "Bluetooth Serial Driver"