String.ini Driver File Contents (book3600_plus_V4222_8L.zip)

[Tooltips]
1=Switch to the Advanced Scan Mode.
2=Auto Scan: Flatbed Reflective, Color Photo %s1 dpi, Grayscale %s2 dpi, Text %s3 dpi
3=Auto Scan: Positive Film, Color Photo %s1 dpi, Grayscale %s2 dpi, Text %s3 dpi
4=Auto Scan: Negative Film, Color Photo %s1 dpi, Grayscale %s2 dpi, Text %s3 dpi
5=Scanner Information
6=Help
7=Open the Auto Scan Control Panel.
8=Save Settings &&& Exit
9=Scan Source: Flatbed Reflective
10=Scan Source: Positive Film
11=Scan Source: Negative Film
12=Select the color photo scanning resolution.
13=Select the grayscale scanning resolution.
14=Select the text scanning resolution.
15=Select the color photo scanning resolution.
16=Select the grayscale scanning resolution.
17=Select the text scanning resolution.
18=Select the color photo scanning resolution.
19=Select the grayscale scanning resolution.
20=Select the text scanning resolution.
21=Undo
22=Close
23=Web Link
24=Panel Selection
25=Scan Template in Use
26=Select the scan template.
27=Control Panel for User-defined Scan Templates
28=Sound Settings 
29=Turn Inverse Off
30=Turn Auto Density Off
31=Detailed Preview
32=Preview
33=Scan
34=Switch to the Auto Scan Mode.
35=Exit
36=Select the panel.
37=Cancel Speedy Scan
38=Currently-selected Panel
39=Select the panel.
40=Save
41=Save as ... 
42=Rename ... 
43=Delete
44=Cancel Batch Scan
45=Save as a new scan template by using current settings.
46=New scan template name
47=OK
48=Cancel
49=Rename the selected scan template.
50=Original Name
51=New Name
52=OK
53=Calibrate
54=Browse ...
55=Browse ...
56=Trial Play
57=Trial Play
58=Start playing the selected sound file.
59=Start playing the selected sound file.
60=Stop playing the selected sound file.
61=Stop playing the selected sound file.
62=Select the sound file.
63=Select the sound file.
65=Basic Image Settings
66=Scan Source: Flatbed Reflective
67=Scan Source: ADF (Automatic Document Feeder)
68=Scan Source: Positive Film
69=Scan Source: Negative Film
70=Scan Frame Size
71=Scan Mode
72=Resolution
73=Brightness
74=Contrast
75=Open the Sizing Control Panel. 
76=Sheet Feeder 
77=Select the scan frame size.
78=Select the scan frame size.
79=Select the scan mode.
80=Select the scan mode.
81=Select the scanning resolution.
82=Select the scanning resolution.
83=Add darkness to all colors in your image.
84=Add lightness to all colors in your image.
85=Lower the differences between light and dark colors in your image.
86=Raise the differences between light and dark colors in your image.
87=Image Output Scale
88=Proportionally enlarge the image.
89=Proportionally shrink the image.
90=Image Crop Size
91=Close this Sizing Control Panel.
92=Advanced Image Settings
93=Zoom out 
94=Current Zoom Scale
95=Zoom in
96=All Color Channels
97=Red Channel
98=Green Channel
99=Blue Channel
100=Advanced Image Settings: Gamma
101=Default
102=Advanced Image Settings: Tone Map
104=Advanced Image Settings: Color Correction
105=Hue
106=Saturation
107=Lightness
109=Advanced Image Settings: Histogram
110=Highlight
111=Midtone
112=Shadow
113=Highlight
114=Midtone
115=Shadow
117=Advanced Image Settings: Dither &&& Threshold
118=Zoom out
119=Current Scale
120=Zoom in
121=Decrease the threshold value.
122=Increase the threshold value.
123=Automatic Threshold Setting
125=Preference Settings
126=Decrease the RGB value.
127=Increase the RGB value.
128=Magnifying Glass
129=Hand Tool
130=Rotate &&& Mirror
131=Auto Dust Removal
132=Turn Inverse On
133=Turn Auto Crop On
134=Turn Auto Crop Off
135=Turn Auto Density On
136=Activate Speedy Scan
137=Activate Batch Scan
138=Batch Scan Control Panel
139=Unit: Inch
140=Unit: cm
141=Unit: Pixel
142=Unit: Point
143=Display Image Adjustment Tools
144=Hide Image Adjustment Tools
145=Rotate 90° Counter-clockwise
146=Rotate 90° Clockwise
147=No Rotation/Flipping
148=Flip Horizontally
149=Flip Vertically
151=No Image Filter
152=An image filter is applied.
153=Select the image filter
154=Select the image filter.
155=Select the image filter.
157=No Descreen Filter
158=A descreen filter is applied.
159=No Descreen Filter
160=Descreen Filter: Newspaper
161=Descreen Filter: Magazine
162=Descreen Filter: Art Magazine
163=Custom
164=Specify the descreen resolution.
166=Delete this image.
168=Cancel
170=Red Channel
171=Green Channel
172=Blue Channel
173=Automatic Optimal Channel Selection
174=Retry
175=Scan Job 1
176=Scan Job 2
177=Scan Job 3
178=Scan Job 4
179=Scan Job 5
180=Scan Job 6
181=Scan Job 7
182=Scan Job 8
183=Scan Job 9
184=Scan Job 10
185=Scan Job 11
186=Scan Job 12
187=Scan Job 13
188=Scan Job 14
189=Scan Job 15
190=Scan Job 16
191=Scan Job 17
192=Scan Job 18
193=Scan Job 19
194=Scan Job 20
195=Scan Job 21
196=Scan Job 22
197=Scan Job 23
198=Scan Job 24
199=Scan Job 25
200=Scan Job 26
201=Scan Job 27
202=Scan Job 28
203=Scan Job 29
204=Scan Job 30
205=Scan Job 31
206=Scan Job 32
207=Scan Job 33
208=Scan Job 34
209=Scan Job 35
210=Scan Job 36








[Other]
1=Program was unable to use the scanner because it is being used by another application. Please re-scan after the other application has finished.
2=Program was unable to perform the scan because the port your scanner is connected to is in use by other device.
3=Program was unable to allocate enough memory to perform this action. Close other programs and windows and try again.
4=Program was unable to find your scanner. Please disconnect both the scanner cable and power adapter and then reconnect them. Ensure that you have made all the proper connections as instructed in the Quick Guide and User's Guide. If you still experience problems, please consult the troubleshooting section of the User's Guide located on the CD-ROM.
5=Cannot find a document.  Please put the document or image in your scanner to begin the scan process.
6=Program was unable to load TWAIN to connect with the application.
7=Text
8=Grayscale
9=Color Photo
10=Optimal 256 Colors
11=Web Photo
12=16-bit Grayscale
13=48-bit Color Photo
14=None
15=Halftone
16=Error Diffusion
17=Remove the Background
18=Threshold
19=X:
20=Y:
21=W:
22=H:
23=Image Size:
24=Resolution:
25=Scan Mode:
26=Custom
27=None
28=Advanced Scan(%1)
29=Auto Scan Control Panel
34=Do not show this message again. 
35=(%1 - %2 lpi)
36=Auto Preview at Startup
37=Save Preview Image
38=Color sRGB
39=Always on Top
40=Fast Preview
41=Fast Scan
42=Monitor Calibration
43=In: %1   Out: %2
44=Play music during scanning.
45=Play sound when scanning is completed.
46=The user interface will be switched to the Manual Scan Mode allowing you to tailor your scans by manually making any desired adjustments.  Click the [OK] button to continue or the [Cancel] button to abort.
47=Please wait while the scanner module is returning to its home position. 
48=Cannot find any image crop! Please re-place the document or image.
49=Bring Crop to Top
50=Push Crop to Bottom
51=Delete This Crop
52=X: %1   Y: %2   W: %3   H: %4   Output Scale: %5\nImage Size: %6   Resolution: %7
53=Scanner Information
54=Scanner Model:
55=TWAIN:
56=F/W Version:
57=Driver Version:
58=Copyright:
59=Please wait while the scanner warms up.
60=Click the [Cancel] button to abort.
61=Please wait while the scanner is being calibrated.
62=Previewing is in progress.  Please wait.
63=Click the [Cancel] button to abort.
64=Scanning is in progress.  Please wait.  (Page %1/%2)
65=Click the [Cancel] button to abort.
66=Scanning is in progress.  Please wait.  (Page %1)
67=Transferring image data.  Please wait.  (Page %1/%2)
68=Click the [Cancel] button to abort.
69=Transferring image data.  Please wait.  (Page %1)
70=This effect appears in the final scanned image only. The preview image is not affected.
71=This effect appears in the final scanned image only. The preview image is not affected.
72=This effect appears in the final scanned image only. The preview image is not affected.
73=Program was unable to find some components of the software. Please re-install your scanner's software.
74=Program was unable to save the scanned image into the target file, probably due to a lack of disk space.
75=The program is not compatible with the current scanner driver. Please contact your dealer to upgrade your driver.
76=TWAIN is already running.
77=Scan Failed!
78=Disk I/O error or Disk full.
79=The application you are using can not accept 48-bit color images. Please choose another scan mode.
80=The application you are using can not accept 16-bit gray images. Please choose another scan mode.
81=Note: To take advantage of an image scanned at 48-bit color, your application must support 48-bit color images. If 48-bit is not supported by your application, the application will display an error message or the 48-bit color image will be displayed using 24 bits, resulting in a bad image. If this happens, it is recommended that you scan the image with the 48-bit color mode disabled.
82=Note: To take advantage of an image scanned at 16-bit grayscale, your application must support 16-bit grayscale images. If 16-bit is not supported by your application, the application will display an error message or the 16-bit grayscale image will be displayed using 8 bits, resulting in a bad image. If this happens, it is recommended that you scan the image with the 16-bit grayscale mode disabled.
83=The Image Output Scale you have changed on this control panel will not be saved after you close this control panel.  \n\nAre you sure you want to close this control panel?
84=Rotate && Mirror
85=Rename (Scan Template)
86=Scan Template Control
87=Save As (Scan Template)
88=Sound Settings (%1)
89=Batch Scan Control Panel
90=Filter 
91=Descreen
92=Panel Selection (%1)
93=Do you want to delete the scan template: %1?
94=Do you want to overwrite the scan template: %1?
95=The template name you wish to use for saving new settings happens to be the same as one of the default template names.  The default scan templates are very handy to you for obtaining optimum scans with frequently-used applications, and their settings therefore can not be altered in any way.  Please enter another new name.
96=This template name (%1) has already existed!\n\nDo you want to replace anyway?
97=The settings have been successfully saved by the new name: %1.
98=The name you wish to use for renaming an existing template happens to be the same as one of the default template names.  The default scan templates are very handy to you for obtaining optimum scans with frequently-used applications, and their settings therefore can not be altered in any way.  Please enter another new name.
99=This template name (%1) has already existed!\n\nDo you want to replace anyway?
100=The template has been successfully renamed as: %1.
101=The user interface will be switched to the Auto Scan Mode. Click the OK button to continue or the Cancel button to abort.
102=Audio File (*.wav; *.aiff)
103=MIDI file (*.mid; *.rmi; *.midi)
104=MP3 file (*.mp3)
105=Windows Media Audio file (*.wma)
106=Apply Auto Deskew after Auto Crop
107=The usual screened pattern for fine printed magazine is 200 lpi (line per inch) in terms of natural characteristics of printing press and paper. Therefore, high scanning resolution (>400dpi) does not enhance the image quality of pictures scanned from any printed materials such as magazines; on the contrary, it only dramatically increases the file size, occupies more memory resources and disk space, and slows everything down. \n\nAre you sure you want to use this resolution?
108=The selected sound file can no longer be found in the specified file folder.  Please select another sound file or uncheck the option box from the Sound Settings window.
109=Applying the descreen filter. Please wait. (Page %1/%2)
110=Applying the descreen filter. Please wait. (Page %1)
111=Applying the %1 Filter. Please wait. (Page %2/%3)
112=Applying the %1 Filter. Please wait. (Page %2)
113=To achieve image accuracy, please place the same image or document used in this preview and align it at the same position when you conduct the final scan.
114=Auto Scan (%1)
115=%1 is in progress.  Please wait.
116=Processing the dust removal.  Please wait.
117=Processing the background removal.  Please wait.
118=Generic Error
119=Scan failed!  Please check the power connection by disconnecting the power adapter from the scanner and then reconnecting it.
120=Paper jam!  Please remove the paper and replace it into the scanner's paper input tray.
121=The sound file is not found. Please click the [Browse] button to select an appropriate sound file or uncheck the option box.
122=The Color sRGB mode you have chosen does not support the image enhancement settings available in this Advanced Image Settings tab.
123=The scan mode you have chosen does not support the image enhancement settings available in this Color Correction tab.
124=The scan cannot be proceeded because the required scanner calibration data are not found in your system.  Please calibrate this scanner first.\n\nFollow these steps to calibrate the scanner:\n1. Right-click the %1 icon in the task bar (near the clock).\n2. Click [Calibration Wizard] from the pop-up menu to launch the wizard.\n3. Follow the on-screen instructions to complete the calibration.   
125=The transparency adapter (%1) is not found.  Please consult the quick guide for more details.\n\nYou may click the [Retry] button after placing the %1 on the scanner properly.  To scan films later, click the [Cancel] button.
126=Allocating system memory...
127=Processing speed scan settings...
128=Processing auto deskew...
129=Optimizing the image...
130=Processing color matching...
131=Processing image orientation (rotate, flip and/or mirror)...
132=Processing color correction...
133=The image size is too large for the system to handle efficiently, so image orientation (rotate, mirror and/or auto deskew) will not be processed.\n\nYou may use an image editing program to manually rotate the image afterwards.
134=Previewing the image and indexing pallets for Optimal 256 Colors.  Please wait.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.74