; PT_4100.INI [settings] ;************************************************************************** ; Devmode Overrides ; These only override the initial default values ; Once the driver is initialized these values will then have no effect ; Cartridge Type default ; possible values: ; 0 = 1-Color; 1 = 3-Color; 2 = 4-Color CartridgeType = 2 ; Resolution default ; 0 = Quality 1 (1-pass Draft); 1 = Quality 2 (2-pass); 2 = Quality 3 (4-pass); 3 = Quality 4 (8-pass) Resolution = 3 ; Saturation default ; 0 to 100 possible ;Saturation = 100 ; Inner Diameter default ; 0 to 500 possible (ie. 386 = 38.6mm) InnerDiameter = 230 ; Outer Margin default ; 0 to 20 possible (ie. 20 = 2.0mm) OuterMargin = 9 ; Override for bi-di printing ; Set to zero to turn OFF bi-directional printing ;Bidi = 0 **************************************************************************** ;Ink spits in full cartridge (in M) ColorSpits = 2000 BlackSpits = 3540 ; Amount of data to allow into print buffer before releasing print ; (in KBytes) PrintBufferLimit = 100 ; Override values for left and top offset, default values ; are TopMarginOffset=0, and LeftMarginOffset = 0 ; TOP-- TopOffset_120mm = 0 TopOffset_80mm = 0 TopOffset_Business = 0 TopOffset_Hockey = 0 TopOffset_Vinyl = 0 ; LEFT-- LeftOffset_120mm = 0 LeftOffset_80mm = 0 LeftOffset_Business = 0 LeftOffset_Hockey = 0 LeftOffset_Vinyl = 0 ;Media and Quality Overrides, the following values are accepted ; Media: 1= MT_PLAIN,2=MT_COATED,3=MT_GLOSSY, 4=MT_TRANSPARENCY, ; 5=MT_IRON_ON_TRANSFER,6=MT_GREETING_CARD,7=MT_GLOSSY1,8=MT_GLOSSY2,9=MT_GLOSSY3, ; Quality: 1= PQ_QUICK_PRINT,2=PQ_NORMAL,3=PQ_BETTER, 4=PQ_BEST,5=PQ_AUTOMATIC MediaType_Quality1_K = 1 PrintQuality_Quality1_K = 1 MediaType_Quality1_CMY = 1 PrintQuality_Quality1_CMY = 1 MediaType_Quality1_CMYK = 1 PrintQuality_Quality1_CMYK = 1 MediaType_Quality2_K = 1 PrintQuality_Quality2_K = 2 MediaType_Quality2_CMY = 1 PrintQuality_Quality2_CMY = 2 MediaType_Quality2_CMYK = 1 PrintQuality_Quality2_CMYK = 2 MediaType_Quality3_K = 1 PrintQuality_Quality3_K = 4 MediaType_Quality3_CMY = 1 PrintQuality_Quality3_CMY = 4 MediaType_Quality3_CMYK = 2 PrintQuality_Quality3_CMYK = 2 MediaType_Quality4_K = 5 PrintQuality_Quality4_K = 4 MediaType_Quality4_CMY = 3 PrintQuality_Quality4_CMY = 4 MediaType_Quality4_CMYK = 2 PrintQuality_Quality4_CMYK = 4 ; DEBUGGING ; ; ***NOTE: for debugging to work with the "_u" driver you must also place this .INI file at C:\ ; ; turn debugging ON (1) or OFF (0) -- default is OFF if not specified DebugOn = 1 ; AMOUNT OF DEBUG INFO ; LEVEL = 0 through 6 (lower numbers give more debug info) ; 0 = DBGLVL_ZERO ; 1 = DBGLVL_TRACE ; 2 = DBGLVL_DUMP ; 3 = DBGLVL_INFORM (default if not specified) ; 4 = DBGLVL_WARNING ; 5 = DBGLVL_ERROR ; 6 = DBGLVL_FATAL DebugThreshold = 3 ; Turn on/off timestamp in the debug file ; 0=off 1=on TimeStamp=1 ; Amount of image sharpening ; 0 = off ; 1-10 = increasing sharpening levels ; 11 = automatic ; 12 = off SharpenLevel = 11 ; Number of passes override for Quality 1-4 ; NumPasses can be: 1,2,4,8,16 NumPasses_1=1 NumPasses_2=2 NumPasses_3=4 NumPasses_4=8 ; Carrier Speed Override for Quality 1-4 ; Override print carrier speed (in inches per second) ;CarrierSpeed_1 = 30 ;CarrierSpeed_2 = 30 ;CarrierSpeed_3 = 30 ;CarrierSpeed_4 = 30 ; Print Direction Override ; This overrides print direction (when driver is not set to Bidi) ; PrintDirectionOverride1 is for cartridge 1 and PrintDirectionOverride2 is for cartridge 2 ; = 1 = LTOR ; = 2 = RTOL PrintDirectionOverride1 = 2 PrintDirectionOverride2 = 2 ; IgnoreDirection ; If set to 1, the print direction will not be specified IgnoreDirection=0 ; Write output to FILE in addition to sending to the printer? ; Comment this line out for no PRN to be saved ; Or, set it to the filename (including path) you want to save ;PRN_TO_SAVE=c:\4100_Output.prn ; Send Print Setup Command ; 1=yes 0=no PrintSetupCmd=1 ; Delay (in msec) before sending final Print Complete Command ; NOTE: cannot cut too short or printing will not finish DelayBeforeFinalCmd=20Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.