3112 SATALink-RAID.txt Driver File Contents (87100.zip)

Sil 3112 SATALink/RAIDSil 3112 SATALink/RAID 
      Serial ATA Device Driver / Adapter
      Silicon Image 


      Tested and Approved with the following Novell products:
      NetWare® 6NetWare® 6.5

      Product Description
      Sil 3112 SataLink/Raid Controller, 2 Channel, with built in Raid 0 and 
      Raid 1.

      Primary Driver File(s)
      SI3112.HAM(103675 bytes 09-Mar-2004 09:05 pm v2.01d)

      Driver Support File(s)
      SI3112.DDI(19571 bytes 08-Mar-2004 09:01 am v2.14)

      Test Configuration
      Product NameSil 3112 SATALink/RAID
      CD-ROM DriveIntel® CDU5211; Firmware YYS7; ATAPI
      Hard Disk DriveMaxtor® 4R080L3; 81.9 GB; Firmware RAMB54U0431; Serial ATA 
      150 (SATA150)
      Maxtor® 6Y080M0; 81.9 GB; Firmware YAR51BW0431; Serial ATA 150 (SATA150)
      Host Bus Adapter2 Silicon Image Sil 3112; PCI; BIOS 4.2.46; Channels 2; 
      Chipset SiI 3112; Firmware SiI 3112; Serial ATA ; 
      PCI.1095.3112.1095.6112.02; Version 1.21
      SystemIntel® Vero Beach; Xeon(TM) CPU 2.40GHz ; BIOS Phoenix 4.0 Release 
      6.0 08/15/03; PCI-ISA; Memory 512 MB

      Configuration Note(s)
      The IDE/ATA interface does not support fault tolerance.
      Vero Beach requires MPS14.PSM Ver 3.00 April 11, 2003.

      The term Tested and Approved applies only to the exact configuration 
      documented in this bulletin. For more information regarding the specific 
      test configuration, please contact:

      Silicon Image
      1060 E Arques Ave
      Sunnyvale, CA 94085
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.20