[VendorInformation] Name=Movimento Address1=Anders Personsgatan 12 Address2= City=Gothenburg Country=Sweden Postal=SE-416 64 Telephone=+46 (0)31 3333390 Fax=+46 (0)31 157611 VendorURL=www.movimentogroup.com MessageString= ErrorString= TimestampWeight=1000 ; The DebugLevel is entered as an 8 bit bitcoded hex value: ; bit 0: LOG_DEBUG_CALL ; bit 1: LOG_SERIAL_COM ; bit 2: LOG_FUNCTION_LOGIC ; bit 3: LOG_ERRORS ; bit 4: LOG_WLAN_SETUP ; bit 5: LOG_FIRMWARE_DOWNLOAD ; bit 6: LOG_MEASUREMENT ; ; E.g. "DebugLevel= 0" means log nothing ; "DebugLevel= 0xFF" means log everything ; "DebugLevel= 0x18" means log errors and wlan setup DebugLevel= 0 ; Set DebugMode= 0 to overwrite the logfile every time ; the DLL is reloaded, and DebugMode= 1 to append to the logfile. DebugMode= 0 DebugFile= \uwaTest.txt DebugFileSize=-1 NumberOfRTSCTSSessions=1 CANFormatsSupported=4 J1939FormatsSupported=1,2 J1708FormatsSupported=1,2 ISO15765FormatsSupported=1,2 Devices=16,17,32,48 Protocols=0,1,2,3,4,5,6,7,8 [DeviceInformation16] DeviceId=16 DeviceDescription=Puma Interface Module, USB0 DeviceName=Puma DeviceParams=Transport=USB USB_DeviceNo=0 [DeviceInformation17] DeviceId=17 DeviceDescription=Puma Interface Module, USB1 DeviceName=Puma DeviceParams=Transport=USB USB_DeviceNo=1 [DeviceInformation32] DeviceId=32 DeviceDescription=Puma Interface Module, WLAN DeviceName=Puma DeviceParams=Transport=WLAN WLAN_ComMode=Adhoc,WLAN_HostIP=192.168.0.1,WLAN_HostMask=255.255.255.0,WLAN_AdapterIP=192.168.0.2,WLAN_SSID=Puma ; RS232 over USB; device used for PDAs ; To find the COM port used, start the registry editor and look in HKEY_LOCAL_MACHINE\Drivers\Active and ; take Name for the device with Key=Drivers\Builtin\USB. ; ; USB on RECON (gray): COM8 ; USB on RECON (yellow): COM0 ; USB on old Axim: COM2 (didn't work however) ; Asus MyPAL: COM2 ; iPAQ 5550: COM9 ; HP 2790: COM4 ; Intermec: COM7 [DeviceInformation48] DeviceId=48 DeviceDescription=Puma Interface Module, PDA-USB DeviceName=Puma DeviceParams=Transport=COM RS232_Port=7 RS232_Baud=57600 RS232_OverUSB=1 [ProtocolInformation0] ProtocolDescription=Generic CAN ProtocolSpeed=all ProtocolString=CAN ProtocolParams=Protocol=CAN Devices=16,17,32,48 [ProtocolInformation1] ProtocolDescription=J1708 Link Layer protocol ProtocolSpeed=9600,14400,19200,34800,57600,115200 ProtocolString=J1708 ProtocolParams=Protocol=J1708 Devices=16,17,32,48 [ProtocolInformation2] ProtocolDescription=ISO9141 Network protocol ProtocolString=ISO 9141 ProtocolParams=Protocol=ISO9141 Devices=16,17,32,48 [ProtocolInformation3] ProtocolDescription=J1850 Network protocol ProtocolSpeed=10.4,41.6,83.3 ProtocolString=J1850 ProtocolParams=Protocol=J1850 Devices=16,17,32,48 [ProtocolInformation4] ProtocolDescription=3-byte Header J1850 at 10.4k Baud ProtocolSpeed=10.4,41.6 ProtocolString=J1850_104k ProtocolParams=Protocol=J1850_104k Devices=16,17,32,48 [ProtocolInformation5] ProtocolDescription=3-byte Header J1850 at 41.6k Baud ProtocolSpeed=41.6,83.3 ProtocolString=J1850_416k ProtocolParams=Protocol=J1850_416k Devices=16,17,32,48 [ProtocolInformation6] ProtocolDescription=Analog and Digital IO protocol ProtocolString=IO ProtocolParams=Protocol=IO Devices=16,17,32,48 [ProtocolInformation7] ProtocolDescription=J1939 Link Layer protocol ProtocolSpeed=all ProtocolString=J1939 ProtocolParams=Protocol=J1939 Devices=16,17,32,48 [ProtocolInformation8] ProtocolDescription=ISO15765 Link Layer protocol ProtocolSpeed=all ProtocolString=ISO15765 ProtocolParams=Protocol=ISO15765 Devices=16,17,32,48Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.