1. silhouette64.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (silhouette64.zip)

Graphtec Craft ROBO Driver OPS653 Ver. 4.10B
for Microsoft Windows XP x64 Edition/Windows Vista x64 Edition/Windows 7 x64 Edition

Thank you for choosing the Graphtec OPS653 Craft ROBO Driver. 

The README.TXT file in each directory contains instructions on installation and
operation as well as other notes. Be sure to read them carefully before 
installing or using this driver.

Before you begin installation, check that the program disk contains the 
following:

  WINXP_VISTA_X64\DISK1           For Windows XP x64 Edition /
  WINXP_VISTA_X64\GPCR.GPD            Windows Vista x64 Edition /
  WINXP_VISTA_X64\CC300.GPD           Windows 7 x64 Edition
  WINXP_VISTA_X64\CC300L.GPD
  WINXP_VISTA_X64\CC330.GPD
  WINXP_VISTA_X64\CC330L.GPD
  WINXP_VISTA_X64\GPCR64.INF
  WINXP_VISTA_X64\GPCR64.CAT
  WINXP_VISTA_X64\GPCR64.DLL
  WINXP_VISTA_X64\GPCRUI64.DLL
  WINXP_VISTA_X64\GPCRUI.CHM
  WINXP_VISTA_X64\GTCCRMON64.DLL
  WINXP_VISTA_X64\README.TXT

Required PC specifications
(The specication needs to be higher than recommended specification
 by using OS)

* OS             : Windows XP x64 Edition
                    (Proffesional)
                   Windows Vista x64 Edition
                    (Home Basic, Home Premium, Business, Ultimate)
                   Windows 7 x64 Edition
                    (Ultimate, Enterprise, Professional, Home Premium)
* CPU            : 1GHz 64-bit (x64) processor or faster
* Memory         : 512MB or larger
* Display        : 1024x768 True Color
* Mouse
* CD-ROM drive
* USB interface  : USB2.0(Full Speed)
Note:
 The interface which can be used depends on the plotter model.
 The plotter needs to be connected with either interface.

Precautions to be observed when connecting the Graphtec Craft ROBO
via USB.
   * Operation with other than the included driver is not guaranteed.
   * Do not connect multiple plotters to a single computer.
   * Operation is not guaranteed if the plotter is connected to a USB hub
     or to a USB extension board.

END

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.