NETATI24.INF Driver File Contents (2400v41.zip)

;; NETATI24.INF
;;
;; PCI Ethernet Network Interface Cards.
;;
;; Copyright 1995-1998,

[Version]
Signature="$CHICAGO$"
Class=Net
ClassGUID={4d36e972-e325-11ce-bfc1-08002be10318}
Provider=%V_Allied%

[Manufacturer]
%V_Allied%=Allied

[Allied]
%PCINT.DeviceDesc%=pcint.ndi,PCI\VEN_10EC&DEV_8029&SUBSYS_24001259

[SourceDisksNames]
52="Allied Telesyn AT-2400 CardAssistant Disk",,0

[SourceDisksFiles]
AT2400m.sys     =52,,AT2400m.sys,12345
netati24.inf    =52,,netati24.inf,1234
AT2400.dos      =52,,AT2400.dos,12345
AT24ODI.com     =52,,AT24ODI.com,12345

[pcint.ndi]
AddReg=pcint.ndi.reg,rtlrtp.ndi.reg,pci029.ndi.reg

;;****************************************************************************
;;    *ATI AT-2400 10Mb PCI (RTL8029)
;;****************************************************************************

[pcint.ndi.reg]
HKR,Ndi,DeviceID,0,"PCI\VEN_10EC&DEV_8029&SUBSYS_24001259"

HKR,Ndi\Install,,0,pcint.install
HKR,NDI\Params\DuplexMode,flag,1,30,00,00,00
;HKR,NDI\Params\EtherID,flag,1,30,00,00,00

HKR,Ndi\params\DuplexMode,ParamDesc,0,"Duplex Mode"
HKR,Ndi\params\DuplexMode,type,0,enum
HKR,Ndi\params\DuplexMode,default,0,0
HKR,Ndi\params\DuplexMode\enum,0,0,"Half Duplex (Default)"
HKR,Ndi\params\DuplexMode\enum,1,0,"Full Duplex"

HKR,NDI\Params\NetworkAddress,flag,1,30,00,00,00
HKR,Ndi\params\NetworkAddress,ParamDesc,0,"Network Address"
HKR,Ndi\params\NetworkAddress,type,0,edit
HKR,Ndi\params\NetworkAddress,default,0,"000000000000"
HKR,Ndi\params\NetworkAddress,LimitText,0,12
HKR,Ndi\params\NetworkAddress,UpperCase,0,1
HKR,Ndi\params\NetworkAddress,Optional,0,1

;HKR,Ndi\params\EtherID,ParamDesc,0,"Ethernet ID"
;HKR,Ndi\params\EtherID,type,0,edit
;HKR,Ndi\params\EtherID,default,0,"000000000000"
;HKR,Ndi\params\EtherID,LimitText,0,12
;HKR,Ndi\params\EtherID,UpperCase,0,1
;HKR,Ndi\params\EtherID,Optional,0,1

;;****************************************************************************
;;
;;****************************************************************************

[rtlrtp.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DriverDesc,0,"Allied Telesyn AT-2400 PCI Ethernet Adapter"
HKR,,DevLoader,0,*ndis
HKR,,DeviceVxDs,0,AT2400m.sys
HKR,,EnumPropPages,0,netdi.dll,EnumPropPages

; NDIS Info
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0a
HKR,NDIS,LogDriverName,0,"AT2400"
HKR,NDIS\NDIS2,DriverName,0,"AT2400$"
HKR,NDIS\NDIS2,FileName,0,"AT2400.dos"
HKR,NDIS\ODI,DriverName,0,"AT24ODI"
HKR,NDIS\ODI,FileName,0,"AT24ODI.com"

; Interfaces
HKR,Ndi\Interfaces,DefLower,0,"ethernet"
HKR,Ndi\Interfaces,LowerRange,0,"ethernet"
HKR,Ndi\Interfaces,DefUpper,0,"ndis2,ndis3"
HKR,Ndi\Interfaces,UpperRange,0,"ndis2,ndis3,odi"

; Install sections
HKR,Ndi\Install,ndis3,0,"rtlrtp.ndis3"
HKR,Ndi\Install,ndis2,0,rtlrtp.ndis2
HKR,Ndi\Install,odi,0,rtlrtp.odi

;;****************************************************************************
;; PCI common parameters
;;****************************************************************************

[pci029.ndi.reg]
;;params
HKR,,MediaType,0,1
HKR,,AdapterType,0,5
HKR,,BusType,0,5

;; Resources
HKR,,InterruptNumber,1,04,00,00,00
HKR,,IOBaseAddress,1,02,00,00,00
HKR,NDI\params\InterruptNumber,resc,1,04,00,00,00
HKR,Ndi\params\interruptNumber,ParamDesc,0,"Interrupt Level"
HKR,NDI\params\InterruptNumber,flag,1,20,00,00,00
HKR,NDI\params\IOBaseAddress,resc,1,02,00,00,00
HKR,NDI\params\IOBaseAddress,ParamDesc,0,"I/O Base Address"
HKR,NDI\params\IOBaseAddress,flag,1,20,00,00,00

;;ndis2
HKR,NDI\params\Interrupt,resc,1,04,00,00,00
HKR,Ndi\params\interrupt,ParamDesc,0,"Interrupt Level"
HKR,NDI\params\Interrupt,flag,1,10,00,00,00
HKR,NDI\params\IOBase,resc,1,02,00,00,00
HKR,NDI\params\IOBase,ParamDesc,0,"I/O Base Address"
HKR,NDI\params\IOBase,flag,1,10,00,00,00

;;****************************************************************************
;; Drivers
;;****************************************************************************

;; Install NDIS3
[rtlrtp.ndis3]
CopyFiles=rtlrtp.ndis3.CopyFiles,pcint.inf.CopyFiles
DelFiles=pcint.DelFiles

[rtlrtp.ndis3.CopyFiles]
AT2400m.sys,,,2

[pcint.inf.CopyFiles]
netati24.inf,,,2

[pcint.DelFiles]
netati24.inf,,,1
drvidx.bin,,,1
drvdata.bin,,,1

;;Install NDIS2
[rtlrtp.ndis2]
CopyFiles=rtlrtp.ndis2.CopyFiles

[rtlrtp.ndis2.CopyFiles]
AT2400.dos,,,2

;;Install ODI
[rtlrtp.odi]
CopyFiles=rtlrtp.odi.CopyFiles

[rtlrtp.odi.CopyFiles]
AT24ODI.com,,,2

;;****************************************************************************
;; Destination Directories
;;****************************************************************************
[DestinationDirs]
DefaultDestDir              =11 ; LDID_SYS
rtlrtp.ndis3.CopyFiles      =11
rtlrtp.ndis2.CopyFiles      =26 ; LDID_WINBOOT
rtlrtp.odi.CopyFiles        =26
pcint.inf.CopyFiles       =17 ; INF
pcint.DelFiles            =17

;;****************************************************************************
;; Localizable Strings
;;****************************************************************************
[strings]
;;Provider
V_MS="Microsoft"

;;Manufacturers
V_Allied="Allied Telesyn"

;;PCI Ethernet Devices
PCINT.DeviceDesc="Allied Telesyn AT-2400 PCI Ethernet Adapter"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.45