WANPIPE ANALOG TAPPING * Wed July 16 2008 ======================================================================== Enabling Tapping Mode Linux: -Add RM_MODE = RM_TAPPING in wanpipeX section of wanpipex.conf Windows: -In Device Manager->Sangoma Hardware Abstraction Driver (Analog)-> Analog Modules->Miscellenious Interface Options->FXO Tapping, set it to "On". Notes: - When line is unplugged, "Disconnect" event follows "Off-hook" event because Off-hook also means no battery on the line. Only handle "Disconnect" event in this situation. There is at least 5 seconds delay between these two events. - Connect/Disconnect events are only valid for FXO modulesDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.