1. CB_Router_144_100.zip Driver
2. A-rebuild-ACB144.txt File Contents

A-rebuild-ACB144.txt Driver File Contents (CB_Router_144_100.zip)

*******************************************************************************
Rebuild ACB_142: 2005.11.11 Jacy Hsu --> change source from ACB_143 to ACB_144
----------------------------------------------------------------------
Requirement: 1.remove mac filter funtion.


*******************************************************************************
Rebuild ACB_142: 2005.4.15 Jacy Hsu --> change source from ACB_141 to ACB_143
----------------------------------------------------------------------
Requirement: 1. Add Site survey funtion.
	     2. fix hwlan finish save funtion. (web key)

*******************************************************************************
Rebuild ACB_141: 2005.4.15 Jacy Hsu --> change source from ACB_141 to ACB_142
----------------------------------------------------------------------
Requirement: 1. Add MIB #22180.
	     2. SSID can use space.
	     3. upgrade don't Erase 0x1E8000(config)


*******************************************************************************
Rebuild ACB_141: 2004.09.08 Jeff Xing --> change source from ACB_140 to ACB_141
----------------------------------------------------------------------
Requirement: 1. Show origional WLAN Card MAC at console
	     2. Show system MAC address in web page system info
	     3. Delete "...click OK..." in web page: Software upgrade successful
	     4. [General Config / System] change host name, change (DHCP) to (DHCP Client).
             

1. \HARDWARE\HWLAN\Card.c --> 2131,2135:: remove /* & */, add dprintf("HWLAN:.....\n\n"); 
2. \HARDWARE\HWLAN\Cw10.c ---> 659~664:: add dprint ... & CardGetMACAddress before CardSetMACAddress
3. \OUTPUT\SOHO.C ---> delete 2084~2088:: show EEPROM MAC data
4. \AP\Cgi\Utiliy.c --> 16:: add #include "if.h",53:: if_Net  *ifp;,302~308:: show MAC address
5. \OUTPUT\Config.c --> 102:: change hostname
6. \AP\WWW\DOC\BCONFIG\RBBRIDGE.SHT & RBROUTER.SHT --> 28,35 change (DHCP) to (DHCP Client)
7. \AP\WWW\DOC\MESSAGE\Up_ok.htm --> 31: And now system restart......

*******************************************************************************
Rebuild ACB_140: 2004.09.02 Jeff Xing --> source from cb_138new.rar
----------------------------------------------------------------------
Requirement: 1. display link info in dbm
             2. Modify defauld Host Name & SSID
	     3. Defauld channel area should be USA.
	     4. MAC address on sticker should be match MAC address in software. 
             5. Transparent bridge with the option to disable or enable in web configuration.

Note: cb_138000.rar has a new feature: Transparent Bridge  mode selectable.
Note: cb_138new.rar has a modify about Transparent Bridge  mode selectable.	    

0. \setenv.bat :: Change path to c:\jobs.. & add make clean, make all, cd ap, mkfs www.
   \ETCPIP.DEF :: 144: _PRODUCT = 3, _PRODUCT_LOGO = 7

1. \AP\CGI\SSI_VARS.C :: 700: dB --> dBm, (int)lValue3 --> ((int)lVlave3 / 2)
   \AP\CGI\SSI_VARS.C :: 722: %d dB --> -%d dBm, (int)lValue4 --> (256 - (int)lValue4)
	(note: Link Quality ­È°£2, Signal Strengh­È´î256Åܦ¨­t­È¨ÃÅã¥Ü - xxx dBm)

2. \OUTPUT\Config.c :: 100~106,1245~1251: III_Config factory_default --> "HWLAN 1.40.701",
                           OPMODE_BRIDGE,   //Operation_Mode changed from OPMODE_ROUTER
3. \OUTPUT\Config.c ---> 1265: ,1 //AllowChannel 0:Card specify 1:USA(1-11) 2:Europe(1-13) 
                                //3:France(10-13) 4:Spain(10-11) 5:Japan(14) 6:All(1-14)
4. \HARDWARE\ARM\4510\SSMAC.C --> 615: Change MAC from "hwlan_adapter.PermanentAddress" to "rom"
   \HARDWARE\HWLAN\Cw10.c ---> 625, 658~664 GUCCI modify
   \KERNEL\IF.C --> 366,704: extern volatile U8 MyMacSrcAddr[6]; GetMyMacAddr();
   \OUTPUT\SOHO.C ---> 2084~2088:: show EEPROM MAC data	

5. \WWW\DOC\BCONFIG\MACFILTE.SHT -->13 : add ("ONLY" filter the Wireless Interface)
----
**************************************************************************
Arm Client Bridge - rebuild notes // Jeff Xing // 2004.05.27 //
==============================================
0. Code base on a copy of ArmCB_136800.

1. \ETCPIP.DEF line 144 ==> _PRODUCT_LOGO = 1

2. \output\configue.c line 79-81 ==> III_Config factory_default & _HTTPD server_admin
	"HWLAN CB136100",     //Version
    	
3. build: under dos change to target directory //setenv//make clean//make
   ==> cd AP //mkfs www//
4.img under \AP; .bin under \output

---
*********************************************************************************
End of file