Coolpix 700 firmware version 1.1 upgrade The principle improvements made with firmware upgrade software version 1.1 are described below. - With SENS. at the default setting of AUTO, the camera will automatically raise sensitivity by the approximate equivalent of one or two exposure stops to compensate when lighting is poor. - File-numbering (SEQ.XFER) settings now apply in both A-REC and M-REC modes. A SEQ.XFER option has been added to the A-REC menu to allow you to change these settings while the camera is in A-REC mode. - The brightness of the LCD monitor has been increased. Choosing a setting of "+" in the LCD BRIGHT menu not only increases the brightness of the backlight but also raises the overall brightness of image displayed on the monitor. - When the shutter speed is set to 1/4 sec. or slower, shutter speed will be displayed in the LCD monitor in yellow.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.