CAUTION with Windows98 :
Link Chip of TI is being supported with Windwos98 in the device driver
of standard loading.
However, it runs recklessly when a driver starts because Phy Chip isn't
being supported when it tries to drive PFW-41 in this driver.
So before attaching PFW-41,the procedure of the 2nd clause of the
installation process of a Windows 98 version PFW-41 driver becomes
necessary to prevent a standard device driver from loading.
It can't be assured as for the movement after that when a circuit board
is introduced without following the following process.
The installation process of a Windows 98 version PFW-41 driver:
1. Each file which is necessary for the installation of a Windows 98
version PFW-41 driver is in "\Setup98" and "\Setup98\Driver"
inside the CD-ROM.
2. Start "\Setup98\Setup" inside the CD-ROM.
Setup is a shortcut. A start is possible by double-clicking from
"Windows Explorer".
3. If it is completed, shut down Windows98.
4. Attach a PFW-41 circuit board to the slot of the computer.
5. Turn on the computer, and start Windows98.
6. A PFW-41 circuit board is recognized by PnP.
7. If it becomes the state of the choice of the device driver,
choose pfw.inf of "Setup98\Driver" inside the CD-ROM after
you choose "Have Disk".
8. Don't care, and continue the installation though warning is indicated.
9. Restart a computer, because the directions of "Restart" come out
when the installation of the driver is completed.
PFW-41 can be used with API which is the same as the Windows NT
version by the above operation.
PFW.DLL and CCM.DLL can be shared with the Windows NT version.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.