<What is Multi-Function Station ?> Panasonic Multi-Function Station software enables the unit to carry out the following functions: -Printing on plain paper, transparencies, labels and envelopes -Scanning documents and converting an image into text with Readiris OCR software -Scanning from other applications for Microsoft(R) Windows(R) that support TWAIN scanning -Storing, editing or erasing entries in directories using your computer -Programming the features using your computer -Sending, receiving fax documents using your computer <Hardware Requirements for Multi-Function Station> To use Multi-Function Station, the following hardware is required. Basic Software :Microsoft(R) Windows(R) 98/Me/2000/XP x86(32bit)/XP x64(64bit), Windows Vista(R) x86(32bit)/x64(64bit) and Windows 7 x86(32bit)/x64(64bit) CPU : Windows 98 Pentium(R) 90MHz or higher processor : Windows Me Pentium 150MHz or higher processor : Windows 2000 Pentium 166MHz or higher processor : Windows XP Pentium 300MHz or higher processor : Windows Vista Pentium 800MHz or higher processor : Windows 7 Pentium 1GHz or higher processor Memory Minimum : Windows 98 24MB (32MB or more is recommended) : Windows Me 32MB (64MB or more is recommended) : Windows 2000 64MB : Windows XP 128MB : Windows Vista 512MB : Windows 7 1GB Hard disk :More than 100MB available space Other : Panasonic KX-FLB800/FLM650 Series : USB or LAN interface (10BASE-T / 100BASE-TX) LAN is available in LAN interface models only. : CD-ROM drive <Installing Multi-Function Station> 1.Start Windows and exit all other applications. * For Windows 2000/XP/Vista/7 users, you must be logged in as an administrator in order to install Multi-Function Station. * If the unit is connected to a computer before installing Multi-Function Station, the [Found New Hardware Wizard] dialog box will appear. Click [Cancel] to close it. 2.Insert the included CD-ROM into your CD-ROM drive. * The [Choose Setup Language] dialog box will appear. Select the desired language that you want to use with this software from the drop-down list. Click [OK]. The installation will automatically start. * If the [Choose Setup Language] dialog box does not appear: The installation will automatically start. * If the installation does not start automatically: Click [Start]. Choose [Run...]. Type "D:\setup" (where "D:" is the drive letter of your CD-ROM drive). Click [OK]. (If you are not sure what the drive letter is for your CD-ROM drive, use Windows Explorer and look for the CD-ROM drive.) The installation will start. 3.After the setup program has started, follow the on-screen instructions. 4.After the [Setup Type] dialog box appeared, select the installing option. * If you select [Standard], Readiris OCR software and Device Monitor will also be installed. 5.After the [Connect Type] dialog box appeared, select the connecting option. USB: Connect the unit with the USB cable after the [Connect Device] dialog box appeared. * If the unit is connected to your computer, the model name will be automatically detected. Network (LAN interface models only): Select the unit in the LAN from the list. 6.Click [Install]. * The files will be copied to your computer. <Modifying the software> You can select the components to install or uninstall anytime after the installation. For Windows 2000/XP/Vista/7 users, you must be logged in as an administrator in order to modify Multi-Function Station. 1.Click [Start], then select [All Programs] or [Programs]->[Panasonic]->[KX-FLB800_FLM650 Series]->[Uninstall or Modify]. 2.Select [Modify] and click [Next]. 3.Select [Modify Utility] in the [Modify] dialog box, and click [Next]. 4.Select the check of the components you want to install. * If you want to uninstall the specific components, remove the check of them. 5.Click [Modify]. The modification starts. <Adding Printer Driver> -In case of adding a printer driver of the model which has been already installed. For Windows 2000/XP/Vista/7 users, you must be logged in as an administrator in order to modify Multi-Function Station. If you add printer driver by the USB connection, please execute the following instructions before you connect the unit. 1.Click [Start], then select [All Programs] or [Programs]->[Panasonic]->[KX-FLB800_FLM650 Series]->[Add Printer Driver]. 2.Follow the on-screen instructions at installation. -In case of adding a printer driver of the other KX-FLB800/FLM650 Series models. For Windows 2000/XP/Vista/7 users, you must be logged in as an administrator in order to modify Multi-Function Station. If you add printer driver by the USB connection, please execute the following instructions before you connect the unit. 1.Insert the included CD-ROM into your CD-ROM drive. The setup program will start. 2.Select [Modify] and click [Next]. 3.Select [Add Printer Driver] in the [Modify] dialog box, and click [Next], then follow the on-screen instructions. <Deleting Printer Driver> You can delete the printer only. For Windows 2000/XP/Vista/7 users, you must be logged in as an administrator in order to modify Multi-Function Station. 1.Click [Start], then select [All Programs] or [Programs]->[Panasonic]->[KX-FLB800_FLM650 Series]->[Uninstall or Modify]. 2.Select [Modify] and click [Next]. 3.Select [Delete Printer Driver] in the [Modify] dialog box, and click [Next]. 4.Select the printers you want to remove. 5.Click [Delete]. The deleting starts. Note: * You must leave at least one printer driver. If you want to delete all printer drivers, refer to the Uninstalling. <Updating Multi-Function Station> If you have a newer version of Multi-Function Station than installed one, you can update it. For Windows 2000/XP/Vista/7 users, you must be logged in as an administrator in order to modify Multi-Function Station. 1.Insert the CD-ROM into your CD-ROM drive. (When you have downloaded it from the support web page, double-click the [Setup] icon.) The setup program will start. 2.Select [Update] and click [Next], then follow the on-screen instructions. <Uninstalling Multi-Function Station> For Windows 2000/XP/Vista/7 users, you must be logged in as an administrator in order to uninstall Multi-Function Station. 1.Click [Start], then select [All Programs] or [Programs]->[Panasonic]->[KX-FLB800_FLM650 Series]->[Uninstall or Modify]. 2.Select [Uninstall] and click [Next], then follow the on-screen instructions. <Troubleshooting for installation/uninstallation> MfsCleaner is installation support tool. If you can not install or uninstall Multi-Function Station, please use it. For Windows 2000/XP/Vista/7 users, you must be logged in as an administrator in order to use MfsCleaner. 1.Insert the included CD-ROM into your CD-ROM drive. 2.When the setup program has started, click [Cancel], then click [Yes] to quit the setup. 3.Open the folder "D:\Tools\Uninstall". * Where "D:" is the drive letter of your CD-ROM drive. 4.Double-click [MfsCleaner] icon. * The [MfsCleaner for KX-FLB800/FLM650 Series] window will appear. 5.Click [Clean], and click [Yes]. * Your computer will restart. <Support> If you cannot solve your problems, please see following web site. http://panasonic.net/pcc/support/fax/usa/table/flb800_support.htm <Information> This setup program is not available to old Panasonic KX-FLM600/FLM650. Please see following web site in detail. http://panasonic.net/pcc/support/fax/world.htm Trademarks * Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. * Pentium is a registered trademark or trademark of Intel Corporation in the United States and/or other countries.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.