==========================================================================================
= =
= SUNIX PCI/PCI-104 I/O Board Driver Installation Guide =
= =
= For Windows CE 5.0 =
= =
= Version: 1.1.0.0 =
= Date: 2010/02/03 =
==========================================================================================
Item
A. Release note
B. Introduction
C. How to use SUNIX driver
C.1 Driver installation
C.2 Add driver into Platform Design
C.3 Change COM port number
D. Utility
D.1 snxdump
==========================================================================================
A. Release note
Support x86 base cpu only.
2008/12/16 - Ver:1.0.0.0
1) Release driver
2010/02/03 - Ver:1.1.0.0
1) Support golden / matrix / SUN1999 series
2) IPC-A1004 support IRQ sharing
3) Support PC-104/ISA series
------------------------------------------------------------------------------------------
B. Introduction
Maximum 1 boards can be installed, support SUNIX PCI/PCI-104/PC-104/PC-104 I/O Board as
list below.
1S -
4027T 4027A 4027AL 4027D 4027DL 4027P
5027A 5027AL 5027H 5027HL 5027P 5027PL
5027PH 5027PHL
2S -
4037T 4037A 4037AL 4037D 4037U 4037P
4037PL
8139 8139S 8139SI
P1002 P2002 B1002 B2002
4233A
5037A 5037H 5037AL 5037HL 5037P 5037PH
5037PL 5037PHL
4S -
4056A 4056A3 4056A4 4056AL 4056D 4056J
4056U 4056UE 4056P 4056PL 4056PM 4055WN
4056DW 4056AM 4056LM 4056LL 4056JM 4056LV
4000A 4000AL 4000P 4000PL
8159 8159S 8159SI
P1004 P2004 P3004 B1004 B2004
5056A 5056AL 5056H 5056HL 5056P 5056PL
5056PH 5056PHL 5056U 5056UL 5056UH 5056UHL
4243A
IPC-A1004
8S -
4066R 4066U 4066UE 4066WM 4066RM 4066JM
8000A 8000AL
8169 8169S 8169SI
P1008 P2008
5066A 5066H 5066AL 5066HL 5066U 5066UL
5066UH 5066UHL
------------------------------------------------------------------------------------------
C. Driver installation
C.1 Driver installation
step 1. please double click "SUNIX WinCE 5.0 Driver Vx.x.x.x.msi"
step 2. driver will install in C:\PLATFORM\Sunix_WinCE50\
step 3. finish driver install wizard
C.2 Add driver into Platform Design
step 1. create a new platform design
step 3. select a BSP
step 4. select a design templates
step 5. in "FileView", choice "Projects" and click mouse right button.
step 6. choice "Insert Existing Project..." and open snxcard.pbpxml in
C:\PLATFORM\Sunix_WinCE50\
step 7. use "Build and Sysgen" to build OS image.
C.2 Change COM port number
step 1. double click snxcard.reg file in "Parameter files" under "Projects"
step 2. change "Index" value to 1 ~ 9 to become COM1 ~ COM9,
please don't have a conflict with COM port number in
target device board.
------------------------------------------------------------------------------------------
D. Utility
D1. snxdump - dump port informations
step 1. please download or copy snxdump.exe (C:\PLATFORM\Sunix_WinCE50\App\)
to target device
step 2. execute snxdump.exe in target device
the informations should be like this
COM5 - port:1, iobase:xEF00, irq:10, sysintr:32
COM6 - port:2, iobase:xEF08, irq:10, sysintr:33
Total found 2 SUNIX Port
------------------------------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.