========================================================================================== = = = I/O Card Board Driver Installation Guide = = = = For DOS 6.22 = = Copyright 2009 SUNIX GROUP all right reserved = = Version: 1.00.000.002 = = Date: 2010/05/24 = ========================================================================================== Item A. Release note B. Remap Card Introduction C. CLK Relations D. Command List E. Example ========================================================================================== A. Release note Support DOS 6.22 on x86 machine only. 2010/05/24 - Ver:1.00.000.002 debug show onboard port set 2009/10/26 - Ver:1.00.000.001 updata matrix 1016 card 2009/12/31 - Ver:1.00.000.000 updata version ------------------------------------------------------------------------------------------ B. Remap Card Introduction PCI serial ports can support the remapping function 1 Serial Port - 4027D 2 Serial Port - 4037D 4 Serial Port - 4056D All PCI parallel ports are possible to be remapped to legacy I/O address (378h,278h) 2 Serial Port And 1 Parallel Port - 4079D 1 Parallel Port - 4008 PAR5008 2 Parallel Port - 4018 ------------------------------------------------------------------------------------------ C. PCI serial card are drived by a higher CLK (14.7456 Mhz), thus the actual baudarate is 8 times higher than the BIOS/DOS baudrate setting. The below table shows the relation. *** Clock=14.7456 Mhz for all non-remapable port *** Item Actual Baudrate BIOS/DOS setting Remark ===== ================ ================= ================== 1 921600 115200 2 460800 57600 3 230400 28800 Non BIOS standard 4 115200 14400 Non BIOS standard 5 57600 7200 Non BIOS standard 6 38400 4800 7 19200 2400 8 9600 1200 9 4800 600 Non BIOS standard 10 2400 300 11 1200 150 12 300 37.5 Non BIOS standard *** Clock=1.8432 Mhz for remapable port in DOS *** Item Actual Baudrate BIOS/DOS setting Remark ===== ================ ================= ================== 1 921600 Do not support 2 460800 Do not support 3 230400 Do not support 4 115200 115200 5 57600 57600 6 38400 38400 7 19200 19200 8 9600 9600 9 4800 4800 10 2400 2400 11 1200 1200 12 300 300 ------------------------------------------------------------------------------------------ D. Command List -help/-? Show help massages. -sc list card number for remaps and remapp use. -lpt Seting parallel mode to spp,ecp,epp,pff,bpp -force Designated address to lpt(com) number,login in the system. -remaps Remap address to available standard serial port address. -remapp Remap address to available standard parallel port address. ------------------------------------------------------------------------------------------ E. Example (4056D and 4008 Card Test) c:\>sundos -sc Sunix IO card Uti1ity for DOS ver.1.00.00.000 --------Search All Cards-------- 1:0048 Serial:4 Parallel:0 2:0058 Serial:0 parallel:1 c:\>sundos -remapp 2 278 Sunix IO card Uti1ity for DOS ver.1.00.00.000 Parallel Seting Address Parallel Port1 = 278H Extended Registers Address = 678H c:\>sundos -force 278 lpt2 Sunix IO card Uti1ity for DOS ver.1.00.00.000 Address 278H Seting To LPT2 c:\>sundos -lpt2=spp Sunix IO card Uti1ity for DOS ver.1.00.00.000 Seting LPT2 to spp c:\>sundos -remaps 1 3f8 2f8 3e8 2e8 Sunix IO card Uti1ity for DOS ver.1.00.00.000 4056D Seting Address Serial Port1 = 3f8H Serial Port2 = 2f8H Serial Port3 = 3e8H Serial Port4 = 2e8H c:\>sundos Sunix IO card Uti1ity for DOS ver.1.00.00.000 --------Sunix Card 4 Port Serial 0 Port Parallel-------- Serial Port 1 Base Addr = 3f8H IRQ=9 COM1 Serial Port 2 Base Addr = 2f8H IRQ=9 COM2 Serial Port 3 Base Addr = 3e8H IRQ=9 COM3 Serial Port 4 Base Addr = 2e8H IRQ=9 COM4 --------Sunix Card 0 Port Serial 1 Port Parallel-------- Parallel Port1 = 278H IRQ=11 LPT2 Extended Registers Address = 678H c:\> ------------------------------------------------------------------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.