[Version]
LayoutFile=layout.inf
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%MGCS%
[Manufacturer]
%MGCS% = MGCS
; models
[MGCS]
%Modem1% = MFP1, MDMPANAFAXCLASS2
%Modem2% = MFP1, MDMPANADP130
%Modem3% = MFP1, MDMPANADP150
%Modem4% = MFP1, MDMPANADP2000
%Modem5% = MFP1, MDMPANADP2500
%Modem6% = MFP1, MDMPANADP3000
%Modem7% = MFP1, MDMPANAUF490
%Modem8% = MFP1, MDMPANAUF525
%Modem9% = MFP1, MDMPANAUF590
%Modem10% = MFP1, MDMPANAUF790
%Modem11% = MFP1, MDMPANADP1810F
; Installation sections
; --------------------------------------------------------------
[MFP1]
AddReg = All, MfgAddReg, MFP1.AddReg
; Model specific AddReg sections
; --------------------------------------------------------------
[MFP1.AddReg]
HKR,, DeviceType, 1, 01 ; External
HKR,, Properties, 1, c0,01,00,00, ff,00,00,00, ff,00,00,00, 07,00,00,00, 0f,00,00,00, 77,03,00,00, 00,c2,01,00, 80,70,00,00
HKR,, FClass, 1, d7,00,00,00
HKR,, DCB, 1, 1c,00,00,00,00,e1,00,00,11,03,00,00,00,00,0a,00,0a,00,08,00,00,11,13,00,00,00,70,bf
HKR,, Default, 1, 3c,00,00,00,00,00,00,00,00,00,00,00,01,00,00,00,63,01,00,00
; User visible strings
; --------------------------------------------------------------
[Strings]
MGCS = "Matsushita Graphic Communication Systems, Inc."
Modem1 = "Panasonic Class 2 Fax Modem"
Modem2 = "Panasonic DP-135 Class 2 Fax Modem"
Modem3 = "Panasonic DP-150 Class 2 Fax Modem"
Modem4 = "Panasonic DP-2000 Class 2 Fax Modem"
Modem5 = "Panasonic DP-2500 Class 2 Fax Modem"
Modem6 = "Panasonic DP-3000 Class 2 Fax Modem"
Modem7 = "Panafax UF-490 Class 2 Fax Modem"
Modem8 = "Panafax UF-525 Class 2 Fax Modem"
Modem9 = "Panafax UF-590 Class 2 Fax Modem"
Modem10 = "Panafax UF-790 Class 2 Fax Modem"
Modem11 = "Panasonic DP-1810F Class 2 Fax Modem"
[All]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR, Init, 1,, "AT<cr>"
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
; The [MfgAddReg] section contains the first modem's Init,
; Settings, and Responses keys. It is installed for all
; modems in the INF. This eliminates duplication of common
; registry keys in the model registry sections, above.
[MfgAddReg]
HKR,, InactivityFormat,, "seconds"
HKR, Init, 2,, "AT&F<cr>"
HKR, Monitor, 1,, "None"
HKR, Hangup, 1,, "ATH<cr>"
HKR, Answer, 1,, "ATA<cr>"
HKR,, Reset,, "ATZ<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ";"
HKR, Settings, SpeakerVolume_Low,, "L0"
HKR, Settings, SpeakerVolume_Med,, "L2"
HKR, Settings, SpeakerVolume_High,, "L3"
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"
HKR, Settings, FlowControl_Off,, "&K0"
HKR, Settings, FlowControl_Hard,, "&K3"
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, Blind_On,, "X3"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, InactivityTimeout,, "S19=<#>"
HKR, Fax, Class1DTESpeed,, "AUTO"
HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "5<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR,Responses,"<cr><lf>BUSY<cr><lf>",1,06,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>ERROR<cr><lf>",1,03,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>NO ANSWER<cr><lf>",1,07,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>NO CARRIER<cr><lf>",1,04,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>NO DIAL TONE<cr><lf>",1,05,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>OK<cr><lf>",1,00,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>RING<cr><lf>",1,08,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>RINGING<cr><lf>",1,01,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>VOICE<cr><lf>",1,01,00,00,00,00,00,00,00,00,00
HKR,Responses,"<cr><lf>CONNECT<cr><lf>",1,02,00,00,00,00,00,00,00,00,00
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.