1. R230426.exe Driver
2. Setup_Dell_1.06.08.17_release.txt File Contents

Setup_Dell_1.06.08.17_release.txt Driver File Contents (R230426.exe)

_______________________________________________________________________________________________
Changes from 1.06.08.14/15/16
- Win 7, Vista, and XP 32/64 WHQLed
- GUI fix
- "verifier/standard/all" BSOD fix
- Experimental EM Unload (.15/.16 version) implementation, standard Unload is final
_______________________________________________________________________________________________
Changes from 1.06.08.13
- Win 7, Vista, and XP 32/64 WHQLed
- REV 14 target to all ODMs
_______________________________________________________________________________________________
Changes from 1.06.08.12
- New registry for 20msec duration setting
- GUI fix
- TEST DRIVER ... NOT FOR ALL ODMS
_______________________________________________________________________________________________
Changes from 1.06.08.11
- New service to add filter on 2nd HDD and prompt for reboot if needed. 
  has been tested on Vista32 and Win7 32 bit OSes. 
- GUI to meet Dell requirement
- Registry entry for AW
- Test driver so that it loads on all Intel PCHs with PID 0x3BXX.

!THIS DRIVER RELEASE IS UNSIGNED!
To run on Vista64 or Win7 64 OS, use two methods below:
1. press F8 at boot to disable signing check
2. enable loading of test signed sw as follows:
   - From Administrator command prompt run
   - "bcdedit /set testsigning on"
   - reboot
_______________________________________________________________________________________________
Changes from 1.06.08.10
- Win 7 and XP 32/64 WHQLed
_______________________________________________________________________________________________
Changes from 1.06.08.09
- Fix WHQL DTM issue
_______________________________________________________________________________________________
Changes from 1.06.08.08
- Vista 32/64 driver WHQLed
_______________________________________________________________________________________________
Changes from 1.06.08.07
- GUI and language change
- New control panel icon
- update registry
_______________________________________________________________________________________________
Changes from 1.06.08.06
- Registry change, no driver change
_______________________________________________________________________________________________
Changes from 1.06.08.05
- Registry change, no driver change
_______________________________________________________________________________________________
Changes from 1.06.08.04
- Test release
_______________________________________________________________________________________________
Changes from 1.06.08.03
- GUI apps S3, S4, Power Down resume behavior (keep OK and Cancel option)
- Free fall interrupt setting 400Hz, 4 samples, threshold 0x17
- Un-safe motion detection setting 400Hz, 15 samples, threshold 0x14
- GUI apps registry control
- Setup_AW... (for Alienware GUI)
- Setup_Dell... (for Dell GUI)
_______________________________________________________________________________________________
Changes from 1.06.08.02
- Support Capella/IbexPeak PCH
- GUI apps (remove accept)
- HDD protection default to interrupt mode (registry setting)
- Add AW GUI

_______________________________________________________________________________________________
Changes from 1.06.08.01

- setup executable (supports XP/Vista/Win7)
	- as single package end user mode
	- /nodrv factory installation, install filter and GUI
	- /s silent installation mode
- Sensor driver (for factory installation)
  x86 directory: 32-bit accelerometer driver binaries
  x64 directory: 64-bit accelerometer driver binaries

Notes:
1) While testing silent installation, the unsigned driver warnings is expected
   - Will be resolved when the drivers get WHQLed.
2) Press F8 while booting 64-bit OS and disable unsigned driver check each time boot
   - Otherwise the machine will blue screen while booting.  Will be resolved after WHQLed.
3) CPL file is not installed on 64-bit systems
   - Only 32-bit OS installation with GUI in Control Panel.