Defaults.ini Driver File Contents (DELL_1135-MONO-LASER-MFP_A01_R299037.exe)

[ColorManagement]
ColorMatchingEnabled=1;		UINT		Is Color Matching enabled (0-no, 1-yes)
ColorMatchingProfile=Dell 1135n Laser MFP.icc;	STRING		Scanner Color Profile Filename
ColorMatchingShowPage=1;		UINT		Show Color Matching Page (0-no, 1-yes)
HistogramShowPage=1;		UINT		Show Histogram Page (0-no, 1-yes)

[PlugNPlay]
FullProductName=Dell 1135n Laser MFP;	STRING	TWAIN Identity
Manufacturer=Dell;		STRING		TWAIN Identity
PID=0x5318;			STRING		Product ID as a hexadecimal number
ProductFamily=Dell Laser MFP;	STRING		TWAIN Identity
ShortProductName=1135n Laser MFP;	STRING		PnP string
VID=0x413C;			STRING		Vendor ID as a hexadecimal number

[Special]
DeviceSelect=4 ; 			UINT		Value of device selection for Device Monitor

[Timeouts]

[UI]	
ColorModeUIDefault=TrueColor;	STRING		Color mode (image composition) selected by default in UI
ColorModeUIRange=TrueColor,Color256,Gray256,LineArt,Halftone;	STRING		Range shown in the Color Mode combo box
DocSourceUIDefault=Auto;		STRING		Document source (tray) selected by default in UI
MinADFX=6720;			UINT		Minimum ADF width, BU (should be 0 on Flatbed-only scanners)
MinADFY=6960;			UINT		Minimum ADF length, BU(should be 0 on Flatbed-only scanners)
MinSelectionX=128;		UINT		Minimum selection width, BU
MinSelectionY=128;		UINT		Minimum selection length, BU
ResolutionUIDefault=300;		STRING		Resolution selected by default in UI, dpi
ResolutionUIRange=75,100,150,200,300,600,1200,2400,4800;	STRING		Range shown in UI Resolutions combo box (unless the application reduces the range), dpi
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.17