823xlan/NICSET/WinSetup/NTSetup.inf Driver File Contents (823xlan.zip)

Driver Package File Name: 823xlan.zip
File Size: 3.5 MB

[StfVariableDetect]
    !STF_PROCESSOR = "" ? $(!LIBHANDLE) GetProcessor
    !STF_PLATFORM  = "I386"        
    !STF_LANGUAGE   = "" ? $(!LIBHANDLE) GetLanguage
    LanguageList   = ^(LanguageID, 1)
    !STF_WINDOWSPATH    = "" ? $(!LIBHANDLE) GetWindowsNtDir
    !STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir
    !STF_NTPATH         = $(!STF_WINDOWSPATH)
    !STF_COMPUTERNAME   = "" ? $(!LIBHANDLE) GetMyComputerName
    !STF_BUSTYPE        = "" ? $(!LIBHANDLE) GetMyBusType
    !STF_BUSTYPELIST    = "" ? $(!LIBHANDLE) GetMyBusTypeList
[StfVariableSyms]
    !ProcessorID_I386  = I386
    !ProcessorID_I486  = I486
    !ProcessorID_I586  = I586
    !ProcessorID_R4000 = R4000
    !ProcessorID_Alpha = Alpha_AXP
    !ProcessorID_PPC601  = PPC601
    !ProcessorID_PPC603  = PPC603
    !ProcessorID_PPC604  = PPC604
    !ProcessorID_PPC620  = PPC620
    !PlatformID_I386   = I386
    !PlatformID_Mips   = Mips
    !PlatformID_Alpha  = Alpha
    !PlatformID_PPC    = ppc
    !STF_PRODUCT        = WINNT    
    !STF_USERNAME       = ""       
    !STF_INSTALL_MODE   = "CUSTOM" 
    !STF_UPDGRADE       = NO       
    !STF_NCDETECT       = NO       
    !STF_NCOPTION       = ""       
    !STF_NCDETCARD      = 99999    
    !STF_NCDETINFO      = {}       
    !STF_NC_PARAMS      = {}       
    !STF_NC_PNAMES      = {}       
    !STF_SRCDIR_KEYED   = ""       
    !STF_SRCDIR_USED    = ""       
    !STF_SRCDIR_OVERRIDE = ""      
    !STF_SRCDIR_WINNT   = ""       
    !STF_TEMPLATE_CRITERR = "CRITERR2"
    !STF_TEMPLATE_NONCRITERR = "NONCRITERR2"
    !STF_INSTALLED_OS = {} ? $(!LIBHANDLE) GetInstalledOSNames
    FatalErrorIndex = 1
    Exit_Code = 0


[DoAskOemsetupSource]
    read-syms DoAskUpgradeSrcDlgText$(!STF_LANGUAGE)
    shell "subroutn.inf" DoAskSourceEx $($0) $(DlgText)
    Return $($R0) $($R1) $($R2) $($R3)
[Shell Commands]
     set-title "Windows NT Setup"
     Set !G:DebugOutputControl = 0
     LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE
     Set !NCPA_HANDLE = ""
     Ifstr(i) $(!NTN_InfSection) != OemSoftwareInstall
	 Debug-Output "NCPASHEL.INF: LoadLibrary on "$(!STF_CWDDIR)ncpa.cpl
	 LoadLibrary "y" $(!STF_CWDDIR)ncpa.cpl !NCPA_HANDLE
     Endif
     Shell "subroutn.inf" ReadSetupHelpIds
     SetHelpFile "NetCfg.hlp" $(!MinimumID) $(!MaximumID)
     set-subst LF = "\n"
     StartWait
     read-syms StfVariableSyms
     read-syms StfVariableDetect
     detect StfVariableDetect
     Set !STF_NTPATH = $(!STF_WINDOWSSYSPATH)
     OpenRegKey $(!REG_H_LOCAL) "" "System\CurrentControlSet\Control\ProductOptions" 33554432 KeyProductOption
     ifstr(i) $(KeyProductOption) != ""
	 GetRegValue $(KeyProductOption) "ProductType" ProductTypeList
	 set TempProductType = *($(ProductTypeList),4)
	 ifstr(i) $(TempProductType) == "winnt"
	     set !STF_PRODUCT = WINNT
	 else-ifstr(i) $(TempProductType) == "lanmannt"
	     set !STF_PRODUCT = LANMANNT
	 else-ifstr(i) $(TempProductType) == "servernt"
	     set !STF_PRODUCT = SERVERNT
	 endif
	 CloseRegKey $(KeyProductOptions)
     endif
     Debug-Output "NCPASHEL.INF: STF_SRCDIR is "$(!STF_SRCDIR)
     Debug-Output "NCPASHEL.INF: NTN_SRCPATH is "$(!NTN_SRCPATH)
     ;Ifstr(i) $(!NTN_SRCPATH) != ""
     ;    Set !STF_ORIGINAL_SRCDIR = $(!STF_SRCDIR)
     ;    Set !STF_SRCDIR = $(!NTN_SRCPATH)
     ;    Debug-Output "NCPASHEL.INF: Reset STF_SRCDIR to:"$(!STF_SRCDIR)
     ;else
	 OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
	 Ifstr(i) $(KeyNt) != ""
	     GetRegValue $(KeyNt) "SourcePath" SourcePathValue
	     Set !STF_SRCDIR = *($(SourcePathValue),4)
	     Debug-Output "NCPASHEL.INF: SourcePath retrieved is "$(!STF_SRCDIR)
	     CloseRegKey $(KeyNt)
	 Endif
	 Ifstr(i) $(!STF_SRCDIR) == ""
	   Set !STF_SRCDIR = "A:\"
	 Endif
     ;Endif
     Set SetupInp = 0
     Set !NTN_InstallPhase = secondary
     ifstr(i) $(!NTN_OVERIDEPHASE) != ""
	 Set !NTN_InstallPhase = $(!NTN_OVERIDEPHASE)
     Else
	 OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\Setup" $(!REG_KEY_READ) KeySetup
	 Ifstr(i) $(KeySetup) != ""
	     GetRegValue $(KeySetup) "SystemSetupInProgress" SetupInpValue
	     Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
		 Set SetupInp = *($(SetupInpValue),4)
		 Debug-Output "NCPASHEL.INF: SetupInp = "$(SetupInp)
	     Endif
	     Ifint $(SetupInp) == 1
		 Set !NTN_InstallPhase = primary
		 GetRegValue $(KeySetup) "WinntPath" SetupPathValue
		 Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
		     Set !STF_SRCDIR_WINNT = *($(SetupPathValue),4)
		     Debug-Output "NCPASHEL.INF: STF_SRCDIR_WINNT = "$(!STF_SRCDIR_WINNT)
		 Endif
	     Endif
	     CloseRegKey $(KeySetup)
	 Endif
     EndIf
     Debug-Output "NCPASHEL.INF: NTN_InstallPhase = "$(!NTN_InstallPhase)
     Debug-Output "NCPASHEL.INF: NTN_InfSection = "$(!NTN_InfSection)
     Debug-Output "NCPASHEL.INF: NTN_InstallMode = "$(!NTN_InstallMode)
   ;Ifstr(i) $(!NTN_Origination) == "install"
   ;     Goto skipdetection
   ;Endif
   Ifstr(i) $(!NTN_InfSection) == BindingsReview
	Goto skipdetection
   Endif
   Ifstr(i) $(!NTN_InstallMode) == install
	Goto startdetection
   Endif
   Ifstr(i) $(!NTN_InstallMode) == configure
	Goto startdetection
   Endif
   Goto skipdetection
startdetection = +
   Ifstr(i) $(!NCPA_HANDLE) != ""
       Debug-Output "NCPASHEL.INF: Enable netcard detection from NCPA.CPL"
       Shell "NCPARAM.INF" Param_ControlDetection DTSTART
   Endif
skipdetection = +
     ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_I386)
	 set !STF_PLATFORM = $(!PlatformID_I386)
	 set !SYS      = $(!ProcessorID_I386)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_I486)
	 set !STF_PLATFORM = $(!PlatformID_I386)
	 set !SYS      = $(!ProcessorID_I386)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_I586)
	 set !STF_PLATFORM = $(!PlatformID_I386)
	 set !SYS      = $(!ProcessorID_I386)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_R4000)
	 set !STF_PLATFORM = $(!PlatformID_Mips)
	 set !SYS      = $(!ProcessorID_R4000)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_Alpha)
	 set !STF_PLATFORM = $(!PlatformID_Alpha)
	 set !SYS      = $(!ProcessorID_Alpha)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC601)
	 set !STF_PLATFORM = $(!PlatformID_PPC)
	 set !SYS      = $(!ProcessorID_PPC601)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC603)
	 set !STF_PLATFORM = $(!PlatformID_PPC)
	 set !SYS      = $(!ProcessorID_PPC603)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC604)
	 set !STF_PLATFORM = $(!PlatformID_PPC)
	 set !SYS      = $(!ProcessorID_PPC604)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC620)
	 set !STF_PLATFORM = $(!PlatformID_PPC)
	 set !SYS      = $(!ProcessorID_PPC620)
     else
	 set !STF_PLATFORM = $(!PlatformID_I386)
	 set !SYS      = $(!ProcessorID_I386)
     endif
     Ifstr(i) $(!STF_LANGUAGE) != "ENG"    
	 Debug-Output "NCPASHEL: Language not set to English; resetting"
	 !STF_LANGUAGE = "ENG"
     Endif
     read-syms ProgressCopy$(!STF_LANGUAGE)
    Ifstr(i) $(!NTN_RegBase) == ""
	set !NTN_RegBase = ""
    Endif
    set !NTN_ServiceBase  = "SYSTEM\CurrentControlSet\SERVICES"
    Ifstr(i) $(!NTN_InstallMode) == ""
	Debug-Output "NCPASHEL:!NTN_InstallMode was not defined!"
	set !NTN_InstallMode  = "configure"
    Endif
    Ifstr(i) $(!NTN_SoftwareBase) == ""
	set !NTN_SoftwareBase = "SOFTWARE"
    Endif
    Ifstr(i) $(!NTN_Origination) == ""
	set !NTN_Origination = "ncpa"
    Endif
    Ifstr(i) $(!NTN_Infname) == ""
	goto fatalnoinfname
    Endif
    Ifstr(i) $(!NTN_InfSection) == ""
	Set !NTN_InfSection = "InstallOption"
    Endif
    ifstr(i) $(!NTN_InstallMode) == "Update"
	;Debug-Output "NCPASHEL.INF: Upgrade mode"
	;Shell "" DoAskOemsetupSource $(!STF_SRCDIR)
	;Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
	;    goto shellerror
	;Endif
	;ifstr(i) $($R0) == STATUS_SUCCESSFUL
	;    set !STF_SRCDIR = $($R1)
	;else-ifstr(i) $($R0) == STATUS_USERCANCEL
	;    set Exit_Code = 1
	;    goto end
	;else
	;    set Exit_Code = 2
	;    goto end
	;endif
	Set !NTN_Infname = $(!STF_SRCDIR)\oemsetup.inf
    endif
    Ifstr(i) $(!NTN_InstallMode) == install
	set AddCopy  = YES
	set DoCopy   = YES
	set DoConfig = YES
    Else-ifstr(i) $(!NTN_InstallMode) == "Update"
	set AddCopy  = YES
	set DoCopy   = YES
	set DoConfig = NO
	Debug-Output "NCPASHEL.INF: Shell to "$(!NTN_Infname)
	Shell $(!NTN_Infname) ReturnOptions $(!STF_LANGUAGE)
	Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
	   Debug-Output "NCPASHEL.INF: SHELL ERROR: "$($ShellCode)
	   goto shellerror
	Endif
	Ifstr(i) $($R0) == "STATUS_SUCCESSFUL"
	   IfContains(i) $(!NTN_InfOption) in $($R1)
	      goto ContinueUpgrade
	   endif
	endif
	read-syms IncorrectOemsetupDisk$(!STF_LANGUAGE)
	shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(ErrorText)
	set Exit_Code = 1
	goto end
ContinueUpgrade = +
    Endif
    ifstr(i) $(!NTN_SRCPATH) != ""
	Set !STF_SRCDIR_OVERRIDE = $(!STF_SRCDIR)
    Endif
;    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Tcpip\CurrentVersion" $(!REG_KEY_READ) KeyProduct
    ifstr(i) $(KeyProduct) == ""
	Shell "oemnxptc.inf" $(!NTN_InfSection) +
		$(!STF_LANGUAGE) TC +
		$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig) 
    endif
    CloseRegKey $(KeyProduct)
;    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\LanmanServer\CurrentVersion" $(!REG_KEY_READ) KeyProduct
    ifstr(i) $(KeyProduct) == ""
	Shell "oemnsvsv.inf" $(!NTN_InfSection) +
		$(!STF_LANGUAGE) SRV +
		$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig)    
	
    endif
    CloseRegKey $(KeyProduct)

;    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\LanmanWorkstation\CurrentVersion" $(!REG_KEY_READ) KeyProduct
    ifstr(i) $(KeyProduct) == ""
	Shell "oemnsvwk.inf" $(!NTN_InfSection) +
		$(!STF_LANGUAGE) WKSTA +
		$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig) 

	OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\NetLogon" $(!REG_KEY_WRITE) KeyStart
	SetRegValue $(KeyStart) {"Start", 0, $(!REG_VT_DWORD),3}
	CloseRegKey $(KeyStart)

    endif
    CloseRegKey $(KeyProduct)

;    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\NetBios\CurrentVersion" $(!REG_KEY_READ) KeyProduct
    ifstr(i) $(KeyProduct) == ""
	Shell "oemnsvnb.inf" $(!NTN_InfSection) +
		$(!STF_LANGUAGE) NETBIOS +
		$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig)    
	
    endif
    CloseRegKey $(KeyProduct)

;    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\RPCLOCATOR\CurrentVersion" $(!REG_KEY_READ) KeyProduct
    ifstr(i) $(KeyProduct) == ""
	Shell "oemnsvrp.inf" $(!NTN_InfSection) +
		$(!STF_LANGUAGE) RPCLOCATE +
		$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig)    
	
    endif
    CloseRegKey $(KeyProduct)

    Set !STF_SRCDIR_OVERRIDE = $(!NTN_SRCPATH)
    Set !STF_SRCDIR = $(!NTN_SRCPATH)

    Shell $(!NTN_Infname) $(!NTN_InfSection) +
	 $(!STF_LANGUAGE) $(!NTN_InfOption) +
	 $(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig)    
    Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
       Debug-Output "NCPASHEL.INF: SHELL ERROR: "$($ShellCode)
       goto shellerror
    Endif
    Debug-Output "NCPASHEL: INF return: "$($R0)
    
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
	set Exit_Code = 0
	ifstr(i) $(!NTN_InstallMode) == install            
	    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\Tcpip\Parameters" $(!REG_KEY_WRITE) ParametersKey
	    SetRegValue $(ParametersKey) {"EnableDHCP", 0, $(!REG_VT_DWORD),1}
	    CloseRegKey $(ParametersKey)
	    Shell "", INSTALL-INF
	Endif
	LibraryProcedure StartResult $(!NCPA_HANDLE), CPlSetup $(!STF_HWND), NCPA
	
    else-ifstr(i) $($R0) == STATUS_USERCANCEL
	set Exit_Code = 1
    else-ifstr(i) $($R0) == STATUS_NO_EFFECT
	set Exit_Code = 3
    else-ifstr(i) $($R0) == STATUS_REBIND
	set Exit_Code = 4
    else-ifstr(i) $($R0) == STATUS_REBOOT
	set Exit_Code = 5
    else
	set Exit_Code = 2
    Endif
    EndWait    
    goto end
shellerror = +
   read-syms ShellError$(!$ShellCode)$(!STF_LANGUAGE)
   Debug-Output "NCPASHEL: SHELL ERROR: "$(Error)
   goto fatal
fatalnoinfname = +
   set FatalErrorIndex = 2
   goto fatalmsg
fatalmsg = +
   read-syms FatalError$(FatalErrorIndex)$(!STF_LANGUAGE)
   Debug-Output "NCPASHEL: FATAL ERROR: "$(Error)
   goto fatal
fatal = +
   read-syms FatalDlg$(!STF_LANGUAGE)
   ui start "FatalError"
   goto end
end = +
   Ifstr(i) $(!LIBHANDLE) != ""
       LibraryProcedure DontCare, $(!LIBHANDLE), DeleteAllConnections
   Endif
   Debug-Output "NCPASHEL: NCPASHEL: returning to NCPA"
   goto term
term = +
   Debug-Output "NCPASHEL: Bye."
   exit   
   
[Install-INF]        
    Set Prefix = "oemnad"
    Set Index = 0    
NextFile = +    
    LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)\$(Prefix)$(Index).inf
    Ifstr(i) $(STATUS) == "YES"
	Set-add Index = $(Index),1
	goto    NextFile
    Endif
    
    Set InfName = $(Prefix)$(Index).inf

    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\NCPA" $(!REG_KEY_WRITE) KeyNt
    SetRegValue $(KeyNt), {InfReturn, 0, $(!REG_VT_SZ), $(InfName)","$(!STF_SRCDIR)","$(!NTN_InfOption)",D-Link PCI Fast Ethernet Network Adapter(s)"}
    CloseRegKey $(KeyNt)
	
    Set Index = 1    
NextCard = +
    Ifint $(Index) < 10                
	OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(Index) $(!REG_KEY_READ) KeyNt
	Ifstr(i) $(KeyNt) != $(KeyNull)                        
	    GetRegValue $(KeyNt) "ProductName" ProductName
	    Ifstr(i) *($(ProductName),4) == "FETNDIS"                
		OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(Index)"\NetRules" $(!REG_KEY_WRITE) KeyNetRules
		SetRegValue $(KeyNetRules) , {InfName , 0,$(!REG_VT_SZ), $(InfName)}
		CloseRegKey $(KeyNetRules)
	    Endif
	    CloseRegKey $(KeyNt)
	Endif        
	Set-add Index = $(Index), 1 
	goto NextCard
    Endif    
    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\D-Link\FETNDIS\CurrentVersion\NetRules" $(!REG_KEY_WRITE) KeyNt    
    SetRegValue $(KeyNt), {Infname, 0, $(!REG_VT_SZ), $(InfName)}    
    CloseRegKey $(KeyNt)

    LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(!STF_SRCDIR)\oemsetup.inf $(!STF_WINDOWSSYSPATH)\$(InfName)
    Return 0
[Source Media Descriptions]
    1 = "Windows NT Workstation CD-ROM" , TAGFILE = cdrom_w.40
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
2,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[LanguageID]
   ENG
[LanguageTextENG]
   "English (United States)"
[ProgressCopyENG]
    ProCaption   = "Windows NT Networking Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correctly installed.  Are you sure you want "+
		   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"
    PlatformID_I386 = I386
    PlatformID_Mips = Mips
    PlatformID_PPC  = ppc
[FatalDlgENG]
STF_MB_TITLE = "Setup Message"
DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 3
STF_MB_DEF   = 1
[FatalError1ENG]
Error = "Initialization failed"
[FatalError2ENG]
Error = "No INF file name given (NTN_Infname)"
[FatalError3ENG]
Error = "Invocation of INF file "$(!NTN_Infname)" failed"
[ShellError1ENG]
Error = "INF file "$(!NTN_Infname)" does not exist"
[ShellError2ENG]
Error = "INF file "$(!NTN_Infname)" does not have a section named "$(!NTN_InfSection)
[ShellError3ENG]
Error = "INF file "$(!NTN_Infname)", section "$(!NTN_InfSection)" has syntax errors"
[DoAskUpgradeSrcDlgTextENG]
    DlgText        = "Please enter the full path for the upgrade/update "+
		     "OEMSETUP.INF file. Then choose Continue."
[IncorrectOemsetupDiskENG]
    ErrorText      = "Update aborted. The OEMSETUP.INF does not support upgrade for the specified component."
server: web1, load: 1.21