W7_7022_release.txt Driver File Contents (R272974.exe)

 Realtek Confidential, 2010/6/22

------------------------------------------------

Realtek 8136/8168/8169 PCI/PCIe NDIS6.20 driver (for Windows 7)

Updated driver : Please visit www.Realtek.com

------------------------------------------------
Version 7.022.0615.2010

1.Update RTL8103E parameters.

2.Update RTL8105E-VC parameters. (Crystal power saving is inactive.)
  Fix sometimes, lan can't receive packets after OS boot.
  Fix sometimes, lan fail detect cable plug.

3.Fix S1 WOL fail issue that cause by 7.020 RCR adjusting.

------------------------------------------------
Version 7.021.0531.2010

1.Fix RTL8110SC HP CDM Wakeup pattern R/W test fail issue.

2.Reduce CPU utilization.

3.Fix RTL8401 packet loss issue if new card reader driver of ADMA mode is used.

4.Add support for RTL8105E-VC.

5.PCI Gigabit Ethernet Controller final version Windows 7 driver. (RTL8110S-32, RTL8110SB, RTL8110SC)

------------------------------------------------
Version 7.020.0503.2010

1.Fix system BSOD 0xC4 issue while testing system DTM on some platform.

2.When "ForceMode" is enabled, "EEE" will be disabled (EEE require nway capability).

3.Adjust RCR before entering to S3/S4/S5 to prevent unexpected PME event.

------------------------------------------------
Version 7.019.0409.2010

1.Remove RTL8111E DSMv2 parameters. (8111E don't support DSMv2.)

2.Fix RTL8111D jumboframe peformance issue.

3.Fine tune RTL8111E ASPM setting to improve performance on some platform. (ASPM Entry)

4.Update RTL8111E GPHY code to fix some 10M dumb hub packet lost issue.

------------------------------------------------
Version 7.018.0322.2010

1.Fix dump RTL8111E Asf Reg fail issue.

2.Fix dmup pci nic pci configuration fail issue.

3.Fine tune RTL8111E-VB power consumption.

4.Fix RTL8103E DSMv2 cause lan disappear on CLKREQ enabled platform, even cable is pluged.

------------------------------------------------
Version 7.017.0304.2010

1.Update 8105E-VB PHY parameters.

2.Update 8111E-VB PHY parameters. Power saving feature is active.

------------------------------------------------
Version 7.016.0226.2010

1.Fix 8111DP Dash Client tool access fail.

2.Fix AutoDiableGigabit function (AC Mode) Fail. 

------------------------------------------------
Version 7.015.0209.2010

1.Add support disable HwIoErr Lock.

2.Add support dump phy ram code.

3.For 8111E-VB, Power saving feature is inactive.

------------------------------------------------
Version 7.014.0128.2010

1.Write back default MacAddress during driver unload.

2.For 8168D, Update EPHY parameters for Capella platform (latest PG tool needed) to improve TX throughput.

3.Update RTL8103E-VB CLKREQ parameters.

------------------------------------------------
Version 7.013.0112.2010

1.Add support for RTL8105E-VB.

2.Add support for RTL8111E-VB.

3.Update RTNUninst.dll to 1.0.0.5.

------------------------------------------------
Version 7.012.1218.2009

1.Fix IP loss issue ( No link on tray icon but PHY is linked up ).

------------------------------------------------
Version 7.011.1127.2009

1.Support BIOS Control WOL Capability.
  When BIOS set WOL disable, LAN Power management will grey out.
  Please refer to Realtek BIOS WOL programming guide.
  (specific Customer requirement)

2.logging disconnect event to event viewer default set to off. Use InstCtrl.txt with "LogDisconnectEvent to 1" to enable.

------------------------------------------------
Version 7.010.1117.2009

1.Update RTNUninst.dll.

2.Improve DSMv2 compatibility.

------------------------------------------------
Version 7.009.1105.2009

1.Fix VLC network player UDP issue after client system resumed from sleep.

------------------------------------------------
Version 7.008.1023.2009

1.Fix BSOD 0x000000C4 DTM issue If Virtual PC Network filter driver is installed.

2.Fix DSMv2 may cause BSOD 0x000009F issue.

3.Fix RTL8168DP Tx may become abnormal after system reboot.

------------------------------------------------
Version 7.007.1002.2009

1.For RTL8168DP, Remove "Green Etherent" from advanced setting.

2.For RTL8168DP Remove "AutoDisablePcie" and "AutoDisablePhy" from advanced setting.

3.Fix RTL8168D Vlan issue.

4.Update RTL8102E Phy parameters.

5.Change Windows 7 Inf and catalog filename.

6.For RTL8169 series, enable tx and rx before loopback test.

7.Fix BIOS may not disable DSMv2 issue.

------------------------------------------------

Version 7.006.0820.2009

1.Update RTL8168D Phy parameters.

2.Fix Diagnostic Lan Function Test fail issue.

3.Improve DSMv2 compatibility.

4.Fix BSOD 0x000000E6 while running System DTM.

------------------------------------------------

Version 7.005.0730.2009

1.Update RTUninstall.dll.

2.Fix hardware malfunction BSOD issue on few platform.  

3.Fix system hang issue when DSMv2 is enabled.

------------------------------------------------

Version 7.004.0713.2009

1.Add support for RTNUninst.

2.Fix link fail with 10Mbps hub, when SpeedDuplex is set to 100Mbps.

3.Fix RTL8102E/RTL8103E Device Missing with some platform when system state is changed from Sx to S0.

4.Fix compatibility issue with anti-virus NDIS filter driver.

5.Add logging disconnect event to event viewer.

6.Fix Green Ethernet function error when system is changed from sleep state to S0.

7.Reduce the number of times OS halts driver to decrease the lan disable time.

8.Reduce the number of times OS initializes driver to decrease the driver loading time.

------------------------------------------------

Version 7,003,0522,2009

1. First release for windows 7.
2. Support 8103E(L) VerB.

------------------------------------------------


Celeron is a Intel trademark
Nvidia is a nVidia trademark
Installshiled 2009 is a Macrovision trademark
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.60