1. STEC_MULTI-DEVICE_A00_R289824.exe Driver
2. README_win.txt File Contents

README_win.txt Driver File Contents (STEC_MULTI-DEVICE_A00_R289824.exe)

######################################################################

README.txt for SSDUpgrade.exe

######################################################################

SSDUpgrade.exe is a software application that upgrades the micro-code
of SSD drives made by STEC Inc. for the Dell Inspiron 910 netbook 
computer.

SSDUpgrade.exe and its associated file UMPC.sys are intended to run
under Windows XP environment. Its use is not recommended under other
operating systems.

To use SSDUpgrade.exe, please follow the directions below:

1) Intall the upgrade utility using "SSD Upgrade Install.exe" program
   program will prompt you for a folder to install the utility

2) Start SSDUpgrade.exe by double-clicking on its icon. SSDUpgrade.exe
   will stop with a warning message if:
 
   - UMPC.sys is not found in the same directory
   - no upgradable drives are found in the system
   - no upgradable micro-code can be found

3) Please read the entire legal disclaimer, the "Upgrade" button
   will not be enabled until the entire disclaimer is read.
   By installing or using this program you agree to the legal disclaimer
   displayed in the upgrade utility

4) Please follow the direction in the disclaimer and backup data
   in the SSD drive.

5) When ready, click on the "Upgrade" button to start the upgrade
   process.

6) The upgrade process should complete within a few seconds. If
   the upgrade process was successful, then please follow the prompt
   and restart the computer. If the upgrade process failed, then
   please follow the prompt and contact customer service.


Whether or not the upgrade process is successful, SSDUpgrade.exe will
create a log file, called "netbook-ssd-micro-code-upgrade.log" in the
same directory as SSDUpgrade.exe. Customer service may ask you to
provide this file, which contains information regarding why the 
upgrade process failed.

If successfully completed, upgrading the micro-code of SSD drive using
SSDUpgrade.exe should not erase data on the SSD drive. Never the less,
because of the risk of failure during the upgrade process, you should
back-up all data on the SSD drive before performing the upgrade.

######################################################################

Regarding UMPC.sys

######################################################################

UMPC.sys is a filter driver program that when activated, disables all
other program’s access to the SSD drive, and only allows the firmware 
update program access to the drive. This driver is loaded and 
activated right before the update process starts, and is de-
activated and unloaded right after the update process finishes. 

This program is needed because the micro-code upgrade process can not
be interrupted by any other process.