===========================
R E L E A S E N O T E S
===========================
Broadcom ASF Remote Configuration Program
Copyright (c) 2000-2002 Broadcom Corporation
All rights reserved.
September 19, 2002
Introduction
============
Broadcom ASF Remote Configuration is an command line application that allows
end users to configure Broadcom ASF support adapter remotely. This application
requires Microsoft WMI and Broadcom CIM provider on the host system before
it is able to connect and configure.
History
=======
CHANGES in v3.03
------------------
(Require Broadcom CIM Provider version 3.01 or above)
- Resolved ClearQuest ID:
5327: In CIOB-E system, ASFRemoteCfg selects the wrong adapter when configuring ASF.
CHANGES in v3.02
------------------
(Require Broadcom CIM Provider version 3.01 or above)
- Resolved ClearQuest ID:
5506: Need update ASFRCfg and BASFRCfg.vbs help descriptions
CHANGES in v3.01
------------------
(Require Broadcom CIM Provider version 3.01 or above)
- Supports SNMP community name up to 19 characters
- Resolved ClearQuest ID:
5242: Since ASFRemoteConfig has been renamed to "ASFRCfg", ALL words begin with "ASFRemoteConfig" should be changed accordingly.
5243: ASFRCfg only performed enable/disable ASF eventhough other parameters were entered.
5253: ASFRCfg - Unable to modify ASF parameters when '-username' and '-pass' options are used.
CHANGES in v3.00
------------------
(Require Broadcom CIM Provider version 3.00 or above)
- Supports SNMP community name
- Resolved ClearQuest ID:
4815: Cannot Disable ASF from ASFRemoteConfig
4823: ASFRemoteConfig can set PET retransmit value greater than 29 seconds -- violating ASF spec.
CHANGES in v1.01
------------------
- First release.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.