;*********************************************************************** ; ; OEMSETUP.INF ; ; Xircom CreditCard Token Ring Adapters ; Windows NT Network Setup File ; ; Copyright (c) 1999 Xircom, Inc. All Rights Reserved ; ; $Date: Dec 02 1999 11:18:14 $ ; $Revision: 1.6 $ ; ;**************************************************************************************************** [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA MCA [Options] CTN ;----------------------------------------------------------------------- ; Text strings to identify adapter options. ;----------------------------------------------------------------------- [OptionsTextENG] CTN = "Xircom CreditCard Token Ring Adapter" [FileConstants] DialogDllName = "CTN.DLL" SoftwareType = "driver" Exit_Code = 0 ; ; Product Information. ; Manufacturer = "Xircom" ProductMajorVersion = "1" ProductMinorVersion = "00" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ; ; Software information. ; ProductSoftwareName = "CTN4" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(ProductSoftwareName)".sys" NetRuleSoftwareType = "xirtrSys ndisDriver xirtrDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """xirtrSys"" yes no container" NetRuleSoftwareClass = {"xirtrDriver basic"} NetRuleSoftwareBindable = {"xirtrDriver xirtrAdapter non exclusive 100"} ; ; Hardware information. ; ProductHardwareName = "CTN4" NetRuleHardwareType = "xirtr xirtrAdapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"xirtrAdapter basic"} ; ; Registry Key. ; ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" ; ; Tuple Information ; VERS1Manufacturer = "Xircom" VERS1Product = "CreditCard Token Ring" VERS1Type = "CT-2" PCMCIA = 1 ; ; EventLog Message File ; NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" [GeneralConstants] INFVersionString = "1.00" ; ; File names, etc. ; UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" ; ; Program flow control variables. ; RUNDLLCODE = 1 HOTPROGRAMPCMCIA = "" from = "" to = "" ; ; Return codes; Exit_Code is set to one of these ; ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 ; ; Miscellaneous. ; KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour, ; Minute, Second } Now = {} ? $(!LIBHANDLE) GetSystemDate ;--------------------------------------------------------------------------- ; 1. Identify ; ; DESCRIPTION: To verify that this INF deals with the same type of options ; as we are choosing currently. ; ; INPUT: None ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette description ;--------------------------------------------------------------------------- [Identify] ; ; read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------ ; 2. ReturnOptions: ; ; DESCRIPTION: To return the option list supported by this INF and the ; localised text list representing the options. ; ; ; INPUT: $($0): Language used. ( ENG | FRN | ... ) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE ; STATUS_FAILED ; STATUS_NOTSUPPORTED ; ; $($R1): Option List ; $($R2): Option Text List ;------------------------------------------------------------------------ [ReturnOptions] ; ; set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ; ; Check if the platforms requested is supported ; ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; ; form a list of all the options and another of the text representing ; returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------ ; ; InstallOption: ; ; This section is shelled to by main installation processing ; or by NCPASHEL.INF during reconfig, removal, update, etc. ; ; ; FUNCTION: To copy files representing Options ; To configure the installed option ; To update the registry for the installed option ; ; INPUT: $($0): Language to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy (YES | NO) ; $($4): DoCopy (YES | NO) ; $($5): DoConfig (YES | NO) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED ; ;------------------------------------------------------------------------ [InstallOption] ; ; Un-comment for debugging. ; ; set !DebugOutputControl = 1 ; ; Set default values for ; set Status = STATUS_FAILED ; ; extract parameters ; set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) Debug-Output "XIRCOM: STF_CWDIR = "$(!STF_CWDIR) Debug-Output "XIRCOM: STF_LANGUAGE = "$(!STF_LANGUAGE) Debug-Output "XIRCOM: Option = "$(Option) Debug-Output "XIRCOM: SrcDir = "$(SrcDir) Debug-Output "XIRCOM: AddCopy = "$(AddCopy) Debug-Output "XIRCOM: DoCopy = "$(DoCopy) Debug-Output "XIRCOM: DoConfig = "$(DoConfig) ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif ; define all the constants set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin ; ; Assume all is well. ; set CommonStatus = STATUS_SUCCESSFUL EndWait ; ; Set up the operation-mode-based variables and gaily welcome ; the user. If the "install mode" variable is improperly set, ; assume this is a new installation. ; Begin = + Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure ; set ActivateDetection = TRUE set StartLabel = configureadapter ; ; You cannot config the software component ; Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE ; set ActivateDetection = TRUE endif ; set the [Default values] ; set AdBuffSizeValue = *($(AdBuffSizeList), 1) ; 1024 set EarlyTokRlsValue = "ON" set FullTxStValue = "OFF" set IOBaseAddrValue = *($(IOBaseAddrList), 18) ; 0x320 set IRQValue = *($(IRQList), 3) ; 5 set MaxFrSzValue = *($(MaxFrSzList), 3) ; 4096 set MemoryAddrValue = *($(MemoryAddrList), 53) ; 0xD4000 set RingSpeedValue = *($(RingSpeedList), 2) ; 16 Mbps set RxBuffsValue = *($(RxBuffsList), 2) ; 3 set TRxBuffsValue = *($(TxBuffsList), 1) ; 2 Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) ;----------------------------------------------- ; Installation Section ;----------------------------------------------- installadapter = + Debug-Output "XIRCOM: installadapter" ; ; First, check whether the same version of the software exists ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) ; ; Same version already existed in the local machine ; Popup the dialog and ask the user whether he wants to continue ; CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) ; ; Cannot Install the same software again ; Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else ; ; Add a new adapter card? ; Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif ; ; dll load addition ; Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) install "Install-Dll" goto adaptersetup ;----------------------------------------------- ; Configuration Section ;----------------------------------------------- ; ; Get the current values of all the parameters ; configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif ; ; Get the other parameters; they're attached to the service parameters key ; Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) ; ; We don't need the services key, so close it. ; CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} ; ; Get the old values from the Registry [Get Values] ; ********************************************************* EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "AdapterBuffSize" set AdBuffSizeIndex = $(ValueData) else-ifstr(i) $(ValueName) == "EarlyRelease" set EarlyTokRlsValue = $(ValueData) else-ifstr(i) $(ValueName) == "FrameStatus" set FullTxStValue = $(ValueData) else-ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set IRQValueIndex = $(ValueData) else-ifstr(i) $(ValueName) == "MaxFrameSize" set MaxFrSzIndex = $(ValueData) else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress" set MemoryAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "RingSpeed" set RingSpeedIndex = $(ValueData) else-ifstr(i) $(ValueName) == "RxBuffers" set RxBuffsIndex = $(ValueData) else-ifstr(i) $(ValueName) == "TxBuffers" set TxBuffsIndex = $(ValueData) endif EndForListDo set AdBuffSizeValue = *($(AdBuffSizeList), ~($(AdBuffSizeValues),$(AdBuffSizeIndex))) ifstr(i) $(AdBuffSizeValue) == "" set AdBuffSizeValue = *($(AdBuffSizeList), 1) endif set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex))) ifstr(i) $(IOBaseAddrValue) == "" set IOBaseAddrValue = *($(IOBaseAddrList), 1) endif set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex))) ifstr(i) $(IRQValue) == "" set IRQValue = *($(IRQList), 2) endif set MaxFrSzValue = *($(MaxFrSzList), ~($(MaxFrSzValues),$(MaxFrSzIndex))) ifstr(i) $(MaxFrSzValue) == "" set MaxFrSzValue = *($(MaxFrSzList), 1) endif set MemoryAddrValue = *($(MemoryAddrList), ~($(MemoryAddrValues),$(MemoryAddrIndex))) ifstr(i) $(MemoryAddrValue) == "" set MemoryAddrValue = *($(MemoryAddrValues), 2) endif set RingSpeedValue = *($(RingSpeedList), ~($(RingSpeedValues),$(RingSpeedIndex))) ifstr(i) $(RingSpeedValue) == "" set RingSpeedValue = *($(RingSpeedValues), 0) endif set RxBuffsValue = *($(RxBuffsList), ~($(RxBuffsValues),$(RxBuffsIndex))) ifstr(i) $(RxBuffsValue) == "" set RxBuffsValue = *($(RxBuffsList), 1) endif set TxBuffsValue = *($(TxBuffsList), ~($(TxBuffsValues),$(TxBuffsIndex))) ifstr(i) $(TxBuffsValue) == "" set TxBuffsValue = *($(TxBuffsList), 1) endif ifstr(i) $(EarlyTokRlsValue) == "" set EarlyTokRlsValue = 1 endif ifstr(i) $(FullTxStValue) == "" set FullTxStValue = 0 endif ifint $(EarlyTokRlsValue) == 1 set EarlyTokRlsValue = "ON" else set EarlyTokRlsValue = "OFF" endif ifint $(FullTxStValue) == 1 set FullTxStValue = "ON" else set FullTxStValue = "OFF" endif set CheckItemsIn = {$(EarlyTokRlsValue),$(FullTxStValue)} ; Save the settings as they were read from the Registry. ; Shell $(ParamInf) Param_SaveValues ; Set CurrParamSettings = $($R0) ; ; Put up the adapter configuration dialog if necessary. ; ; Note that $(CurrParamSettings) has the old known parameter values. ; adaptersetup = + Debug-Output "XIRCOM: adaptersetup" ;Shell "" DebugConfiguration "before displaying dialog" Set from = adapteroptions adapteroptions = + set CheckItemsIn = {$(EarlyTokRlsValue),$(FullTxStValue)} LoadLibrary "disk 1" $(DialogDllName) hLib read-syms FileDependentDlg$(!STF_LANGUAGE)Option$(Option) set ENABLER = 0 ifint $(RUNDLLCODE) == 1 ifint $(PCMCIA) == 1 LibraryProcedure ENABLER, $(hLib), EnablerRunning ; check for enabler type ifint $(ENABLER) == 1 set Static1Label = "Configuring driver for Microsoft Enabler" else-ifint $(ENABLER) == 2 set Static1Label = "Configuring driver for third party Card & Socket Services" else set Static1Label = "Configuring driver for Xircom Enabler" endif endif endif ui start "InputDlg" $(hLib) set ExitButton = $(ButtonPressed) Debug-Output " ButtonPressed "$(ButtonPressed) Debug-Output " DLGEVENT "$(DLGEVENT) FreeLibrary $(hLib) ifstr(i) $(DLGEVENT) == "CONTINUE" set IOBaseAddrIndex = $(Combo1Out) set MemoryAddrIndex = $(Combo2Out) set IRQValueIndex = $(Combo3Out) set RingSpeedIndex = $(Combo4Out) set AdBuffSizeIndex = $(Combo5Out) set MaxFrSzIndex = $(Combo6Out) set RxBuffsIndex = $(Combo7Out) set TxBuffsIndex = $(Combo8Out) set EarlyTokRlsValue = *($(CheckItemsOut), 1) set FullTxStValue = *($(CheckItemsOut), 2) set ExitButton = $(ButtonPressed) else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else set CommonStatus = STATUS_USERCANCEL ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif ; ; If installing, go create the necessary keys; ; if configuring, they're already open. ; skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ; ; Add Software Component ; ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; ; At this point: ; $R1 contains the product version key handle; ; $R2 contains the NetRules subkey handle; ; $R3 contains the new Services key handle; and ; $R4 contains the Parameters key ; $R5 contains the Linkage Key ; set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif ; ; Create the HARDWARE\Netcard region and its corresponding service ; Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif ; ; At this point: ; $R1 Registry key variable for HARDWARE\Netcard\(n) ; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules ; $R3 Registry key handle for <service>\Parameters key ; $R4 Adapter number assigned to adapter ; $R5 Service name generated by combining svc name with adapter number ; set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters ; ; REQUIRED: $(KeyParameters) contains service Parameters key handle ; writeparameters = + Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; ; Add the rest of the parameters to the Services area ; ifstr(i) $(EarlyTokRlsValue) == "ON" set EarlyTokRlsValue = "1" else set EarlyTokRlsValue = "0" endif ifstr(i) $(FullTxStValue) == "ON" set FullTxStValue = "1" else set FullTxStValue = "0" endif set AdBuffSizeValue = *($(AdBuffSizeValues), ~($(AdBuffSizeList), $(AdBuffSizeIndex))) set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex))) set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList), $(IOBaseAddrIndex))) set IOLengthValue = 31 set MemoryAddrValue = *($(MemoryAddrValues), ~($(MemoryAddrList), $(MemoryAddrIndex))) set-add CommonMemoryAddrValue = $(MemoryAddrValue), 4096 set MaxFrSzValue = *($(MaxFrSzValues), ~($(MaxFrSzList), $(MaxFrSzIndex))) set RingSpeedValue = *($(RingSpeedValues), ~($(RingSpeedList), $(RingSpeedIndex))) set RxBuffsValue = *($(RxBuffsValues), ~($(RxBuffsList), $(RxBuffsIndex))) set TxBuffsValue = *($(TxBuffsValues), ~($(TxBuffsList), $(TxBuffsIndex))) set NewValueList = {{AdapterBuffSize, $(NoTitle),$(!REG_VT_DWORD),$(AdBuffSizeValue)},+ {BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+ {BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {EarlyRelease, $(NoTitle),$(!REG_VT_DWORD),$(EarlyTokRlsValue)},+ {FrameStatus, $(NoTitle),$(!REG_VT_DWORD),$(FullTxStValue)},+ {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {IoLength, $(NoTitle),$(!REG_VT_DWORD),$(IOLengthValue)},+ {MaxFrameSize, $(NoTitle),$(!REG_VT_DWORD),$(MaxFrSzValue)},+ {MediaType, $(NoTitle),$(!REG_VT_DWORD),2},+ {MemoryMappedBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(CommonMemoryAddrValue)},+ {MemoryMappedSize, $(NoTitle),$(!REG_VT_DWORD),4096},+ {PCCARDAttributeMemoryAddress, $(NoTitle),$(!REG_VT_DWORD),$(MemoryAddrValue)},+ {PCCARDAttributeMemorySize, $(NoTitle),$(!REG_VT_DWORD),4096},+ {PCCARDAttributeMemoryOffset, $(NoTitle),$(!REG_VT_DWORD),0},+ {PCCARDMemoryWindowOffset, $(NoTitle),$(!REG_VT_DWORD),131072},+ {PCMCIA, $(NoTitle),$(!REG_VT_DWORD),1},+ {RingSpeed, $(NoTitle),$(!REG_VT_DWORD),$(RingSpeedValue)},+ {RxBuffers, $(NoTitle),$(!REG_VT_DWORD),$(RxBuffsValue)},+ {TxBuffers, $(NoTitle),$(!REG_VT_DWORD),$(TxBuffsValue)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) CloseRegKey $(KeyParameters) ; -------------------------------------------------------------------------------- ; Reprogram the PCMCIA slot with the new parameters ; Should only be done during first time installation of NT, and if Xircom card was found ; For now, we do it always... ; -------------------------------------------------------------------------------- ; Call out to the PCMCIA driver only if we're loading a PCMCIA device ifint $(RUNDLLCODE) == 1 ifint $(PCMCIA) == 1 ifint $(ENABLER) == 1 ifint $(HOTPROGRAMPCMCIA) == 1 ifint $(SLOTFOUND) == 1 ; and a Xircom card was found in a slot LoadLibrary "disk 1" $(DialogDllName) hLib Debug-Output "Enabling network resources" ifstr(i) $(Option) == CM2NDIS3 LibraryProcedure STATUS, $(hLib), SetupSlot $(SLOT) 0 $(IRQValue) $(IOBaseAddrValue) $(IOLengthValue) $(MemoryAddrValue) 4096 0 else LibraryProcedure STATUS, $(hLib), SetupSlot $(SLOT) $(IRQValue) 0 $(IOBaseAddrValue) $(IOLengthValue) $(MemoryAddrValue) 4096 0 endif Debug-Output "SetupSlot: "$(STATUS) FreeLibrary $(hLib) endif endif endif endif endif ; -------------------------------------------------------------------------------- ; Write the parameters to the PCMCIA database section, iff running MS Enabler ; Add/replace only the parts for the CT2 ; -------------------------------------------------------------------------------- set PCMCIADatabaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase" set PCMCIADatabaseXircomKeyName = $(PCMCIADatabaseKeyName)"\Xircom" OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName) $(MAXIMUM_ALLOWED) PCMCIADatabaseKey ifstr $(PCMCIADatabaseKey) == $(NULL) Debug-Output "Pcmcia\DataBase not present" else ; PCMCIA.sys is installed and registry has database section in it. ; Try to open Xircom section. Delete it if found OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName)"\Xircom" $(MAXIMUM_ALLOWED) PCMCIADatabaseXircomKey ifstr $(PCMCIADatabaseXircomKey) == $(NULL) ; open failed, so create Xircom subkey CreateRegKey $(PCMCIADatabaseKey) {"Xircom", 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIADatabaseXircomKey endif ; Open "CreditCard Token Ring" aka $(VERS1Product) ---------------------------------------------------------------------- OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseXircomKeyName)"\"$(VERS1Product) $(MAXIMUM_ALLOWED) PCMCIADatabaseXircomCT2Key ifstr $(PCMCIADatabaseXircomCT2Key) == $(NULL) CreateRegKey $(PCMCIADatabaseXircomKey) {$(VERS1Product), 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseXircomCT2Key endif ; Add the card/driver. -------------------------------------------------------------------------------------- SetRegValue $(PCMCIADatabaseXircomCT2Key) {Driver, 0, $(!REG_VT_SZ),"ctn4"} SetRegValue $(PCMCIADatabaseXircomCT2Key) {AttributeMemorySize, 0, $(!REG_VT_DWORD),4096} SetRegValue $(PCMCIADatabaseXircomCT2Key) {DeviceType, 0, $(!REG_VT_SZ),"NET"} CloseRegKey $(PCMCIADatabaseXircomCT2Key) CloseRegKey $(PCMCIADatabaseXircomKey) CloseRegKey $(PCMCIADatabaseKey) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful ;----------------------------------------------- ; Binding section ;----------------------------------------------- bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal ;----------------------------------------------- ; Removeadapter section ;----------------------------------------------- removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ;----------------------------------------------- ; Upgrade Software section ;----------------------------------------------- UpgradeSoftware = + ; ; First determine whether we want to do upgrade or update for software ; or hardware component. Then we will determine whether the Mode is ; update or upgrade. ; ; If the same version of the product existed in the registry, we do ; update. Otherwise, we will do a upgrade ; ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Upgrade software component ; ; see whether the same version exist or not ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) ; ; Update the binaries ; Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif ; Upgrade the version number ; SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ; ; do nothing for update ; ifint $(Version) != $(ProductVersion) ; ; If the major version number is not the same, ; it is major upgrade. So let Upgrade the product ; ; ; make other upgrade change if necessary ; endif CloseRegKey $(KeyProduct) else ; ; Cannot Open software key, goto ERROR ; goto fatalregistry endif else ; ; upgrade/update hardware component ; There is no different between upgrade and update for hardware ; component ; ; 1. Get the Service Name ; 2. Change the NetRule section if necessary ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) ; ; Get Service name ; GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) ; ; Change the NetRule if necessary ; OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) ; ; Make the change.... ; else ; ; Error, cannot open net rules key ; goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else ; ; Error, cannot open network card key ; goto fatalregistry endif ; ; 3. Change the service section of the hardware. i.e., ; ParameterName change, value change, etc. ; OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) ; ; Get the ServiceKey to change the Start value ; or Type value. Or open Parameters key to ; change the hardware parameters if necessary. ; CloseRegKey $(ServiceKey) else ; ; Error, cannot open network card key ; goto fatalregistry endif endif goto end ; ; End of Upgrade Software ; ; ; Escape hatches ; successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ; ; warning display ; warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif ; ; non fatal error display ; nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif ; ; Registry is broken ; fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal ; ; Netcard detection failure ; fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal ; ; fatal error display ; fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ; ; Shelling error ; ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ; ; if OEM_ABANDON_ON == TRUE, then remove the registry entries ; ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "OEMSETNT.INF" Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0) Debug-Output $(InfName)" IRQValue is "$(!p:IRQValue) Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue) Debug-Output $(InfName)" MemoryAddr is "$(!p:MemoryAddrValue) Debug-Output $(InfName)" RingSpeed is "$(!p:RingSpeedValue) Debug-Output $(InfName)" AdBuffSz is "$(!p:AdBuffSizeValue) Debug-Output $(InfName)" MaxFrSzValue is "$(!p:MaxFrSzValue) Debug-Output $(InfName)" RxBuffsValue is "$(!p:RxBuffsValue) Debug-Output $(InfName)" TRxBuffsValue is "$(!p:TRxBuffsValue) return ;*************************************************************** ; INSTALL SECTIONS ;*************************************************************** [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-Driver $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" ; ; Copy files in the copy list ; set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" ;set STF_VERSION = "YES" AddSectionFilesToCopyList Files-Driver $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "Windows Drivers Disk for Xircom CreditCard Token Ring Adapter" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, OEMSETNT.INF, SIZE=43000, RENAME=$(!UG_Filename) [Files-Dll] 1, CTN.DLL, SIZE=23000 [Files-Driver] 1, CTN4.SYS, SIZE=43000 [LanguagesSupported] ENG ;*********************************************************************** ; Language-Dependent Dialog Constants ;*********************************************************************** [FileConstantsENG] ; ; Variables to support thermometer gauge and error dialogs ; ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ; ; Product Info ; FunctionTitle = "Xircom CreditCard Token Ring Adapter Setup v"$(INFVersionString) ; ; Software ; ProductSoftwareDescription = "Xircom CreditCard Token Ring Miniport Driver" ; ; Hardware ; ProductHardwareDescription = "Xircom CreditCard Token Ring Adapter" ProductSoftwareTitle = "Xircom CreditCard Token Ring Miniport Driver" ProductHardwareTitle = "Xircom CreditCard Token Ring Adapter" IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) MemoryAddrList = ^(MemoryAddrChoices,1) MemoryAddrValues = ^(MemoryAddrChoices,2) IRQList = ^(IRQChoices, 1) IRQValues = ^(IRQChoices, 2) RingSpeedList = ^(RingSpeedChoices,1) RingSpeedValues = ^(RingSpeedChoices,2) AdBuffSizeList = ^(AdBuffSizeChoices, 1) AdBuffSizeValues = ^(AdBuffSizeChoices, 2) MaxFrSzList = ^(MaxFrSzChoices, 1) MaxFrSzValues = ^(MaxFrSzChoices, 2) RxBuffsList = ^(RxBuffsChoices, 1) RxBuffsValues = ^(RxBuffsChoices, 2) TxBuffsList = ^(TxBuffsChoices, 1) TxBuffsValues = ^(TxBuffsChoices, 2) [DialogConstantsENG] Help = "&Help" Exit = "&Cancel" OK = "O&K" HelpContext = "" Continue = "C&ontinue" Cancel = "C&ancel" ;CardInfo = "Card Info" ; ----------------------------------------------------------------------- ; Dialog constants for basic installation. ; ----------------------------------------------------------------------- [FileDependentDlgENGOptionCTN] DlgType = "RadioCombination" DlgTemplate = "CT2" Caption = $(FunctionTitle) HelpContext = $(!IDH_DB_OEMNADE2_INS) CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO, NO, NO, NO, NO} Combo1Label = "I/O Port:" Combo2Label = "Memory Address:" Combo3Label = "Interrupt:" Combo4Label = "Ring Speed:" Combo5Label = "Adapter Buffer Size:" Combo6Label = "Max Frame Size:" Combo7Label = "Receive Buffers:" Combo8Label = "Transmit Buffers:" Check1 = "Early Token Release" Check2 = "Full Transmit Status" ;--------------------------- Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrValue) Combo2List = $(MemoryAddrList) Combo2Out = $(MemoryAddrValue) Combo3List = $(IRQList) Combo3Out = $(IRQValue) Combo4List = $(RingSpeedList) Combo4Out = $(RingSpeedValue) Combo5List = $(AdBuffSizeList) Combo5Out = $(AdBuffSizeValue) Combo6List = $(MaxFrSzList) Combo6Out = $(MaxFrSzValue) Combo7List = $(RxBuffsList) Combo7Out = $(RxBuffsValue) Combo8List = $(TxBuffsList) Combo8Out = $(TxBuffsValue) ;--------------------------- ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List,Combo5List,Combo6List,Combo7List,Combo8List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out, Combo6Out, Combo7Out, Combo8Out} CheckItemsIn = {$(EarlyTokRlsValue),$(FullTxStValue)} CheckItemsOut = {Check1Out, Check2Out} EditTextIn = {"","","","",""} EditTextLim = {"","","","",""} [IOBaseAddrChoices] ; ; exclude 0x3E0 (PCIC) and 0x240 (TCIC) ; "0x200",512 "0x210",528 "0x220",544 "0x230",560 ; "0x240",576 "0x250",592 "0x260",608 "0x270",624 "0x280",640 "0x290",656 "0x2A0",672 "0x2B0",698 "0x2C0",714 "0x2D0",730 "0x2E0",746 "0x2F0",752 "0x300",768 "0x310",784 "0x320",800 "0x330",816 "0x340",832 "0x350",848 "0x360",864 "0x370",880 "0x380",896 "0x390",912 "0x3A0",928 "0x3B0",944 "0x3C0",960 "0x3D0",976 [MemoryAddrChoices] "0xA0000", 655360 "0xA1000", 659456 "0xA2000", 663552 "0xA3000", 667648 "0xA4000", 671744 "0xA5000", 675840 "0xA6000", 679936 "0xA7000", 684032 "0xA8000", 688128 "0xA9000", 692224 "0xAA000", 696320 "0xAB000", 700416 "0xAC000", 704512 "0xAD000", 708608 "0xAE000", 712704 "0xAF000", 716800 "0xB0000", 720896 "0xB1000", 724992 "0xB2000", 729088 "0xB3000", 733184 "0xB4000", 737280 "0xB5000", 741376 "0xB6000", 745472 "0xB7000", 749568 "0xB8000", 753664 "0xB9000", 757760 "0xBA000", 761856 "0xBB000", 765952 "0xBC000", 770048 "0xBD000", 774144 "0xBE000", 778240 "0xBF000", 782336 "0xC0000", 786432 "0xC1000", 790528 "0xC2000", 794624 "0xC3000", 798720 "0xC4000", 802816 "0xC5000", 806912 "0xC6000", 811008 "0xC7000", 815104 "0xC8000", 819200 "0xC9000", 823296 "0xCA000", 827392 "0xCB000", 831488 "0xCC000", 835584 "0xCD000", 839680 "0xCE000", 843776 "0xCF000", 847872 "0xD0000", 851968 "0xD1000", 856064 "0xD2000", 860160 "0xD3000", 864256 "0xD4000", 868352 "0xD5000", 872448 "0xD6000", 876544 "0xD7000", 880640 "0xD8000", 884736 "0xD9000", 888832 "0xDA000", 892928 "0xDB000", 897024 "0xDC000", 901120 "0xDD000", 905216 "0xDE000", 909312 "0xDF000", 913408 "0xE0000", 917504 "0xE1000", 921600 "0xE2000", 925696 "0xE3000", 929792 "0xE4000", 933888 "0xE5000", 937984 "0xE6000", 942080 "0xE7000", 946176 "0xE8000", 950272 "0xE9000", 954368 "0xEA000", 958464 "0xEB000", 962560 "0xEC000", 966656 "0xED000", 970752 "0xEE000", 974848 "0xEF000", 978944 "0xF0000", 983040 "0xF1000", 987136 "0xF2000", 991232 "0xF3000", 995328 "0xF4000", 999424 "0xF5000", 1003520 "0xF6000", 1007616 "0xF7000", 1011712 "0xF8000", 1015808 "0xF9000", 1019904 "0xFA000", 1024000 "0xFB000", 1028096 "0xFC000", 1032192 "0xFD000", 1036288 "0xFE000", 1040384 [IRQChoices] "3",3 "4",4 "5",5 "7",7 "10",10 "11",11 "15",15 [RingSpeedChoices] "4 Mbps",4 "16 Mbps",16 [AdBuffSizeChoices] "1024",1024 "2048",2048 "3072",3072 "4096",4096 "5120",5120 "6144",6144 "7168",7168 "8192",8192 [MaxFrSzChoices] "2048",2048 "3072",3072 "4096",4096 "5120",5120 "6144",6144 "7168",7168 "8192",8192 [RxBuffsChoices] "2",2 "3",3 "4",4 "5",5 "6",6 "7",7 "8",8 "9",9 "10",10 [TxBuffsChoices] "2",2 "3",3 "4",4 "5",5 "6",6 "7",7 "8",8 "9",9 "10",10Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.