POS-P1515 Release note ------------------------------------------------------------ P1515A11 checksum = 0A45175D 2010-02-12 1. Modify ALC262 verb table fix control panel issue. ------------------------------------------------------------ P1515A10 checksum = 0A45BE09 2009-12-16 1. Set D31:F0 Reg A4 bit3=0. 2. Add support flash MX25L8005. 3. Add support ALC262 HD audio. ------------------------------------------------------------ P1515A09 checksum = 0A48A69A 2009-10-02 1. Modify BIOS menu item. 2.<013> Add CMOS 0x88 for netboot. 3.<014> Fix set "Wait For 'F1' If Error" to Disabled CMOS lose issue. 4. Remove "Evaluation Copy" message. 5. Add Radiant logo. ------------------------------------------------------------ P1515A08 checksum = 0A4704D6 2009-09-04 1. Add 2 sec post time delay. 2. WOL from S3 open screen. ------------------------------------------------------------ P1515A07 checksum = 0A469243 2009-08-26 1. Remove USB device check beep sound. 2. Open "USB Device Wakeup From S3/S4" option and set to Enabled. ------------------------------------------------------------ P1515A06 checksum = 0A461BF7 2009-08-04 1. Release 1MB bios rom for DVT. ------------------------------------------------------------ P1515A05 checksum = 3A16C61E 2009-07-22 1.<012> Fix boot device priority bbs.equ ------------------------------------------------------------ P1515A04 checksum = 3A172645 2009-07-06 1.<009> + add recovery button function. respar.asm 2.<010> set GPIO38 output high, fix cashdraw eject issue. sboembb.asm 3.<011> Only USB port0 set to first boot device. bbs.equ, bbs1.inc, int13pnp.equ, usbi13.asm ------------------------------------------------------------ P1515A03 checksum = 3A17AECF 2009-06-26 1. Fix code segment broken issue. add back PBL function. 2.<007> Fix GPIO38->output, GPIO39->input 3. Remove F2/F3 from bios setup menu <F1> help 4. Set USB SSD default to first boot device 5.<008> modify H/W monitor CPU temperature ------------------------------------------------------------ P1515A02 checksum = 3A187384 2009-06-12 1.<004> + save SB reg after resume runacpis.asm 2.<005> + fix resume from S3 led incorrect oemracpi.asm 3. modify VBIOS. 4 add DMI strings. (Type1) a) Radiant Systems, Inc b) P1515 5.<006> + red light blinking on post error. smbios.asm, smbusarp.asm, ctrlfunc.asm, up.asm, imemory.inc 6. correct lan boot rom to RTL8111. add boot string "IBA GE Slot00C8 v1270" 7. add ACPI_SLC table. ------------------------------------------------------------ P1515A01 checksum = 3A29887C 2009-06-05 1.<001> + auto load cmos default if cmos error. errmgr.asm 2.<002> + beep if no memory installed. imemory.inc 3.<003> + bootup LED controll sboembb.asm, bios.asmDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.