;*********************************************************************** ; ; OEMSETUP.INF ; ; 3Com Windows NT 4.0 WE7x7 driver installation for Wireless LAN Cards ; ;----------------------------------------------------------------------- ; OPTION TYPE ; ----------- ; This identifies the Option type we are dealing with. The different ; possible types are: ; ; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ... ; ; Types specific to networking: ; ; NetAdapter, a netcard / adapter combination or just a netcard ; NetDriver, just a netcard driver ; NetTransport, a complete NDIS-compliant TDI transport stack ; NetService, an NT networking service ; NetWork, a complete network ensemble. ; NetProvider a complete network which supports NT MPR protocol ; ;============================================================================ ; Current Version %VER 1.0.0.19b ;============================================================================ [Identification] OptionType = NetAdapter ;----------------------------------------------------------------------- ; PlatformsSupported ; ------------------ ; This identifies the platforms supported by the adapter card. ; Possible types are: ; ; ISA, EISA, PCI, PCMCIA and MCA ;----------------------------------------------------------------------- [PlatformsSupported] ISA PCMCIA PCI ;----------------------------------------------------------------------- ; OPTION LIST ; ----------- ; This section lists the OEM Option key names. These keys are locale ; independent and used to represent the option in a locale independent ; manner. ; ;----------------------------------------------------------------------- [Options] WE7x7 WE7x7PCI ;*********************************************************************** ; CONSTANTS FOR USING DIALOGS ;*********************************************************************** [FileConstants] ; ; File names, etc. ; UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 ; ; EventLog Message File ; NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" ; ; Product Info ; HKEY_LOCAL_MACHINE\SOFTWARE\3Com Corporation\CurrentVersion ; Manufacturer = "3Com Corporation" ProductMajorVersion = "4" ProductMinorVersion = "1" ProductEngVersion = "02" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductInfName = "oemnad3c.inf" ; ; Software ; HKEY_LOCAL_MACHINE\SOFTWARE\3Com Corporation\CurrentVersion\NetRules ; ProductSoftwareName = "WE7x7ND4" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\WE7x7ND4.sys" NetRuleSoftwareType = "WE7x7Sys ndisDriver WE7x7Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """WE7x7Sys"" yes no container" NetRuleSoftwareClass = {"WE7x7Driver basic"} NetRuleSoftwareBindable = {"WE7x7Driver WE7x7Adapter non exclusive 100"} ; ; Hardware ; HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\n\NetRules ; ProductHardwareName = "WE7x7ND4" ProductHardwareWE7x7Title = "3Com 3CRWE737A AirConnect Wireless LAN PC Card" ProductHardwareWE7x7Description = "3Com 3CRWE737A AirConnect Wireless LAN PC Card" ProductHardwareWE7x7PCITitle = "3Com 3CRWE777A AirConnect Wireless LAN PCI Card" ProductHardwareWE7x7PCIDescription = "3Com 3CRWE777A AirConnect Wireless LAN PCI Card" NetRuleHardwareType = "WE7x7 WE7x7Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"WE7x7Adapter basic"} ; ; Registry Key ; ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" ; [GeneralConstants] ; ; Program flow control variables. ; from = "" to = "" ; ; Return codes; Exit_Code is set to one of these ; ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 CurrentControlSet = "SYSTEM\CurrentControlSet" KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" ProcessingMode = "0" ; Default = 0 (Install) TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour, ; Minute, Second } Now = {} ? $(!LIBHANDLE) GetSystemDate ;--------------------------------------------------------------------------- ; 1. Identify ; ; DESCRIPTION: To verify that this INF deals with the same type of options ; as we are choosing currently. ; ; INPUT: None ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette description ;--------------------------------------------------------------------------- [Identify] ; ; read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) set !UG_Filename = $(ProductInfName) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------ ; 2. ReturnOptions: ; ; DESCRIPTION: To return the option list supported by this INF and the ; localised text list representing the options. ; ; ; INPUT: $($0): Language used. ( ENG | FRN | ... ) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE ; STATUS_FAILED ; STATUS_NOTSUPPORTED ; ; $($R1): Option List ; $($R2): Option Text List ;------------------------------------------------------------------------ [ReturnOptions] ; ; Set Status = STATUS_FAILED Set OptionList = {} Set OptionTextList = {} ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ; ; Check if the platforms requested is supported ; ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else Set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; ; form a list of all the options and another of the text representing ; returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------ ; ; InstallOption: ; ; This section is shelled to by main installation processing ; or by NCPASHEL.INF during reconfig, removal, update, etc. ; ; ; FUNCTION: To copy files representing Options ; To configure the installed option ; To update the registry for the installed option ; ; INPUT: $($0): Language to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy (YES | NO) ; $($4): DoCopy (YES | NO) ; $($5): DoConfig (YES | NO) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED ; ;------------------------------------------------------------------------ [InstallOption] Set !G:DebugOutputControl = 1 Set !DebugOutputControl = 1 Set !STF_DISPLAYDEBUGOUTPUT = 1 ; ; Set default values for ; set Status = STATUS_FAILED ; ; extract parameters ; set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) Set AdapterCardType = "PC Card" ;set default adapter type PCMCIA ifstr(i) $(Option) == WE7x7PCI Set AdapterCardType = "PCI Card" endif set to = Begin set from = Begin ; ; Assume all is well. ; set CommonStatus = STATUS_SUCCESSFUL EndWait ; ; Set up the operation-mode-based variables and gaily welcome ; the user. If the "install mode" variable is improperly set, ; assume this is a new installation. ; Begin = + Debug-Output $(ProductInfName)": InstallOption: Begin label Entered" Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall Set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update Set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind Set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure Set CommonStatus = STATUS_REBOOT Set ActivateDetection = TRUE Set StartLabel = configureadapter ; ; You cannot config the software component ; Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the WE7x7 driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif Set Error = $($R0) Set from = end Set to = end goto nonfatalinfo endif else Set ActivateDetection = TRUE Set StartLabel = installadapter Set OEM_ABANDON_OPTIONS = {} Set OEM_ABANDON_SOFTWARE = FALSE Set OEM_ABANDON_ON = TRUE endif ;=================================================== ; Netcard Detection logic ; ; Initialize use of netcard detection; ; Construct require global parameter variables ; Debug-Output $(ProductInfName)": ==================================================" Debug-Output $(ProductInfName)": STF_CWDDIR is: "$(!STF_CWDDIR) Debug-Output $(ProductInfName)": SrcDir is: "$(SrcDir) Debug-Output $(ProductInfName)": STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output $(ProductInfName)": Option is: "$(Option) Debug-Output $(ProductInfName)": !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output $(ProductInfName)": !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output $(ProductInfName)": !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output $(ProductInfName)": !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output $(ProductInfName)": ==================================================" Set DetectedCard = FALSE Set szDLLPath = $(!STF_WINDOWSSYSPATH)\WE7ncpa.dll Ifstr(i) $(ActivateDetection) != TRUE goto BeginTransport Endif ; ; Set !STF_NC_PARAMS and !STF_NC_PNAMES by calling ; PARAM.INF!Param_BuildTypeLists. ; Pass it a list of the form: ; ; { { <param name>, ; <name of choice list var>, ; <name of default var> }, ; ... ; } ; Debug-Output $(ProductInfName)": Bulding default Parm List " Set LibHand = "" ; 3Com DLL Handle Set FLibraryErrCtl = 1 Ifstr(i) $(!NTN_InstallMode) == "install" Debug-Output $(ProductInfName)" In Install mode" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif Set Error = $($R0) goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL goto successful Endif Set SrcDir = $($R1) Endif Set szDLLPath = $(SrcDir)NDIS5\WE7ncpa.dll LoadLibrary "Setup Disk #1" $(szDLLPath) LibHand Else-Ifstr(i) $(!NTN_InstallMode) == Update LoadLibrary "x" $(szDLLPath) LibHand Else-Ifstr(i) $(!NTN_InstallMode) == configure Debug-Output $(ProductInfName)" In Configure mode" LoadLibrary "x" $(szDLLPath) LibHand Debug-Output $(ProductInfName)" Just called LoadLibrary LibHand is "$(LibHand) Endif contproc = + ; for install get default parameters else dislay dialog and retrieve parameters LibraryProcedure ResultList, $(LibHand), CmdDoDialog $(AdapterCardType) ; Process any errors from dll ifstr $(ResultList) != "0" Debug-Output "Error returned from call to WE7ncpa.dll - exiting" Set CommonStatus = STATUS_USERCANCEL FreeLibrary $(LibHand) Goto end endif ; free 3Com dll ;FreeLibrary $(LibHand) BeginTransport =+ Debug-Output $(ProductInfName)": Install Mode = "$(!NTN_InstallMode) Set from = $(fatal) Set to = $(fatal) goto $(StartLabel) ;----------------------------------------------- ; Installation Section ;----------------------------------------------- installadapter = + Debug-Output $(ProductInfName)": InstallOption: installadapter" ; ; First, check whether the same version of the software exists ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) ; ; Same version already existed in the local machine ; Popup the dialog and ask the user whether he wants to continue ; CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) ; ; Cannot Install the same software again ; Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else ; ; Add a new adapter card? ; Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif endif goto adaptersetup ;----------------------------------------------- ; Configuration Section ;----------------------------------------------- ; ; Get the current values of all the parameters ; configureadapter = + Debug-Output $(ProductInfName)": InstallOption: configureadapter = Entered" Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif ; ; Get the other parameters; they're attached to the service parameters key ; Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) goto fatalregistry endif Set KeyParameters = $($R2) ; ; We don't need the services key, so close it. ; CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) adaptersetup = + Debug-Output $(ProductInfName)": InstallOption: adaptersetup = label Entered" Set from = adapteroptions adapteroptions = + Debug-Output $(ProductInfName)": InstallOption: adapteroptions = label Entered" read-syms FileDependentDlg$(!STF_LANGUAGE) ;***08-26-96 Greg White commented out ;adapterverify = + ; Debug-Output $(ProductInfName)": InstallOption: aqdapterverify = label Entered" ; ; ; Set from = adapteroptions ; Set to = skipoptions ; Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING ; ifint $($ShellCode) != $(!SHELL_CODE_OK) ; Debug-Output "ShellCode error: cannot get an error string." ; goto ShellCodeError ; endif ; set Error = $($R0) ; goto Warning ; ; If installing, go create the necessary keys; ; if configuring, they're already open. ; skipoptions =+ Debug-Output $(ProductInfName)": InstallOption: skipoptions = label Entered" ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ; ; Add Software Component ; ifint $(OldVersionExisted) == $(FALSE) Debug-Output $(ProductInfName)": About to execute install Install-Option" install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), + $(ProductInfName), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; ; At this point: ; $R1 contains the product version key handle; ; $R2 contains the NetRules subkey handle; ; $R3 contains the new Services key handle; and ; $R4 contains the Parameters key ; $R5 contains the Linkage Key ; set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {EngVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductEngVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, + {Infname,$(NoTitle),$(!REG_VT_SZ),$(ProductInfName)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif ; ; Create the HARDWARE\Netcard region and its corresponding service ; Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(ProductInfName),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif ; ; At this point: ; $R1 Registry key variable for HARDWARE\Netcard\(n) ; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules ; $R3 Registry key handle for <service>\Parameters key ; $R4 Adapter number assigned to adapter ; $R5 Service name generated by combining svc name with adapter number ; Set KeyParameters = $($R3) Set KeyAdapterRules = $($R2) Set AdapterNumber = $($R4) Set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) Set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" Set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, + {Infname,$(NoTitle),$(!REG_VT_SZ),$(ProductInfName)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters ; ; REQUIRED: $(KeyParameters) contains service Parameters key handle ; writeparameters = + ; ; Add version label ; Set NewValueList = {{CLSGUID,$(NoTitle),$(!REG_VT_SZ),"{0501BD07-A25B-11d3-AD24-00A0F8FFFF62}"},+ {NetType,$(NoTitle),$(!REG_VT_SZ),"WLAN"}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) FlushRegKey $(KeyParameters) CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error. (Add Value List)" goto ShellCodeError endif ; Notify WE7NCPA to update it's stored parameters ;LoadLibrary "Setup Disk #1" $(szDLLPath) LibHand LibraryProcedure ResultList, $(LibHand), CmdWriteToRegistry $(KeyParameters) FreeLibrary $(LibHand) bail_out=+ Debug-Output "Just called AddValueList, KeyParameters" Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful ;----------------------------------------------- ; Binding section ;----------------------------------------------- bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal ;----------------------------------------------- ; Removeadapter section ;----------------------------------------------- removeadapter = + Debug-Output "Remove Adapter ProductKeyName "$(ProductKeyName) Debug-Output "Remove Adapter NTN_RegBase "$(!NTN_RegBase) ; remove installed files AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\WE7x7ND4.SYS" AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\WE7NCPA.DLL" AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\WE7NCPA.HLP" AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\"$(ProductInfName) Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ;----------------------------------------------- ; Upgrade Software section ;----------------------------------------------- UpgradeSoftware = + ; Upgrade software component ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) Debug-Output "Maximum_Allowed Key Product is NULL" endif Ifstr $(KeyProduct) != $(KeyNull) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif ; Upgrade the version number ; SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} SetRegValue $(KeyProduct) {EngVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductEngVersion)} SetRegValue $(KeyProduct) {SlaVersion,$(NoTitle),$(!REG_VT_SZ),$(SlaVersion)} ; ; do nothing for update ; CloseRegKey $(KeyProduct) ; Update Transport ;**08-20-96** Added remove diskette reminder message **** Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "STATUS" "Please remove the AirConnect WLAN Adapter Install diskette from the diskette drive" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif else ; ; Cannot Open software key, goto ERROR ; goto fatalregistry endif Goto end ; ; End of Upgrade Software ; ; ; Escape hatches ; successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ; ; warning display ; warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif ; ; non fatal error display ; nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif ; ; Registry is broken ; fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal ; ; Netcard detection failure ; fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) goto fatal ; ; fatal error display ; fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ; ; Shelling error ; ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ; ; if OEM_ABANDON_ON == TRUE, then remove the registry entries ; ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) ;*************************************************************** ; INSTALL SECTIONS ;*************************************************************** [Install-Option] Set STF_VITAL = "" Ifstr(i) $(AddCopy) == "YES" ; ; Add the files to the copy list ; AddSectionFilesToCopyList Files-$(Option) $(SrcDir)WINNT\$(!STF_PLATFORM) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-NCPA $(SrcDir)NDIS5 $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) Endif ifstr(i) $(DoCopy) == "YES" ; ; Copy files in the copy list ; set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif exit [Install-Update] set STF_VITAL = "1" set STF_OVERWRITE = "ALWAYS" ;set SrcDir = "A:\" ;ClearCopyList ; ; Add the files to the copy list ; AddSectionFilesToCopyList Files-$(Option) $(SrcDir)WINNT\$(!STF_PLATFORM) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-NCPA $(SrcDir)NDIS5 $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit ;------------------------------------------------ [Source Media Descriptions] ;------------------------------------------------ ; - This is a required detect section. ; - It is used to identify the disk where files are ; kept ; - Changing this from the original version did ; not cuase the "detect error" to go away. ;------------------------------------------------ 1 = "3Com WE7x7 Wireless LAN Driver Installation Disk", TAGFILE = WE7DISK ;------------------------------------------------ [Signature] ;------------------------------------------------ ; - This is used in an enumeration command ;------------------------------------------------ FileType = MICROSOFT_FILE ;------------------------------------------------ [GetSignature] ;------------------------------------------------ ; - Does not appear to be used. ;------------------------------------------------ read-syms Signature return $(FileType) ;------------------------------------------------ [ProductType] STF_PRODUCT = WINNT STF_PLATFORM = I386 ;------------------------------------------------ ; Format: Disk Id#, Filename, Options ;------------------------------------------------ [Files-Inf] 1,oemsetup.inf, SIZE=70000, RENAME=$(ProductInfName) [Files-WE7x7] 1,WE7x7ND4.SYS, OVERWRITE=ALWAYS, COPY, DESTINATION=$(!STF_WINDOWSSYSPATH)\Drivers, SIZE=50000 [Files-NCPA] 1,WE7NCPA.DLL, OVERWRITE=ALWAYS, COPY, DESTINATION=$(!STF_WINDOWSSYSPATH), SIZE=80000 1,WE7NCPA.HLP, OVERWRITE=ALWAYS, COPY, DESTINATION=$(!STF_WINDOWSSYSPATH), SIZE=50000 [Files-WE7x7PCI] 1,WE7x7ND4.SYS, OVERWRITE=ALWAYS, COPY, DESTINATION=$(!STF_WINDOWSSYSPATH)\Drivers, SIZE=50000 ;------------------------------------------------ [LanguagesSupported] ;------------------------------------------------ ; - This is used in an enumeration command ; - The languages supported by the OEM INF, ; For every language supported we need to ; have a separate text section for every ; displayable text section. ; ;------------------------------------------------ ENG ;------------------------------------------------ [OptionsTextENG] ;------------------------------------------------ ; - Does not appear to be used. ; - These are text strings used to identify the ; option to the user. There are separate ; sections for each language supported. The format ; of the section name is "OptionsText" concatenated ; with the Language represented by the section. ; ;------------------------------------------------ WE7x7 = "3Com 3CRWE737A AirConnect Wireless LAN PC Card" WE7x7PCI = "3Com 3CRWE777A AirConnect Wireless LAN PCI Card" [Install-SeeIfFileIsPresent] LibraryProcedure STATUS,$(!LIBHANDLE), CheckFileExistance $(FileToCheck) exit ;------------------------------------------------ [FileConstantsENG] ;------------------------------------------------ ; - Language-Dependent Dialog Constants ;------------------------------------------------ ;--- Variables to support thermometer gauge and error dialogs ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ;--- Product Info FunctionTitle = "3Com AirConnect Wireless LAN Adapter Setup" ;--- Software ProductSoftwareTitle = "3Com AirConnect Wireless LAN Adapter Driver" ProductSoftwareDescription = "3Com AirConnect Wireless LAN Adapter Driver" CANNOT_FIND_ANY_CARD = "Network card is not present in the system" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." [OemOptionFiles] OemFiles = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\oemnad*.inf" ;------------------------------------------------ [DialogConstantsENG] ;------------------------------------------------ ; - Does not appear to be used. ;------------------------------------------------ ;--- Common button names, etc. Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" ;------------------------------------------------ [FileDependentDlgENG] ;------------------------------------------------ ; - Does not appear to be used. ;------------------------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.