;
; JMicron Driver Setup Program Sample Ini File
;
[Startup]
; Product Specific Setup Package GUID
ProductGUID={96DCEE2F-98EE-4F80-8C0F-7C04D1FB9D7F}
[Install_Setting]
;Customize INF file name
InfName=JME.inf
; If SupportDriverPreInstall = 1, indicate that setup package "support driver preinstall". Otherwise, indicate NOT support.
; Preinstall is only valid for WHQL driver. Setup program will return fail with preinstall+Non-WHQL driver case.
SupportDriverPreInstall=1
; If RebootNotRequiredAfterSetupDriver = 1, indicate that "Reboot is NOT required after driver setup". Otherwise, reboot is required.
RebootNotRequiredAfterSetupDriver=1
; If NoUninstallMenu = 1, setup program would not set registry for "Add/Remove Program" menu.
NoUninstallMenu=0
; If CreateStartMenuShortcut = 1, setup program would Create StartMenu Shortcut for Uninstall
CreateStartMenuShortcut=0
; If RemoveAllDriverFromDriverStore =1, setup program would Remove all installed inf of the same inf name during uninstall
RemoveAllDriverFromDriverStore=1
; CustomizedSettingCount indicate "the total number of CustomizedSetting".
CustomizedSettingCount=60
; [Customized Settings Definition]
; CustomizedSetting1: Enable Customized Setting. Bit Definition would be appended later
; CustomizedSetting2: Customized Settings. Bit Definition would be appended later
; CustomizedSetting3: LED0 Setting (JMC25x)
; CustomizedSetting4: LED1 Setting (JMC25x)
; CustomizedSetting5: LED2 Setting (JMC25x)
; CustomizedSetting6: D3E Waiting Minutes (Max 65535)
; CustomizedSetting9: LED0 Setting (JMC26x)
; CustomizedSetting10: LED1 Setting (JMC26x)
; CustomizedSetting11: LED2 Setting (JMC26x)
; CustomizedSetting12: Maximum Tx/Rx IREQ
; CustomizedSetting13: Customized Settings for PHY (JMC25x)
; CustomizedSetting14: Customized Settings for PHY (JMC26x)
; CustomizedSetting15: Customized Settings Tx DMA size
; [CustomizedSetting1 Bit Definition]
; Bit_0 : Enable customized auto-speed-down setting
; Bit_1 : Enable customized PHY link-down-power-saving-mode setting for D3E
; Bit_2 : Enable customized wakeup-on-link-raised setting
; Bit_3 : Enable customized LED setting (JMC25x)
; Bit_4 : Enable customized wakeup-from-S5 setting
; Bit_5 : Enable customized LED setting (JMC26x)
; Bit_6 : Enable customized LED blink rate setting
; Bit_7 : Enable customized device-sleep-on-disconnect setting
; Bit_8 : Enable customized PM ARP offload setting
; Bit_9 : Enable customized PM NS offload setting
; Bit_12: Enable customized LPI setting
; Bit_13: Enable S4/S5 WOL on DC mode
; Bit_14: Enable customized PHY link-down-power-saving-mode setting for D3 mode
; [CustomizedSetting2 Bit Definition]
; Bit_0 : Enable auto-speed-down (0/1)
; Bit_1_2 : PHY Link-down-power-saving mode for D3E (0~2)
; Bit_3 : Enable wakeup-on-link-raised (0/1)
; Bit_4 : Enable wakeup-from-S5 (0/1)
; Bit_5_7 : LED blink rate (0~4) 42ms/84ms/170ms/340ms/670ms
; Bit_8 : Enable device-sleep-on-disconnect(0/1)
; Bit_9 : Enable PM ARP offload(0/1)
; Bit_10 : Enable PM NS offload(0/1)
; Bit_11 : Enable LPI(0/1)
; Bit_12_13: PHY Link-down-power-saving mode for D3 mode (0~2)
; [CustomizedSetting3/4/5/9/10/11 Bit Definition]
; Bit_0_3 : S0, LED mode
; Bit_4_7 : S1, LED mode
; Bit_8_11 : S3, LED mode
; Bit_12_15 : S4, LED mode
; Bit_16_19 : S5, LED mode
; [CustomizedSetting7 Bit Definition]
; Bit_2 : Disable link-down-power-saving-interleave-mode (0/1)
; Bit_3 : Disable WOL from D3E (0/1)
; Bit_5 : Enable link delay (0/1)
; [CustomizedSetting12 Bit Definition]
; Bit_0_15 : Tx Maximum IREQ
; Bit_16_31 : Rx Maximum IREQ
; [CustomizedSetting13/14 Bit Definition]
; Bit_0_15 : Value
; Bit_16_31 : Index
; [CustomizedSetting 15 Bit Definition]
; Bit_0_2 : Tx DMA size
; [CustomizedSetting17 Bit Definition]
; Bit_0_31 : Enable PHY(_) setting
; [CustomizedSetting33 Bit Definition]
; Bit_0_4 : Enable PHY(_) extension setting
; [CustomizedSetting34 Bit Definition]
; Bit_0_15 : Value
; Bit_16_31 : Index
CustomizedSetting1= 0x000000D5
CustomizedSetting2= 0x00000051
CustomizedSetting3= 0x00011111
CustomizedSetting4= 0x00077777
CustomizedSetting5= 0x00077777
CustomizedSetting6= 0x00000006
CustomizedSetting7= 0x60518100
CustomizedSetting8= 0x00000132
CustomizedSetting9= 0x00044444
CustomizedSetting10=0x00077777
CustomizedSetting11=0x00077777
CustomizedSetting12=0x00000000
CustomizedSetting13=0x00000000
CustomizedSetting14=0x00000000
CustomizedSetting15=0x00000000
CustomizedSetting16=0x00010001
CustomizedSetting17=0x00000000
CustomizedSetting18=0x00000000
CustomizedSetting19=0x00000000
CustomizedSetting20=0x00000000
CustomizedSetting21=0x00000000
CustomizedSetting22=0x00000000
CustomizedSetting23=0x00000000
CustomizedSetting24=0x00000000
CustomizedSetting25=0x00000000
CustomizedSetting26=0x00000000
CustomizedSetting27=0x00000000
CustomizedSetting28=0x00000000
CustomizedSetting29=0x00000000
CustomizedSetting30=0x00000000
CustomizedSetting31=0x00000000
CustomizedSetting32=0x00000000
CustomizedSetting33=0x00000000
CustomizedSetting34=0x00000000
CustomizedSetting35=0x00000000
CustomizedSetting36=0x00000000
CustomizedSetting37=0x00000000
CustomizedSetting38=0x00000000
CustomizedSetting39=0x00000000
CustomizedSetting40=0x00000000
CustomizedSetting41=0x00000000
CustomizedSetting42=0x00000000
CustomizedSetting43=0x00000000
CustomizedSetting44=0x00000000
CustomizedSetting45=0x00000000
CustomizedSetting46=0x00000000
CustomizedSetting47=0x00000000
CustomizedSetting48=0x00000000
CustomizedSetting49=0x00000001
CustomizedSetting50=0x00000000
CustomizedSetting51=0x00000000
CustomizedSetting52=0x00000000
CustomizedSetting53=0x00000000
CustomizedSetting54=0x00000000
CustomizedSetting55=0x00000000
CustomizedSetting56=0x00000000
CustomizedSetting57=0x00000000
CustomizedSetting58=0x00000000
CustomizedSetting59=0x00000000
CustomizedSetting60=0x00000000
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.