readme.txt Driver File Contents (Stellaris_ODW.zip)

GPIO JTAG Recovery

This example demonstrates changing the JTAG pins into GPIOs, along with a
mechanism to revert them to JTAG pins.  When first run, the pins remain in
JTAG mode.  Pressing the select push button will toggle the pins between
JTAG mode and GPIO mode.  Because there is no debouncing of the push button
(either in hardware or software), a button press will occasionally result
in more than one mode change.

In this example, all five pins (PB7, PC0, PC1, PC2, and PC3) are switched,
though the more typical use would be to change PB7 into a GPIO.

-------------------------------------------------------------------------------

Copyright (c) 2006-2009 Texas Instruments Incorporated. All rights reserved.
Software License Agreement

Texas Instruments (TI) is supplying this software for use solely and
exclusively on TI's microcontroller products. The software is owned by
TI and/or its suppliers, and is protected under applicable copyright
laws. You may not combine this software with "viral" open-source
software in order to form a larger program.

THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, FOR ANY REASON WHATSOEVER.

This is part of revision 5451 of the EK-LM3S8962 Firmware Package.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.85