CAN FIFO mode example This application uses the CAN controller in FIFO mode to communicate with the CAN device board. The CAN device board must have the can_device_fifo example program loaded and running prior to starting this application. This program expects the CAN device board to echo back the data that it receives and this application will then compare the data received with the transmitted data and look for differences. This application will then modify the data and continue transmitting and receiving data over the CAN bus indefinitely. \note This application must be started after the can_device_fifo example has started on the CAN device board. ------------------------------------------------------------------------------- Copyright (c) 2009 Texas Instruments Incorporated. All rights reserved. Software License Agreement Texas Instruments (TI) is supplying this software for use solely and exclusively on TI's microcontroller products. The software is owned by TI and/or its suppliers, and is protected under applicable copyright laws. You may not combine this software with "viral" open-source software in order to form a larger program. THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. This is part of revision 5451 of the EK-LM3S8962 Firmware Package.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.