.topic HIDC_CHANNEL1_FIND Pressing this button will move and scale the waveform for channel 1 to make it visible on the display. .topic HIDC_CHANNEL2_FIND Pressing this button will move and scale the waveform for channel 2 to make it visible on the display. .topic HIDC_CHANNEL1_SCALE This control allows the voltage scale for channel 1 to be adjusted. .topic HIDC_CHANNEL2_SCALE This control allows the voltage scale for channel 2 to be adjusted. .topic HIDC_CHANNEL1_POS This control allows the vertical position of the channel 1 waveform to be adjusted. .topic HIDC_CHANNEL2_POS This control allows the vertical position of the channel 2 waveform to be adjusted. .topic HIDC_TRIGGER_TYPE Select the trigger type you want to use with this control. .topic HIDC_ENABLE_CH2 This control enables or disables the second channel. .topic HIDC_TRIGGER_CH1 This radio button selects triggering from the channel 1 signal. .topic HIDC_TRIGGER_CH2 This radio button selects triggering from the channel 2 signal when it is enabled. .topic HIDC_START_STOP This button can be used to start or stop continuous capture. .topic HIDC_CAPTURE When continuous capture is stopped, pressing this button will set up for a single capture using the current trigger settings. .topic HIDC_TRIGGER_LEVEL This slider sets the trigger level in millivolts. .topic HIDC_TIMEBASE The oscilloscope timebase is set using this control. .topic HIDC_TRIGGER_POS This slider can be moved to change the trigger position allowing you to see the waveform before or after triggering. .topic HIDC_CH1_MIN This field shows the minimum voltage measured for channel 1 in the last captured waveform. .topic HIDC_CH1_MAX This field shows the maximum voltage measured for channel 1 in the last captured waveform. .topic HIDC_CH1_MEAN This field shows the mean channel 1 voltage in the last captured waveform. .topic HIDC_CH2_MIN This field shows the minimum voltage measured for channel 2 in the last captured waveform. .topic HIDC_CH2_MAX This field shows the maximum voltage measured for channel 2 in the last captured waveform. .topic HIDC_CH2_MEAN This field shows the mean channel 2 voltage in the last captured waveform. .topic HIDC_CHANNEL1_POS_TEXT This field shows the vertical offset for channel 1. .topic HIDC_CHANNEL2_POS_TEXT This field shows the vertical offset for channel 2. .topic HIDC_TRIGGER_LEVEL_TEXT This field shows the current trigger level in volts. .topic HIDC_WAVEFORM This area of the displays represents the captured waveform(s). You can change the elements show using the "Display Options..." entry on the system menu (top left). .topic HIDOK Press this button to end the oscilloscope application.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.