################################################################################ Title: RTL8169S/RTL8110S PXE Boot ROM Program History: V1.00 -- 2003.09.23 Notes: ################################################################################ Name: RTGBPXE.100 Version: V1.00 Released By: Season Chen Release Date: 2003.09.23 Changed File: new Notes: Developed from rtgbpxe.101 ################################################################################ ###################################################################### ########## Name: RTGBPXE.120 Version: V1.20 Released By: Leo Kuo Release Date: 2004.09.01 Changed File: new Notes: Developed from rtgbpxe.120 ################################################################################ ###################################################################### ####################################################################################################### Name: RTGBPXE.140 Version: V1.40 PXE Version: V1.40(build 082) Released By: Leo Kuo Release Date: 2004.12.16 Changed File: change nic.asm in undi/stub Changed Item: Clear ISR register after Cmd reset in RESETNIC subroutine Reason: 1. Fix Exiting PXE ROM hang problem. 2. Fixed TFTP Request sent to Gateway problem.(See bootp.c GETBOOTINFO function) ####################################################################################################### Name: RTGBPXE.150 Version: V1.50 PXE Version: V1.50(build 082) Released By: Leo Kuo Release Date: 2005.04.28 Changed File: change init.asm romconfig.r in undi/init , nic.asm Changed Item: Disable TxRx before queue setup, turned on analog power Reason: 1. Fix system showing error message problem when lan received packets during power on stage. 2. Turn the chip’s analog power back on when it enters the S3 or S4 state in the previous poweroff stage. 3. Fix show message = 0 sc, no link problem 4. In ResetNIC, turn off IMR because upper level application may not want to receive data. ###################################################################################################### Name: RTGBPXE.151 Version: V1.51 PXE Version: V1.51(build 082) Released By: Leo Kuo Release Date: 2005.06.22 Changed File: Changed bootp.c under base/run Changed Item: Changed the method of fining correct Boot Server IP address. Reason: 1. Fixed find wrong Boot Server IP problem. ####################################################################################################### ###################################################################################################### Name: RTGBPXE.152 Version: V1.52 PXE Version: V1.52(build 082) Released By: Leo Kuo Release Date: 2005.12.28 Changed File: Changed bootp.c under base/run Changed Item: 1. Remove the set server ip address to source ip address when server ip address is NULL command. 2. Implement new phy parameters for 8169S to fix long link issue with some gigabit switch. 3. When PCI device scans for PCI bridge, it only checks base class(06) and sub-base class code(04) and does not check the programming interface. ####################################################################################################### ###################################################################################################### Name: RTGBPXE.153 Version: V1.53 PXE Version: V1.52(build 082) Released By: Leo Kuo Release Date: 2006.1.23 Changed File: Changed nic.asm under undi/stub Changed Item: 1. Instead of checking the link status bit to see if there is a link. Check the power save bit to determine if cable is connected. ####################################################################################################### ###################################################################################################### Name: RTGBPXE.154 Version: V1.54 PXE Version: V1.54(build 082) Released By: Leo Kuo Release Date: 2006.10.05 Changed File: Changed nic.asm under undi/stub Change back bootp.c to the original file. Changed Item: 1. In driver resetNIC routine, clear multicast register after reboot. ####################################################################################################### ###################################################################################################### Name: RTGBPXE.170b Version: V1.70b PXE Version: V1.70b(build 082) Released By: Leo Kuo Release Date: 2006.11.06 Changed File: Changed nic.asm under undi/stub Changed Item: 1. Only write phy parameters once in the initilization routine because contiunous initilization rountine calls will degrade the performance. ####################################################################################################### ###################################################################################################### Name: RTGBPXE.171b Version: V1.71b PXE Version: V1.71b(build 082) Released By: Leo Kuo Release Date: 2007.7.30 Changed File: Changed makerom.exe Changed Item: 1. Make the .nic code aligned. #######################################################################################################Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.