/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Denver Gingerich's USBSnoop Magnetic Card Reader Project * * Firmware for a USB AVR powered USB TTL magnetic stripe reader (using a card * reader such as the Omron V3B-4K) by Denver Gingerich. This project is designed * to be used with the open source Stripe Snoop project at http://stripesnoop.sourceforge.net/. * * See http://ossguy.com/ss_usb/ for the USB reader hardware project website, * including construction and support details. * * To use, connect your magentic card reader device to the USB AVR as follows (pin and port mapping may be adjusted * from the project makefile): * * <table> * <tr> * <td><b>Signal:</b></td> * <td><b>AVR Port:</b></td> * </tr> * <tr> * <td>Track 1 Data</td> * <td>PORTC, Pin 1</td> * </tr> * <tr> * <td>Track 1 Clock</td> * <td>PORTC, Pin 2</td> * </tr> * <tr> * <td>Track 2 Data</td> * <td>PORTC, Pin 3</td> * </tr> * <tr> * <td>Track 2 Clock</td> * <td>PORTC, Pin 0</td> * </tr> * <tr> * <td>Track 3 Data</td> * <td>PORTC, Pin 5</td> * </tr> * <tr> * <td>Track 3 Clock</td> * <td>PORTC, Pin 6</td> * </tr> * <tr> * <td>Card Detect</td> * <td>PORTC, Pin 4</td> * </tr> * </table> * * * This project is based on the LUFA Keyboard demonstration application, * written by Denver Gingerich. * * This application uses a keyboard HID driver to communicate the data collected * a TTL magnetic stripe reader to the connected computer. The raw bitstream * obtained from the magnetic stripe reader is "typed" through the keyboard * driver as 0's and 1's. After every card swipe, the demo will send a return key. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Device</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>Keyboard</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>USBIF HID Standard, USBIF HID Usage Tables</td> * </tr> * <tr> * <td><b>Usable Speeds:</b></td> * <td>Low Speed Mode, Full Speed Mode</td> * </tr> * </table> */Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.