[Setup] Caption=Printer Driver Setup Help=Press"F1"for help Install=Install (&I) Back=<<Back(&B) Next=Next (&N)>> Cancel=Cancel (&C) Close=Please close Printer Driver Setup program first! Nonsupport= Nonsupport Windows98! PortNull= Please config port! CaptionName = SNBC print system setup [Legal] Agreement=Legal Agreement Accept=I Accept Reject=I Reject [Series] Select=Select Install Module Receipt=Receipt Ticket=Ticket Label=Label Embedded=Embedded Default=Set As Defautl Printer [Mode] Type=Setup Type Typical=Typical Advanced=Advanced Remarks=Remarks: Note1=Install default printer driver Note2=Support multi-USB printer Note3=Support driver mode selection [Help Guide] Caption=Printer Driver Installer Name=Guide.chm [System] Select=Select Install OS [Confirm] Set=Set Printer Port Ports=Ports: Com=COM port setting BaudRate=Baud Rate: Parity=Parity: ByteSize=Byte Size: StopBits=Stop Bits: Protocol=Protocol: Raster=Raster Graphic Printing Parity.Even=Even Parity.Mark=Mark Parity.None=None Parity.Odd=Odd Parity.Space=Space Protocol.None=None Protocol.Xonoff=Xon/Xoff Protocol.Hardware=Hardware [Progress] Wait=Installing Printer,Please Wait...... [About] Caption=About PrinterDriverSetup OK=OK Version=PrinterDriverSetup Version 4.13 Copyright=Copyright (C) 2005-2010 [Message] IDS_ABOUTBOX=&About Printer Driver Setup... IDS_ADMIN=You must be logged on the computer as an administrator! IDS_ERR_GETSYSDIR=Cannot get system directory IDS_ERR_TOOMANY=Maximum count of printers using the same port has been reached IDS_ERR_ALLOCMEMORY=Printer installer could not allocate sufficient memory IDS_ERR_ENUMPRINTERDRIVER=Enumerate printer drivers error IDS_ERR_UPDATEMON=Source is in use, To update port monitor.\1Please remove printers occupied "USB_*" or "bycom " port from control panel first! IDS_ERR_GETCURDIR=Cannot get current system directory IDS_ERR_GETDRIVERDIR=Cannot get printer driver directory IDS_ERR_GETPRODIR=Cannot get printer processor directory IDS_ERR_DIRTYPE=Direcory type error IDS_ERR_UPDATEPROCESSOR=Source is in use,to update Processor.\1Remove Serial-port printers from control panel first! IDS_ERR_SELPRINTER=You must select a printer module first! IDS_ERR_NOSUPPORTUSB=WindowsNT4 and earlier editions do not support USB ports IDS_INF_RESTART=Restart the computer so that the changes can take effect\1Click on "Yes" to restart the computer immediately\2Click on "No" to restart the computer later IDS_ERR_SYSTEM=This driver doesn't work on this system.\1Please click "Cancel" button to cancel this program. IDS_ERR_ADDPRINTER=Add printer error IDS_ERR_ADDDRIVER=Add driver error IDS_ERR_ADDPRNDRV3=Add printer driver error IDS_ERR_ADDMONITOR=Add monitor error! IDS_ERR_DELDRIVER=Delete driver error IDS_ERR_DELMONITOR=Delete monitor error IDS_ERR_COPYFIEL=Copy driver files error,files name: IDS_ERR_COPYFIEL1=Please check the integrity of the installation package! IDS_ERR_ADDPROCESSOR=Add printer processor error \1Fatal error,try rebooting the system. IDS_ERR_DELPROCESSOR=Delete printer processor Error IDS_ERR_ENUMPORTS=Enum ports error IDS_ERR_GETWINDIR=Cannot get windows directory IDS_ERR_EXITWIN=Exit windows error IDS_ERR_OPENTOKEN=Open process token error IDS_ERR_ADJUSTTOKEN=Adjust token privileges error IDS_ERR_SAMEPRINTER=The exact same printer has been installed IDS_INF_NTRESTART=Successfully installed printer driver IDS_OLEINITFAILED=OLE initiation failed IDS_INF_USBRESTART=Successfully installed printer driver\1Please repower the printer IDS_ERR_NOUSBDEVICE=No USB device attached IDS_ERR_NOSUPPORTINTERFACE=No support installation for this port IDS_ERR_NEEDRESTART=Fatal error, try rebooting the system IDS_ERR_LOSTDRIVERFILE=Lost of driver files, can't continue IDS_INF_CHANGEID=This application will change printer name \1the name will be matching with interface name\2If continue, click on "Yes"\3Otherwise click on "No" IDS_ERR_ONEPRINTER=Connect just one USB printer to host IDS_NOTSUPPORT2003=This printer not support WINDOWS SEVER 2003 IDS_NOTSUPPORT2008=This printer not support WINDOWS SEVER 2008 IDS_NOTSUPPORTWIN7=This printer not support WINDOWS 7 IDS_NOTSUPPORTVISTA=This printer not support WINDOWS VISTA IDS_ERR_NOLEFT=Can't load file Left.bmp! IDS_ERR_NOLICENSE=Can't load file License.txt! IDS_ERR_UPDATEUSB=1:Please connect USB cable to printer and power on it\22:Please Cancel USB device driver pop-up installation\33:Please press the "Install(I)"button to continue IDS_NOTSUPPORTVISTA=This printer not support Windows Vista IDS_ERR_INSTALLUSB=You need to install the USB device driver! IDS_TYPICAL_NOTES=Install default printer driverDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.